IoT

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on The European Version of Orvibo Wiwo S20 Smart Socket Has Been Found to Pose a “Serious Risk”

The European Version of Orvibo Wiwo S20 Smart Socket Has Been Found to Pose a “Serious Risk”

Orvibo Wiwo S20 is a WiFi smart socket that can be controlled by a smartphone and some people are using it with OpenHAB open source automation software. The socket has four versions with with US, UK, EU or AU plug types, and some of my clever readers mentioned that the European plug was mot likely NOT compliant with European regulations, was likely dangerous, and should be limited to 2.5A instead of 10A. It turns out they were right, as the European commission issued a safety notice last declaring Orvibo Wiwo S20 to be dangerous with risk of electric shock. The document further explains: The shape of the socket is not correct: when a plug is inserted the live pins of the plug are accessible. Appliances which should be earthed can be connected to the socket but the socket itself is not earthed. The product does not comply with the requirements […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 14 Comments on LimeSDR Open Source Hardware Software Defined Radio Goes for $199 and Up (Crowdfunding)

LimeSDR Open Source Hardware Software Defined Radio Goes for $199 and Up (Crowdfunding)

Canonical and Lime Micro showcased SoDeRa software defined radio (SDR) a couple of months ago, with a promise to launch a crowdfunding campaign later this year. They’ve fulfill their promise, and launched the open source SDR, renamed to LimeSDR, on Crowdsupply. LimeSDR board specifications: FPGA – Altera Cyclone IV EP4CE40F23 Altera FPGA compatible with EP4CE30F23 System Memory – 256 MB DDR2 SDRAM RF Lime Microsystems LMS7002M RF transceiver with continuous coverage of the frequency range between 100 kHz and 3.8 GHz; 61.44 MHz bandwidth 4 x TxOut and 6 x RxIn U.FL connectors Power Output (CW): up to 10 dBm Wi-Fi, GSM, UMTS, LTE, LoRa, Bluetooth, Zigbee, RFID, Digital Broadcasting, configurable through apps. USB – 1x micro USB3 via CYUSB3014-BZXC Cypress Microcontroller  for control, data transfer and power Misc – Status LEDs, RGB LEDs, 4x switches Power – USB or external power supply Dimensions –  100 mm x 60 mm The board […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Tibbo Project System is a Modular Linux IoT Prototyping Platform based on TI Sitara Cortex A8 Processor

Tibbo Project System is a Modular Linux IoT Prototyping Platform based on TI Sitara Cortex A8 Processor

If you’ve found yourself needing to quickly demo a system that does not look like a mess of wire to a customer, or your project is requires low production volumes, making the cost of designing your own and mass-producing the hardware prohibitive, Tibbo Project System might be worth looking into. It features an almost bare board powered by Texas Instruments Sitara processor, and a large area for Tibbit blocks to add features as needed, as well as an enclosure. Size 3 Linux Project PCB (LTPP3) specifications: SoC – Texas Instruments Sitara AM335x Cortex A8 processor up to 1.0 GHz System Memory – 512 MB DDR3 Storage – 512 MB NAND flash, 2KB EEPROM, optional micro SD slot Connectivity – 10/100M Ethernet (RJ45), optional WiFi (via LW1000 module) and GPRS connectivity (via Tibbit #47) Expansion – 51 I/Os: 7x tiles 14x sockets for Tibbit module including 4x with UART capability up […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Alps Electric Smart Mouse Would Let Your Employer Monitor Your Stress Level

Alps Electric Smart Mouse Would Let Your Employer Monitor Your Stress Level

Work and life in general can be very stressful, and a Japanese company called Alps Electric wants to enable employers to monitor their staff mental stress level using a mouse that includes a “near-infrared spectroscopic sensor” reporting hemoglobin level, oxygen saturation and pulse, as well as an environmental sensor for temperature, humidity, etc… data. There’s no special way to use the mouse, and the end-user would just control the mouse normally. with all data apparently sent to a centralized system. The mouse  was demonstrated at Medtec Japan 2016, on April 20 to 22 in Tokyo. The sensor development is scheduled to end by Q1 2017, with samples shipping in the spring of 2017. There will certainly be ethical questions raised: Is that a welcome addition to the workplace to help employer better take care of their health, or a step too far and an invasion of privacy? Via Nikkei Technology […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on $20 MediaTek LinkIt 7687 Arduino Compatible WiFi IoT Board Runs FreeRTOS

$20 MediaTek LinkIt 7687 Arduino Compatible WiFi IoT Board Runs FreeRTOS

MediaTek Labs has already launched several WiFi boards for IoT applications starting with LinkIt ONE, and later LinkIt Smart 7688 running OpenWrt, and the company is now about to launch LinkIt 7687 HDK (Hardware Development Kit) powered by Mediatek MT7687F Cortex-M4 SoC,  running FreeRTOS, and developed & produced by Silicon Application Corp (SAC). LinkIt 7687 (WS3489) board specifications: SoC – MediaTek MT7687F ARM Cortex-M4F MCU @ 192MHz with 352 KB SRAM, 64KB ROM, and 2 MB serial flash in package, integrated security engine, and built-in 802.11n WiFi. 8×8 mm 68-pin QFN package Connectivity – 1×1 802.11 b/g/n WiFi with on-module PCB antenna and U.FL connector. USB – 1x micro USB for power, debugging (Coresight Debug Access Port + Virtual COM) Expansion Arduino Uno Rev. 3 headers + an extra 8-pin extension connector. Mass Storage Device (MSD) flash programming interface. Reserved headers for power consumption (current) measurement. Misc – LEDs for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Ubuntu 16.04 LTS “Xenial Xerus” Release

Ubuntu 16.04 LTS “Xenial Xerus” Release

Ubuntu 16.04 Long Term Support (LTS) release of the popular Linux distribution is scheduled for later today. The release codenamed Xenial Xerus will feature ‘snap’ package format, LXD pure-container hypervisor, and be the very first release with support for converge with IoT, phone, desktop and server versions running on the same base. Some of the key changes listed by Canonical include: Introduces “snaps” for new robust, secure app format which can still be used along ‘deb’ packages Introduces LXD pure-container hypervisor with OpenStack Mitaka Supports IBM Z and LinuxONE systems with flat pricing Steps towards converged Ubuntu across IoT, Phone, Desktop and Server Introduces ZFS and CephFS for large-scale cloud storage Ubuntu 16.04 will also run updated version of packages with Linux 4.4, Python 3.5, OpenSSH 2.0, PHP 7.0, MySQL 5.7, etc.. More details about the changes can be found on Xenial Xerus release notes. I’ve also noticed the system […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Mini Review of NextDrive Plug for Private Cloud Storage and Home Security

Mini Review of NextDrive Plug for Private Cloud Storage and Home Security

NextDrive Plug is an ARM based plug computer that’s used to store your photos or music, and/or as a security system using a webcam combined with Pixi motion sensor. They had a successful crowdfunding campaign, and now that they’ve sent rewards to backers, I’ve also received NextDrive Plug and Pixi for evaluation. The courier was not particularly gentle with the packages, but the devices themselves were not damaged. NextDrive Plus package included the box, a US plug, and a user’s manual in English. Pixi comes with two 3M stickers, and a user’s manual. There’s also a plastic film to avoid depleting the battery, that you’ll need to remove before using the sensor. The interfaces on the plug are minimal with a USB port for a USB mass storage device (HDD, flash drive…) and/or a UVC webcam, and the socket for the power plug adapter on the back.You can then plug […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on LoRaONE is a Small LoRa IoT Development Board Based on Atmel SAMD21 MCU, Microchip LoRaWAN Module (Crowdfunding)

LoRaONE is a Small LoRa IoT Development Board Based on Atmel SAMD21 MCU, Microchip LoRaWAN Module (Crowdfunding)

While there are many long range LPWAN standards, LoRa appears to be one of the most popular with boards such as LoPy, and now SODAQ LoRaONE module hitting crowdfunding campaigns. LoRaONE is powered by an Atmel Cortex M0+ micro-controller, features Microchip RN2483 or RN2903 LoRaWAN module, GPS, and various sensors. LoRaONE board specifications: MCU- Atmel ATSAMD21G18 ARM Cortex M0+ micro-controller @ 48 MHz with 256 KB flash memory, 32KB SRAM, and up to 16 KB EEPROM (by emulation) Connectivity LoRa via Microchip  RN2483 (433/868 MHz) or RN2903 (915 MHz) module depending on your region GPS via u-blox EVA 7M USB – 1x micro USB port for power and programming Expansion headers (unpopulated) 14x digital pin, 12x for analog and 8x for PWM, plus UART, SPI and TWI (I2C) Analog output pin – 10-bit DAC External Interrupts: Available on all pins DC Current per I/O pin: 7 mA Operating Voltage – […]

Exit mobile version