Allwinner H700 is a “new” processor that has found its way into Transpeed P10 Full HD “portable” projector running Android 10. It is sold on Aliexpress for $125 including shipping. Allwinner H700 happens to be yet another derivative of Allwinner H616/H618 quad-core Corex-A53 processor, but adds an RGB LCD interface up to 1080p60 and video input interfaces that make it suitable for projector and smart displays. The processor also has two Ethernet interfaces (1x Gigabit and 1x 10/100M) like the H616, but no built-in PHY, so an additional Ethernet transceiver is needed on the board. Let’s first have a look a the Transpeed P10 projector specifications: SoC – Allwinner H700 quad-core Arm Cortex-A53 processor @ 1.5GHz with Arm Mali-G31 mp2, 6K video decoder, and 4Kp25 H.264 video encoder System Memory – 2GB RAM Storage – 16GB eMMC flash Projector 1920×1080 native resolution LED bulb Brightness – 120 ANSI Lumens Projection […]
We’ve very recently written about Geniatech XPI-3566 SBC powered by Rockchip RK3566 CPU that somewhat follows the Raspberry Pi 3 Model B form factor. Boardcon Compact3566 offers similar features, but it appears to keep exactly the same port assignment as the Raspberry Pi SBC, so it should be compatible with more accessories. The Compact3566 SBC ships with up to 8GB LPDDR4 and 128GB eMMC flash, features Gigabit Ethernet & WiFi 5, four USB 3.0/2.0 ports, HDMI 2.0 output, MIPI DSI and CSI interfaces, the 40-pin GPIO header, as well as extra built-in features such as an M.2 socket for storage, RTC with battery, and a built-in microphone. Compact3566 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 @ up to 1.8 GHz with ARM Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2. OpenCL 2.0. Vulkan 1.1, 0.8 TOPS NPU System Memory – 2GB, 4GB, or 8GB LPDDR4/LPDDR4X Storage 8GB, 16GB, […]
I’ve recently received an early sample of Radxa ROCK5 Model B (aka ROCK 5B) SBC part of the “Developer Edition” batch with 16GB RAM, and already showed the hardware and it booting successfully in Debian 11.
I’ve now spent more time with the board, and as part of the “debug party” tested performance and features in Debian 11. As one would expect, some things work fine, providing excellent performance, but others still need improvements.
ProScreenCast SC01 is a 4K wireless display adapter supporting 3840×2160 resolution at up to 60 Hz with High-Dynamic Range (HDR) support. The HDMI 2.0 adapter is compatible with Miracast, Airplay, and DLNA streaming standards, and can sustain the required bandwidth needed thanks to dual-band WiFi 5 connectivity. We started to see plenty of Miracast and DLNA capable wireless adapters about 8 years ago, but there were all limited to WiFi 4 and either 720p or 1080p resolutions, so the ProScreenCast SC01 wireless adapter offers a greatly improved video quality and user experience with faster WiFi, and 4K HDR support. SC01 specifications: Video Output – HDMI 2.0 up to 4Kp60 with HDR support Wireless – Dual-band WiFi 5 (802.11ac) Support standards – Airplay, Miracast, and DLNA Power Supply – 5V/1A or 2A via USB Type-C port Dimensions – 72 x 72 x 17 mm Weight – 50.7 grams Materials – ABS+PC […]
NVISEN FU01 fanless mini PC is offered with a choice of Intel Core i3/i5/i7 Tiger Lake processors, fitted with up to 16GB RAM (upgradeable to 64GB), a 256GB or 512GB M.2 NVMe SSD, and the highlight of the computer is its 40Gbps Thunderbolt 4 port with 8K video output support. The Tiger Lake system can drive up to three 4K displays with HDMI 2.0 and DisplayPort connectors adding to the Thunderbolt 4 port, offers Gigabit Ethernet and WiFi 5 connectivity, plus six USB 3.0/2.0 Type-A ports for expansion. NVISEN FU01 specifications: SoC (one or the other) Intel Core i3-1115G4 dual-core processor @ 3.0GHz, up to 4.1GHz (Turbo) with Intel UHD graphics; 28W TDP Intel Core i5-1135G7 quad-core processor @ 2.4GHz, up to 4.2GHz (Turbo) with Intel Xe graphics; 28W TDP Intel Core i7-1165G7 quad-core processor @ 2.8GHz, up to 4.7GHz (Turbo) with Intel Xe graphics; 28W TDP System Memory & […]
M5Stack ATOM Display Lite is a kit based on GOWIN Gowin GW1NR-9C FPGA and LT8618SX RGB to HDMI chip designed to add HDMI output up to 720p to the company’s ESP32-based M5Stack ATOM Lite module. The ATOM Lite sees the ATOM Display Lite kit as an SPI display, but the solution outputs the data to an HDMI monitor or TV with up to 1280×720 resolution and can be used for information display, menu board, and more. ATOM Display Lite specifications: Wireless IoT modules – M5Stack ATOM Lite ESP32-PICO-D4 based module with 240MHz dual-core CPU, 520KB SRAM, 4MB flash, Wi-Fi 4 and Bluetooth connectivity FPGA – Gowin GW1NR-9C (PDF datasheet) FPGA with 8,640 LUTs used to simulate SPI TFT-LCD data output, HDMI bridge – Lontium Semi LT8618SX RGB to HDMI chip with 24-bit color depth up to 1280×720 output @ 60 fps (optimized frame rate up to 12 ~ 16FPS) Misc- […]
A couple of months ago I received “RPI All-in-One”, a 10.1-inch touchscreen display for Raspberry Pi boards, listed the specifications, checked out the package content, installed a Raspberry Pi 4 inside the display before booting my new all-in-one (AiO) PC successfully. I’ve now had time to spend more time with the PC/display and see how it performs under various conditions. I also tested HDMI and USB-C input features with a laptop and mini PC. Fan or fanless operation? After updating Raspberry Pi OS, I ran sbc-bench.sh script together with rpi-monitor to see how the Raspberry Pi 4 with 1GB RAM would perform under load with the (noisy) fan enabled.
Installing needed tools. This may take some time. Done.
Checking cpufreq OPP. Done (results will be available in 11-15 minutes).
Executing tinymembench. Done.
Executing OpenSSL benchmark. Done.
Executing 7-zip benchmark. Done.
Checking cpufreq OPP. Done (17 minutes elapsed).
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_ADDRESS = "en_GB.UTF-8",
LC_NAME = "en_GB.UTF-8",
LC_MONETARY = "en_GB.UTF-8",
LC_PAPER = "en_GB.UTF-8",
LC_IDENTIFICATION = "en_GB.UTF-8",
LC_TELEPHONE = "en_GB.UTF-8",
LC_MEASUREMENT = "en_GB.UTF-8",
LC_TIME = "en_GB.UTF-8",
LC_NUMERIC = "en_GB.UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
It seems neither throttling nor frequency capping has occured.
memcpy: 2595.9 MB/s (0.8%)
memset: 3398.3 MB/s (2.7%)
7-zip total scores (3 consecutive runs): 5556,5650,5565
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
aes-128-cbc 61981.49k 76335.40k 82773.25k 84199.42k 84355.75k 84393.98k
aes-128-cbc 62224.25k 76254.36k 82779.39k 84461.91k 84757.16k 84825.43k
aes-192-cbc 55900.34k 67052.89k 71500.80k 73121.11k 73362.09k 73203.71k
aes-192-cbc 55869.41k 66963.52k 71835.14k 72934.74k 73471.32k 73465.86k
aes-256-cbc 50541.63k 59834.26k 63387.14k 64413.70k 64634.88k 64760.49k
aes-256-cbc 50646.47k 59735.02k 63384.92k 64461.14k 64648.53k 64629.42k
Full results uploaded to http://ix.io/3MfY.
In case this device is not already represented in official sbc-bench results list then please
consider submitting it at https://github.com/ThomasKaiser/sbc-bench/issues with this line:
| RPi 4 Model B Rev 1.1 / BCM2711 rev B0 | 1500 MHz | 5.10 | Bullseye armhf | 5590 | 62100 | 64690 | 2600 | 3400 | - | [http://ix.io/3MfY](http://ix.io/3MfY) |
No throttling was detected, and the temperature never exceeded 56°C in a room with an ambient temperature of 26°C. I then disconnect the fan, but it turns out the fan can also be easily disabled in the OSD menu […]
Tang Nano 9K FPGA is the third board from Sipeed based on GOWIN FPGA following the original Tang Nano board with 1K LUT and Tang Nano 4K launched last year with GW1NSR-LV4C (aka GW1NSR-4C) FPGA offering 4068 logical units and 64 Mbit PSRAM, plus an Arm Cortex-M3 hard processor. As its name implies, the new board comes with 9K LUTs, as well as 64 Mbit PSRAM, 32 Mbit Flash, a micro SD card, and video I/O (HDMI, RGB LCD connector) that makes it suitable to run Verilog HDL code emulating a PicoRV32 RISC-V soft-core with all peripherals. Tang Nano 9K FPGA board specifications: FPGA – GOWIN LittleBee GW1NR-9/GW1NR-LV9 8,640 logical units (LUTs) 6,480 flip-flop 17,280 bits shadow SRAM (SSRAM) 486 Kbit block SRAM (BSRAM) 64 Mbit PSRAM 608 Kbit user flash 2x PLL Up to 276x user I/O Storage – 32 Mbit SPI flash. MicroSD card socket Display I/F HDMI […]