digital signage News - Page 26 of 29 - CNX Software

October 5, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

AMD G-Series based iBase SI-08 Digital Signage

Ibase announced the SI-08, a digital signage player with an AMD G-Series processor and a DVI output. The device features a 1.6GHz dual-core T56N processor, up to 2GB of RAM and 1TB of disk storage, gigabit Ethernet, a serial port, 2 USB port, an audio jack (in or out) as well as a Mini PCI slot for optional Wi-Fi or Bluetooth. Here are the specifications and features of the iBase SI-08 digital signage player: System Mainboard EB900-16-SI CPU Type AMD G-Series Dual-Core APU (Accelerated Processing Unit): T56N=1.65GHz @ 18W TDP CPU Package 413-BGA Chipset AMD A55M Controller Hub Memory DDR3-1333, up to 4GB Graphics ATi Radeon HD6320 series graphics processing system integrated in APU • DirectX 11 • Direct Compute 11 • Open GL 4.0 • OpenCL 1.1 • UVD3 Hardware Video Decoder – MPEG2, MPEG4, H.264, VC-1, WMV9 • Hybrid-DVI connector supporting CRT, DVI, or HDMI devices LAN 1x […]

October 4, 2011January 18, 2012 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

Xibo Digital Signage on ARM (Beagleboard / Overo)

Xibo (pronounced eX-E-bO) is an open source, multi-display, multi-zone, fully scheduled digital signage solution written in Python (there is also a dotnet version). This is a client /server solution that can run on Windows or Linux. If you are not familiar with Xibo you can visit http://xibo.org.uk/ or/and read my introduction XIBO: An Open Source Digital Signage Server/Client. Since I had not seen digital signage solution running on low cost ARM development platform such as Beagleboard, Pandaboard or Origen, I decided to give the Xibo python client a try using qemu to emulate Gumstix Overo COM (OMAP 3530). Porting Xibo to ARM could provide several benefits compared to x86 platform: Lower hardware cost Lower power consumption (and electricity bill) Smaller form factor allowing easier integration in displays and in transportation (e.g. buses, subway trains). Easier to implement new digital signage features such as touch screen support, 3G connectivity, location based […]

September 30, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

AMD G-Series Based IBase MI958 Mini-ITX Board

Taiwan-based iBase unveiled MI958 Mini-ITX boards built around AMD’s G-Series T56N, T48N and T40N processors. The board supports up to 8GB memory, offers several PCI expansion slots, 2 Ethernet Ports, 8 USB ports, 4 serial ports, 4 SATA ports and supports dual display capability via VGA, DVi-D or LVDS. The MI958 is targeted at digital signage and surveillance systems. Here are iBase MI958 specifications and features: Processor: AMD G-Series dual-core APU T56N (1.65GHz), T48N (1.4GHz) or T40N (1 GHz) Chipset: AMD A55E FCH System Memory: up to 8GB of DDR3 RAM (2x DDR3 DIMM) Expansion Slots: Mini PCI Express slot PCI Express x1 slot PCI slot Networking: 2 x PCI-E Gigabit Ethernet Other I/O: External: VGA DVI-D 2 x Serial port 4 x USB 2.0 Audio: mic in, line in, line out Internal: LVDS 4 x USB 2.0 2 x Serial port 4 x SATA Digital I/O (4 in, 4 […]

September 5, 2011September 5, 2011 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Installing and running Xibo Linux Python Client in Acer Aspire One D255E

I have tried Xibo Linux Python Client 1.3.0 on my Acer Aspire One D255E netbook, here are the steps I followed. Install Ubuntu 10.04 LTS Since the client is only officially supported in Ubuntu 10.04 LTS, I had to install it first. After installation the network (ethernet and wifi) does not work, please visit Installing Ubuntu 10.04 LTS in Acer Aspire One D255E for the instructions to resolve the networking issues as well as make the SD card reader work properly. Upgrade Xibo Server to version 1.3.0 The next step I did was to update the Windows XP server to version 1.3.0. I followed parts of the server installation instructions I previously wrote for version 1.2.0. Download xibo-server-1.3.0.zip Extract its content to c:\xampp\htdocs\xibo Run XAMPP Control Panel and start Apache and Mysql. Go to http://localhost/xibo Enter the admin username and password, it will ask you if you want to do […]

August 24, 2011August 24, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

AMD G-Series Vehicle Computer: Portwell PCS8277

Portwell announced a vehicle PC (The PCS-8277) that features an AMD G-Series processor (T56N), 2 bays for SATA devices, 2 gigabit Ethernet ports, 2 USB port, support for wireless networking (3G, Wifi etc..) and a GPS receiver. This type of device is well suited for applications such as digital signage in public transport (subway, buses). PCS-8277 In-Vehicle PC has the following system and I/O specifications: CPU: AMD G-T56N Dual Core 1.6GHz System Memory: 2 x DDR3 1066MHz SO-DIMM up to 8GB Chipset: AMD A55E Controller Hub lrDA: IrDA (SIR, Consumer IR) with TTL level Audio: Realtek ALC662 HD Codec onboard Expansion: 2 x 2.5” drive bay for SATA Type Hard Disk Drive / SSD SIM Card Socket: 1 x SIM Card socket supported onboard with eject MIO: 3 x RS-232 (2 with RS-422/485) DIO: Port 4 in and 2 out with Relay 12V / 80mA USB: 4 x USB 2.0 […]

August 20, 2011August 20, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Xibo Digital Signage Version 1.3.0 Released

Xibo has just announced the release of Xibo 1.3.0 (codename: “Faye”). Bear in mind that this is a development release and is not supposed to be used in production environments. The next stable release will be version 1.4.0 and The current stable version is 1.2.2. If you would still like to evaluate Xibo 1.3.0, you may download it at https://launchpad.net/xibo/1.3/1.3.0 New features in Xibo 1.3.0: Permissions Overhaul: The most significant change in 1.3.0 is the permissions system in the server interface. This update introduces individual and group permissions for: Layouts Library Media Regions Region Media Assignment It is also now possible to assign permissions to “Everyone” on all of the above items. Media Manager Homepage: A simple user interface for managing layout/media assignments that the user has access to. This “homepage” can be assigned on a user by user basis. Customer Counter: The Python client has been enhanced to support […]

March 29, 2011March 29, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

AMD G-Series based Digital Signage: Ibase SI-18

Ibase announced a digital signage player – the Signature Book SI-18 – based on the dual-core AMD G-Series T56N running at 1.6 GHz. The IBase SI-18 is currently sold with 2GB RAM and a 160GB 2.5″ HDD, but it can support up to 4GB of RAM and 1TB of disk storage. It also features DVI output, gigabit Ethernet, two USB ports, an audio jack, a serial port and a Mini PCI slot for Wi-Fi or Bluetooth support. The device weights 800g and just measures 125.5mm (W) x 125.5mm (L) x 36 mm (H). IBase claims it is the smallest x86 digital signage player in the world. Ibase SI-18 Digital Signage Player Here are Ibase SI-18 specifications: System Mainboard EB900 CPU Type AMD G-Series Dual-Core APU (Accelerated Processing Unit): T56N=1.6GHz @ 18W TDP CPU Package 413-BGA Chipset AMD A55E Controller Hub Memory DDR3-1066 Graphics ATi Radeon HD6310 series graphics processing system […]

March 9, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Video Wall with Beagleboards and ffmpeg

There was a 6-Screen Video Wall at Embedded World 2011, powered by 6 Beagleboard xM (based on Texas Instruments OMAP 3 running @ 1Ghz – Cost: 149 USD / piece), connected vi Ethernet. In the video they explain that the system is running Linux Ångström and the video is played and synchronized over Ethernet with ffmpeg. After doing some research on how to do this, they are probably using omapfbplay with netsync enabled which you can compile as follows: NETSYNC=y OMAPFB=y make However, if you are using Linux Ångström, omapfbplay with netsync is enabled by default. This can also be done with the first version of Beagleboard (without Ethernet) via USB. They can also control each display independently and synchronize the mouse and keyboard thanks to Synergy. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting […]