development kit News - Page 28 of 40 - CNX Software

May 13, 2014May 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Compulab Introduces $75 CM-QS600 Computer-on-Module Powered by Qualcomm Snapdragon 600 SoC

CompuLab has just announced their CM-QS600 Computer-on-Module (CoM) powered by Qualcomm Snapdragon APQ8064 quad-core SoC with up to 2GB DDR3 RAM, up 32GB of on-board eMMC, dual-band WiFi 802.11, Bluetooth 4.0, and Gigabit Ethernet network connectivity, as well as PCIe, USB, SATA, HDMI, LVDS, serial ports and I/O lines. CM-QS600 targets multimedia applications such as digital signage, IPTV and media players requiring low power, and a small form factor. Compulab CM-QS600 specifications: SoC – Qualcomm Snapdragon APQ8064 quad core Krait 300 processor @ 1.7GHz with Adreno 320 GPU and Hexagon QDSP6 DSP System Memory – Up to 2GB DDR3 Storage – Up to 32GB on-board eMMC, SATA interface (via connector) Display HDMI 1.4a, up-to 1920 x 1080 LVDS, up-to 2048 x 1536 Audio – Audio codec with stereo line-out, line-in, mic Camera – MIPI-CSI, up-to 20MP Connectivity – Gigabit Ethernet, Dual-band WiFi 802.11a/b/g/n, Bluetooth 4.0 low-energy Other I/Os PCI Express […]

May 13, 2014May 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

GainSpan Introduces Full HD Video Application Development Kit for Wi-Fi IP Video Streaming Applications

GainSpan, a company providing low-power Wi-Fi solutions for the Internet of Things, and GEO Semiconductor, a semiconductor and software company specializing in camera and video solutions, have recently announced a Full HD resolution Video Application Development Kit (ADK) targeted at Wi-Fi video streaming applications in the surveillance, security and automotive markets such as battery or line powered IP cloud cameras, door bell cameras, baby monitors, toy cameras and automotive backup/drive recorder cameras The development kit features GainSpan GS2011MIZ low power IEEE 802.11b/g/n module, and GEO Semi MAX64380 1080p30 H.264 Camera CODEC, as well as MAXIM MAX9860 mono audio codec, and MAX98300 Class D amplifier. GainSpan Full HD Video ADK (GS-ADK-VideoGeo1080p) key features include: GS2011MIZ module with low power IEEE 802.11b/g/n compliant module with PHY rates up to 72 Mpbs. Supports Limited AP, Wi-Fi Direct with concurrent mode, WPS2.0. Wi-Fi Security – 802.11i, WPA/2, Personal and Enterprise, legacy WEP, TLS Full […]

May 6, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ARM Based COM Express Modules by MEN Mikro Electronik and Pactron

A few days ago, in a post listing different system-on-module (SoM) standards, I mentioned COM Express standard was targeting SoMs based on x86 processors, and SMARC was the equivalent for ARM. I still understand it’s the case as COM Express standard defines mechanical dimensions that are usually larger than SoM standard for low power processors, some buses found in ARM and x86 are different (e.g. AFAIK LPC and PCI are not found in ARM SoC), and the standard supports high power signals which are not needed in ARM or MIPS processors. Having said that, I’ve been pointed out to two ARM based COM Express modules, which could make sense if you want to use an ARM based module using existing COM Express compatible baseboards. The COM Express modules below feature Freescale i.MX6 and Marvell Armada XP SoCs, and have been designed respectively by MEN Mikro Electronik and Pactron. MEN Mikro […]

April 30, 2014April 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Meet Arduissimo, a Multi-core Arduino Board with a 16-core Xilinx Spartan FPGA (Crowdfunding)

Arduissimo a MultiCore Arduino project based on an FPGA Arduino Board powered by Xilinx Spartan LX6. It supports virtual peripherals, and allows you to configure PWMs, I2Cs, SPIs, and more on any of the 124 General Purpose IOs available through the board. Arduissimo specifications: FPGA – Xilinx Spartan-6 LX16 CSG326 -2 System Memory SDRAM Interface 1 – 1x 256MBit, 4x 64MBit, 166MHz SDRAM Interface 2 – 1x 64MBit, 166MHz Storage – EEprom for configuration file + micro SD card slot (4 pins connected to FPGA) USB – High Speed USB, FTDI HS2232HL (13 pins for “245 fifo sync” connected to the FPGA) 124 IOs: 4 IOs – 2.54mm header (e.g. Raspberry Pi) 72 IOs: Arduino Mega footprint (44 IOs shared with uPlug) 92 IOs: 8 uPlug connector slots (44 IOs shared with Arduino Mega) 50MHz oscillator Misc – Reset switch, 1x yellow LED, 4x bumpers Dimensions – 98.5 mm x […]

April 29, 2014April 29, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

HOWCHIP 5420-DVK is a Mobile Development Kit with Samsung Exynos 5420 SoC, an OLED Display

With Arndale Octa already shipping, and the upcoming ODROID-XU2, we already have two low cost boards with Samsung Exynos 5420 big.LITTLE processor for less than $200. But if you want a more complete kit, HOWCHIP 5420-DVK with a 4.65″ OLED display and capacitive touchscreen, 2GB RAM, 4GB eMMC, and various connectors, could be an option. There’s also a Lite version without the OLED display. The board is composed of a CPU module, a baseboard, and a phone like display. Here are the specifications: SoC – Samsung Exynos 5420 Octa with 4x ARM Cortex A15, and 4x ARM Cortex A7 in big.LITTLE configuration, with Mali-T628 GPU. System Memory – 2GB LPDDR3 (POP with CPU) Storage – 4GB eMMC 4GB on board, SD card Slot Video Output HDMI type A connector MIPI DSI header up to 1980×1080 eDP (Embedded Display Port) header up to 2560×1600 Display – 4.65″ OLED (1280×720) with touch […]

April 28, 2014May 1, 2014 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

$15 AsiaRF AWM002 & AWM003 Wi-Fi Modules Run OpenWRT, Expose GPIOs

This week-end I explained how to build a web server that could be used for automation and other Internet of things applications for less than $15 by combining an Arduino Leonardo with ECN18J60 Ethernet module. The hardware itself is cheap, but it may not always be convenient, or cost effective, to wire your house or office with Ethernet cables. One solution is to use Wi-Fi modules such as TI CC3000 evaluation module, an Electric Imp module, or Ariettea G25 + Wi-Fi board, but these usually cost between $30 to $50 in single quantity. AsiaRF AWM002 and AWM003 are low cost 802.11n Wi-Fi modules with access to GPIOs that could be an interesting alternative as they cost $15 + shipping, and even below $10 in quantities. The only difference between the two is that AWM003 supports more RAM (64MB vs 32MB). Here are the specifications for these modules: SoC – Mediatek/Ralink […]

April 24, 2014April 24, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Xilinx Zynq-7000 All Programmable SoC Mini-Module Plus System-on-Module

In January 2014, Avnet announced Xilinx Zynq-7000 All Programmable SoC Mini-ITX board featuring Xilinx Zynq-7045 or Zynq-7100 ARM + FPGA SoC, and more recently, the company has launched “Xilinx Zynq-7000 All Programmable SoC Mini-Module Plus” systems-on-module (SoM) based on the same platforms, as well as a corresponding development kit including a baseboard and a power module. The SoM and development platform target PCI Express, embedded controllers, general-purpose prototyping, networking and communications, storage and servers, and Ethernet/Internet applications. Xilinx Zynq-7000 Mini-Module Plus specifications: SoC- Xilinx Zynq-7045 or Zynq-7100 dual core Cortex-A9 @ up to 1GHz with FPGA (350K or 444K logic cells) System Memory – 1GB DDR3 SDRAM Storage – 128MB parallel flash, 32MB QSPI flash, 8KB EEPROM, and micro SD slot Connectivity – Gigabit Ethernet USB – USB 2.0 OTG port Debugging – USB UART, JTAG programming/configuration port, PJTAG header User’s IO via dual board-to-board connectors: 132 User I/O (66 […]

April 19, 2014November 23, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedian SMART MEN and SMART BEE SBCs Feature a TI Sitara SMARC CoM

Embedian, an embedded company specialized in computers-on-module and single board computers, has recently unveiled SMART MEN and SMART BEE single board computers powered by their SMARC-T335X computer-on-module, compliant with the SMARC (Smart Mobility Architecture) standard, and based on Texas Instruments Sitara AM335x SoCs. SMART MEN SBC SMART MEN single board computer specifications: SoC – Texas Instrument Sitara AM335X ARM Cortex-A8 at 600MHz, 800MHz or 1GHz System Memory – 512MB DDR3 (303Mhz x 2) Storage – 4GB eMMC Flash (eMMC 5.0), 4MB SPI NOR Flash, AT24C32 EEPROM, and SDHC/SDIO slot Connectivity – 2 x 10/100 Mbps Ethernet (vertical RJ45) Display – single channel LVDS 18-bit color depth, single channel LVDS 24-bit color depth. LCD LED backlight driver onboard USB – 2 x USB 2.0 Host, 1 x USB 2.0 OTG, 1 x Serial-to-USB (Client) Additional Interfaces: 6 x RS232s (transceiver onboard, two with handshaking and one can be configured as RS422/RS485), […]