ESP32-C6-Bug WiFi 6, Bluetooth LE, and 802.15.4 board takes a PoE Ethernet shield (Crowdfunding)

ESP32-C6 PoE board

We’ve already covered a range of ESP32-C6 boards, but none supporting Ethernet and PoE so far, and the ESP32-C6-Bug board brings that to the table thanks to the Esp32-Bug-Eth shield with a W5500 Ethernet chip, an RJ45 jack and a PoE power module. Like other ESP32-C6 devices, the little board supports Wi-Fi 6, Bluetooth LE 5, as well as Thread and Zigbee through its 802.15.4 radio, but it also integrates some other interesting features such as castellated holes for easy soldering on a carrier board and support for LiPo batteries with built-in battery charging and protection circuits. ESP32-C6-Bug board specifications: SoC – ESP32-C6FH4 MCU cores 32-bit RISC-V core @ 160 MHz 32-bit RISC-V core @ 20 MHz low-power coprocessor can run tasks even when the main system is in deep sleep state Memory – 512 KB SRAM Storage – 4 MB Flash Wireless – WiFi 6, Bluetooth LE 5, and […]

SparkFun launches MicroMod Single Pair Ethernet kit for easier 10BASE-T1L experimentation

SparkFun MicroMod Single Pair Ethernet Kit

The SparkFun MicroMod Single Pair Ethernet Kit utilizes the ADIN1110 transceiver for 10BASE-T1L communication, enabling long-distance connectivity over a single twisted pair cable. Things get easier as SparkFun has designed the module to be compatible with the MicroMod ecosystem, which allows for testing connections between industrial devices over long distances, up to 1,700 meters. The standout feature of this board is its ADIN1110 transceiver, which supports 10BASE-T1L Ethernet. This technology uses a single twisted pair for lightweight, long-distance data transmission, achieving speeds up to 10Mbps by the 802.3cg IEEE standard, all without delivering power over the cable. SparkFun MicroMod Single Pair Ethernet Kit Specification: 2x SparkFun MicroMod Single Pair Ethernet Function boards 10BASE-T1L IEEE Standard 802.3cg-2019 Compliant Transceiver Single-pair Ethernet transmission at speeds up to 10Mbps 1km transmission distance (1.7km max cable reach) Supply Voltage of 1.8V or 3.3V 2.4V transmission amplitude Integrated MAC connects via SPI – Supports 16 MAC addresses Supports both […]

Digi IX40 5G edge computing industrial IoT cellular gateway is designed for Industry 4.0 use cases

Digi IX40 5G industrial cellular IoT gateway

Digi IX40 is a 5G edge computing industrial IoT cellular router solution designed for Industry 4.0 use cases such as advanced robotics, predictive maintenance, asset monitoring, industrial automation, and smart manufacturing. The IIoT gateway is based on an NXP i.MX 8M Plus Arm processor running a custom Linux distribution, and besides 5G and 4G LTE cellular connectivity, offers gigabit Ethernet networking with 6 RJ45 and SFP ports, GNSS for geolocation and time, as well as digital and analog I/Os and an RS232/RS422/RS485 serial interface supporting Modbus. Digi IX40 specifications: SoC – NXP i.MX 8M Plus Arm Cortex-A53 processor @ 1.6 GHz with 2.3 TOPS NPU System Memory – 1GB RAM Storage – 8GB eMMC flash Wireless Cellular  IX40-05 5G NSA, 5G SA, 4G LTE-ADVANCED PRO CAT 19 5G NR bands – n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, […]

SMLIGHT launches Zigbee Ethernet/WiFi coordinators and USB adapters based on TI CC2652P7 or CC2674P10 wireless chips

SMLIGHT SLZB-06p7 SLZB-06p10 Zigbee Ethernet coordinator

SMLIGHT has recently released Zigbee Ethernet/WiFi/USB coordinators and USB dongles based on either Texas Instruments CC2652P7 or CC2674P10 wireless microcontrollers that update on the company’s SLZB-06 Zigbee 3.0 to PoE Ethernet, USB, and WiFi adapter and Silicon Labs EFR32MG21-based SLZB-07 Zigbee 3.0 USB adapter. That’s a total of four new devices with the SLZB-06p7 and SLZB-07p7 based on CC2652P7 and designed to work with vendor-agnostic software such as Zigbee2MQTT and Home Assistant ZHA, and the similar SLZB-06p10 and SLZB-06p10 based on the CC2674P10 whose Zigbee firmware is still under development according to SMLIGHT. SLZB-06p7/SLZB-06p10 Zigbee to Ethernet/WiFi/USB coordinator SLZB-06p7/SLZB-06p10 specifications: Wireless SoCs SLZB-06p7 – Texas Instruments CC2652P7 Arm Cortex-M4F microcontroller @ 48-MHz with 704KB flash, 256KB ROM for protocol and library functions, 8KB of SRAM, integrated +20 dB power amplifier, Bluetooth 5.2 Low Energy, Matter, Thread, Zigbee 3.0 SLZB-06p10 – Texas Instruments CC2674P10 Arm Cortex-M33 microcontroller @ 48 MHz with […]

Hubitat Elevation Model C-8 Pro Home Automation Hub supports Zigbee, Z-Wave, and Matter devices

Hubitat Elevation Model C-8 Pro gateway

Hubitat has recently launched the Elevation Model C-8 Pro Home Automation hub with a Z-Wave 800 radio, a Zigbee 3.0 radio, Wi-Fi, and Ethernet connectivity that upgrade on the earlier C-8 model with more memory (2GB RAM), and a faster 2.0 GHz Cortex-A55 processor. I’ve never written about Hubitat Smart Home solutions, but they seem to have an active community of users,  so I’ll check out their latest Elevation Model C-8 Pro gateway and what they have to offer in terms of software and device support. Hubitat Elevation Model C-8 Pro specifications: SoC – Arm Cortex A55 processor @ 2.016 GHz (that could be the Amlogic S905X3 found in the ODROID-C4 SBC) System Memory – 2GB RAM Storage – TBD Connectivity Ethernet RJ45 port WiFi Z-Wave 800 radio Zigbee 3.0 radio Matter support 2x external antennas Power Supply – 5V via USB-C port Dimensions – 8.2 x 7.5 x 1.7 […]

EXT-2.5GE-RK3588-RT is a quad 2.5GbE Ethernet expansion board for ROC-RK3588-RT SBC

Rockchip RK3588 SBC Seven Ethernet ports

In a recent article, we covered the ROC-RK3588-RT SBC, one of its main features was its three ethernet ports: one 2.5GbE and the other two standard ethernet ports. This setup made this board ideal for routers and firewalls. To enhance its capabilities, Firefly recently launched the EXT-2.5GE-RK3588-RT, a 2.5GbE Ethernet Expansion Board, which adds four more 2.5GbE ports to the ROC-RK3588-RT Rockchip RK3588 SBC. We’ve previously covered many SBCs, mini PCs, and motherboards from Firefly, such as their Rockchip RK3588 SBCs with 32GB RAM, the Firefly AIO-1684XQ motherboard, and the Firefly Station P3D mini PC. Feel free to check them out if you’re interested. While searching, I found limited documentation, but upon closer inspection, I discovered that the board uses the RTL8125BG IC for Ethernet control and the PI6C557-05 IC as a spectrum clock generator. There is also some kind of PMIC on the board recognizable by the big inductor, […]

Sipeed Longan Pi3H – A Raspberry Pi Zero-sized board with gigabit Ethernet, WiFi 6, HDMI, and USB ports

Lichee Longan Pi3H

Sipeed Longan Pi3H is a Raspberry Pi Zero-sized single board computer (SBC) powered by an Allwinner H618 quad-core Cortex-A53 processor and equipped with full-size connectors namely an HDMI 2.0 video output, two USB 2.0 Type-A ports, and a gigabit Ethernet RJ45 jack. It also offers WiFi 6 and Bluetooth 5.4 connectivity, features the usual 40-pin GPIO header found in Pi Zero boards and relies on a USB OTG Type-C port for power. Its design is unusual for a board of that size, not only because of the full-size ports, but also because it’s comprised of a carrier board and a replaceable LM3H CPU module with the Allwinner H618 SoC, RAM, and eMMC flash. Sipeed Longan Pi3H specifications: SoC – Allwinner H618 CPU – Quad-core Arm Cortex-A53 processor @ up to 1.5GHz with 1MB L2 cache GPU – Arm Mali-G31 MP2 GPU with support for OpenGL ES 1.0/2.0/3.2, OpenCL 2.0, Vulkan […]

$44 5G M.2 to Ethernet and USB “converter” takes M.2 5G PCIe modules

5G M.2 to Ethernet and USB converter

Waveshare “5G M.2 to Gigabit Ethernet converter, 5G M.2 to USB3 converter” is a single device designed to easily and cheaply add 5G connectivity to a LAN through a gigabit Ethernet port or to a specific host like a PC or a Raspberry Pi SBC through a USB 3.1 Type-C port. The 5G M.2 to Ethernet and USB converter is flexible as by default it does not ship with a 5G module, but features an M.2 Key-B socket for 5G 3042 or 3052 modules allowing it to meet the requirements of a specific location. 5G M.2 to Ethernet and USB converter key features and specifications: Cellular M.2 Key B socket for 3042/3052 5G modules from SIMCom (SIM82XX), Quectel (RM5XX), and Fibocom (FM160XX) Onboard standard SIM card slot 4x 5G omnidirectional high-gain antennas Ethernet – Gigabit Ethernet RJ45 port using RealTek RTL8125 controller USB – USB 3.1 Type-C port for connection […]

Exit mobile version
UP 7000 x86 SBC