gl.inet

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on GL.iNet Puli AX (GL-XE3000) WiFi 6 & 5G router integrates a 6,400 mAh battery

GL.iNet Puli AX (GL-XE3000) WiFi 6 & 5G router integrates a 6,400 mAh battery

Puli AX GL XE3000

GL.iNet Puli AX (also known as GL-XE3000) is a WiFi 6 and 5G cellular router with an integrated 6,400 mAh battery and running a fork of OpenWrt 21.02 on a MediaTek Filogic 820 dual-core Arm Cortex-A53 router SoC. If the design looks familiar it’s because it’s based on the same platform as the GL.iNet Spitz AX 2.5GbE, WiFi 6 and 5G cellular router that we reviewed last May, except the new Puli AX model comes with a 6,400 mAh which makes it even more convenient as a travel router. Puli AX (GL-XE3000) specifications: SoC – MediaTek MT7981A (Filogic 820) dual-core Arm Cortex-A53 processor @ 1.3 GHz System Memory – 512 MB DDR4 Storage – 8GB eMMC flash, MicroSD card slot Networking 1x 2.5GbE WAN Ethernet port 1x Gigabit Ethernet LAN port Dual-band IEEE 802.11a/b/g/n/ac/ax WiFi 6 up to 574Mbps (2.4GHz), 2,402Mbps (5GHz) RM520N-GL 5G cellular modem and 2x Nano SIM […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Linux 6.4 release – Main changes, Arm, RISC-V and MIPS architectures

Linux 6.4 release – Main changes, Arm, RISC-V and MIPS architectures

Linux 6.4 release

Linux 6.4 has just been released by Linus Torvalds on the Linux Kernel Mailing List (LKML): Hmm. Final week of 6.4 is done, and we’ve mainly got some netfilter fixes, some mm reverts, and a few tracing updates. There’s random small changes elsewhere: the usual architecture noise, a number of selftest updates, some filesystem fixes (btrfs, ksmb), etc. Most of the stuff in my mailbox the last week has been about upcoming things for 6.5, and I already have 15 pull requests pending. I appreciate all you proactive people. But that’s for tomorrow. Today we’re all busy build-testing the newest kernel release, and checking that it’s all good. Right? Released around two months ago, Linux 6.3 brought us AMD’s “automatic IBRS” Spectre defense mechanism, additional progress on the Rust front with User-mode Linux support (on x86-64 systems only), the NFS filesystem (both the client and server sides) gained support for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on GL.iNet Spitz AX review – Part 2: a router with 5G NR, WiFi 6, 2.5GbE, failover and load balancing

GL.iNet Spitz AX review – Part 2: a router with 5G NR, WiFi 6, 2.5GbE, failover and load balancing

Gl.iNet Spitz AX review 5G failover testing

Earlier this month I introduced the GL.iNet Spitz AX (aka GL-X3000NR) router with 2.5GbE, WiFi 6, and 5G NR cellular connectivity listing the specifications, doing an unboxing, and going through the initial setup. I’ve now received a new SIM card for testing and installed it into the router to continue the review. 4G/5G cellular connectivity on Spitz AX router After powering the router, the SIM card was detected and showed a 5G connection, but quickly fell back to 4G as can be seen with the cyan icon in the screenshot below. Shortly after, I lost 4G data connectivity, and after a while, the modem was not detected at all. But after restarting the router, and clicking on the “Auto Setup” icon everything looked to be working fine and I was always on a 5G connection from “house 1”. You’ll notice an envelop icon on the top right corner of the […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on GL.iNet Spitz AX (GL-X3000NR) 5G NR WiFi 6 router review – Part 1: Specs, unboxing, and first boot

GL.iNet Spitz AX (GL-X3000NR) 5G NR WiFi 6 router review – Part 1: Specs, unboxing, and first boot

GL-X3000NR 5G NR WiFi 6 router review

GL.iNet Spitz AX, also known as GL-X3000NR, is a compact 5G NR WiFi 6 router running OpenWrt 21.02 on a MediaTek Filogic 820 (TM7981A) dual-core Cortex-A53 processor coupled with 512MB DDR4 and 8GB eMMC flash, as well 2.5GbE and GbE interfaces, and a USB 2.0 port. The company sent us a Spitz AX router for evaluation, and in the first part of the review, we’ll go through the specifications, and do an unboxing and a teardown, before connecting it for a first boot. GL.iNet Spitz AX router specifications SoC – MediaTek MT7981A (Filogic 820) dual-core Arm Cortex-A53 processor @ 1.3 GHz System Memory – 512 MB DDR4 Storage – 8GB eMMC flash, MicroSD card slot up 1+ TB Networking 1x 2.5GbE WAN Ethernet port 1x Gigabit Ethernet LAN port Dual-band IEEE 802.11a/b/g/n/ac/ax WiFi 6 up to 574Mbps (2.4GHz), 2402Mbps (5GHz) RM520N-GL 5G cellular modem and 2x Nano SIM card slots […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on A first look at GL.iNet GL-S200 Thread Border Router kit with three nRF52840 Thread boards

A first look at GL.iNet GL-S200 Thread Border Router kit with three nRF52840 Thread boards

GL-S200 Thread Border Router review with Thread Dev Boards

GL.iNet are better known for their routers, but the company is also offering IoT gateways and Smart Home hubs such as the GL-S10 BLE to MQTT IoT gateway. The company is now preparing to launch the GL.iNet GL-S200 Thread Border Router in early April, and I’ve been asked to do some beta testing before launch, so GL.iNet have sent me a kit with the GL-S200 and three Thread development boards acting as IoT nodes. A Thread Border Router acts as a WiFi or/and Ethernet gateway connecting to battery-powered Thread sensor nodes equipped with a low-power 802.15.4 radio. In this first post, I’ll go through the hardware and specifications, before reporting my finding in a separate post next week. GL-200 Thread Border Router kit unboxing and specifications The development boards are all identical and they were each kept in an antistatic bag. But let’s open the GL-S200 package first. The Thread […]

ASUS Tinker board 3N