jetway

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Intel Arrow Lake-S ATX motherboard supports up to 256GB CU-DIMM DDR5 RAM, features W880 chipset

Intel Arrow Lake-S ATX motherboard supports up to 256GB CU-DIMM DDR5 RAM, features W880 chipset

Jetway ATX-ARS1-W880 ATX motherboard

Jetway ATX-ARS1-W880 is an ATX motherboard taking socketed Intel Arrow Lake-S SoCs with up to 24 cores, 36 TOPS of AI performance, and featuring four CU-DIMM (Clocked Unbuffered DIMM) sockets for up to 256GB DDR5 ECC memory, and a W880 chipset. Targeting Smart Factory applications, the industrial-grade motherboard also features four SATA III ports and two M.2 M-Key PCIe Gen5/4 sockets for storage, seven PCIe slots, three 2.5GbE ports, M.2 E-Key and B-Key sockets for WiFi, Bluetooth, and cellular (4G/5G) connectivity, sixteen USB interfaces (Type-A and headers), and a few serial interfaces. The ATX-ARS1-W880 also supports up to four independent displays through DP, HDMI, and VGA ports, and features a combo audio block with Line-in, Line-out, and MIC-out jacks. Jetway ATX-ARS1-W880 specifications: SoC – Intel LGA1851 socket for Intel Core Ultra 200S “Arrow Lake-S” processor up to 125W TDP Chipset – Intel W880 “workstation” chipset System Memory – 4x DDR5 […]

Posted on by Debashis Das - No Comments on Jetway P150CDN1 – A 15-inch Alder Lake-N fanless industrial panel PC with 8 USB ports for kiosk and HMI 

Jetway P150CDN1 – A 15-inch Alder Lake-N fanless industrial panel PC with 8 USB ports for kiosk and HMI 

P150CDN1 Alder Lake N Fanless Touch Panel Computer

The Jetway P150CDN1 is a 15-inch fanless industrial touch panel PC built around the Intel N97 (Alder Lake-N) quad-core processor and designed for HMI, kiosks, factory automation, retail, healthcare, and other space-constrained or hygiene-sensitive environments. The industrial touch panel PC features a 10-point capacitive touchscreen, HDMI 2.0 and DP 1.2 video outputs, DDR5 memory, M.2 and SATA storage, audio, dual Gigabit Ethernet, eight USB 3.2 and USB 2.0 ports, as well as RS-232/485 DB9 serial ports. The device has an operating temperature range of –10°C to 60°C, and the enclosure supports wall, panel, and VESA mounting for industrial and commercial touchscreen deployments. Jetway P150CDN1 specifications: SoC – Intel Processor N97 CPU – Quad-core Alder Lake N-series processor up to 3.6 GHz with 6MB cache GPU – 24EU Intel UHD Graphics Gen 12 @ 1.2 GHz TDP: 12W System Memory – Up to 32GB DDR5-4800 SO-DIMM memory via a single SO-DIMM (Note: […]

Posted on by Debashis Das - No Comments on Jetway B903DMTX Intel N97 fanless industrial box PC features 10 USB ports, four DB9 serial interfaces

Jetway B903DMTX Intel N97 fanless industrial box PC features 10 USB ports, four DB9 serial interfaces

Jetway B903DMTX Intel N97 Box PC

Jetway B903DMTX is a fanless industrial box PC built around the Intel N97 quad-core Alder Lake-N CPU and designed for industrial applications with up to ten USB Type-A ports, four DB9 serial ports, dual GbE, and support for M.2 wireless modules. It supports up to 32GB of DDR5-4800 SO-DIMM memory, SATA III and M.2 SSD storage, along with WiFi and Bluetooth through an M.2 E-Key slot. The system also features 4Kp60-capable HDMI and DisplayPort video outputs. The embedded box PC runs on a 12–19V DC input, supports AT/ATX power modes, and includes features such as a watchdog timer, Intel PTT (fTPM), and a wide -10°C to 60°C operating temperature. These features make it suitable for factory automation, kiosks, digital signage, industrial gateways, and edge computing systems. Jetway B903DMTX specifications: SoC – Intel Processor N97 quad-core Alder Lake N-series processor up to 3.6 GHz with 6MB cache, 24EU Intel UHD Graphics Gen 12 @ 1.2 […]

Posted on by Debashis Das - 3 Comments on Intel N97 mini-ITX motherboard targets industrial automation, digital signage, networking appliances

Intel N97 mini-ITX motherboard targets industrial automation, digital signage, networking appliances

Jetway DMTX ADN1 Alder Lake N Mini ITX Motherboard

The Jetway DMTX-ADN1 is a mini-ITX industrial motherboard built around the Intel N97 Alder Lake-N SoC with support for DDR5 memory, multiple displays, and a wide temperature range. It targets applications in industrial automation, kiosks, digital signage, and networking appliances. The motherboard supports up to 32GB DDR5 4800MHz memory, triple display setups via HDMI 2.0b, DP 1.4, and a 24-bit dual-channel LVDS/eDP interface, and offers a SATA III port and two M.2 M-Key sockets for NVMe or SATA drives. It also features an M.2 E-Key 2230 socket for wireless expansion with CNVi support, two Gigabit Ethernet ports, and a range of I/Os, including six COM ports, two USB 3.2, eight USB 2.0, 8-bit GPIO, SMBus, watchdog timer, and more. Jetway DMTX-ADN1 Specifications: SoC –  Intel Processor N97 quad-core Alder Lake N-series processor up to 3.4 GHz with Intel UHD graphics; 12W TDP System Memory –  DDR5 4800MHz via single Channel SO-DIMM, up to 32GB (up […]

Posted on by Debashis Das - No Comments on Thin mini-ITX industrial motherboard features Intel Core Ultra 5 225H or Ultra 7 255H Arrow Lake-H SoC

Thin mini-ITX industrial motherboard features Intel Core Ultra 5 225H or Ultra 7 255H Arrow Lake-H SoC

Jetway MTX ARH1 Thin Mini ITX Industrial SBC

Jetway MTX-ARH1 is a thin Mini-ITX industrial motherboard powered by either an Intel Core Ultra 5 225H or Ultra 7 225H “Arrow Lake-H” SoC, and is a direct upgrade over the Meteor Lake-H-based MTX-MTH1. The new board also features faster 6400MHz DDR5 memory and conditional 8K display support. Other features mostly stay the same: up to 96GB DDR5 memory, quad display output, triple 2.5GbE networking via Intel I226 controllers, dual M.2 M-Key sockets, an M.2 B-Key with nano-SIM for 4G/5G, an M.2 E-Key with CNVi for WiFi/Bluetooth, plus a PCIe Gen5 x8 slot and SATA with RAID 0/1. There’s also support for watchdog timer, optional TPM 2.0, Realtek audio, USB 3.2 Gen2 and USB 2.0 (with headers), multiple COM ports, GPIO, I²C, and SMBus. These features make this board suitable for industrial PCs, edge AI, AIoT gateways, and multi-display systems. Jetway MTX-ARH1 specifications: Arrow Lake SoC (one or the other) […]

Posted on by Debashis Das - 1 Comment on Jetway MTX-TWL1 – An Industrial-grade, fanless Intel Processor N250 or N150 Mini-ITX motherboard

Jetway MTX-TWL1 – An Industrial-grade, fanless Intel Processor N250 or N150 Mini-ITX motherboard

Jetway MTX TWL1 industrial, fanless Mini ITX motherboard

Jetway’s MTX-TWL1 is a fanless industrial Mini-ITX motherboard built around the Intel Processor N250 or N150 Twin Lake processor designed for embedded and IoT applications. It supports up to 32GB DDR5 memory, triple 4K display, dual 2.5GbE, SATA, and M.2 slots for NVMe, wireless, or 4G LTE/5G cellular connectivity. Additionally, it features six COM ports, USB 3.2, Type-C with DP Alt Mode, GPIOs, and a wide power and temperature range, making it suitable for In one of our last posts, we wrote about the Jetway JMTX-ADN8, which shares the same Mini-ITX form factor but is powered by Alder Lake-N processors instead. The boards have quite a different layout, but they both use DDR5 SO-DIMM memory, M.2 slots, SATA port, and a wide operating temperature range from -20°C to 60°C for industrial applications. Jetway MTX-TWL1 specifications: Twin Lake SoC (one or the other) Intel Processor N150 quad-core processor @ up to 3.6 […]

Posted on by Debashis Das - No Comments on Jetway PIC-ASL1 – A low-power Intel Atom x7213RE/x7433RE fanless industrial Pico-ITX SBC

Jetway PIC-ASL1 – A low-power Intel Atom x7213RE/x7433RE fanless industrial Pico-ITX SBC

Jetway PIC ASL1 Pico ITX Motherboard

Jetway PIC-ASL1 is a low-power, fanless Pico-ITX SBC built around the Intel Atom x7213RE or x7433RE Amston Lake SoC for industrial use. This SBC is very similar to the Alder Lake-N-based JPIC-ADN1, which Jetway released just last year. While both boards support up to 32GB DDR5 memory and dual displays via HDMI 2.0b and LVDS/eDP, the PIC-ASL1 adds industrial-grade resilience with shock/vibration resistance, a Nano SIM slot for cellular connectivity, and an Intel PTT for security. It also features a similar I/O layout, including dual USB 3.2 Gen 2, four USB 2.0, serial headers, two M.2 expansion slots, and a SATA III port for storage. Additionally, the PIC-ASL1 complies with various industrial standards, making it more suitable for use in harsh industrial environments compared to the ADN1. Jetway PIC-ASL1 specifications: Amston Lake SoC (one or the other) Intel Atom x7213RE dual-core processor @ 2.0 to 3.4 GHz with 6MB cache, […]

Posted on by Debashis Das - 4 Comments on Jetway B420PADN1 – A compact, fanless embedded box PC with Intel N97/N200 SoC, M.2 sockets, COM ports

Jetway B420PADN1 – A compact, fanless embedded box PC with Intel N97/N200 SoC, M.2 sockets, COM ports

B420PADN1 Fanless Compact Box PC with Intel N series SoC Processors

The Jetway B420PADN1 is a compact, fanless box PC built around an Intel N97 or N200 Alder Lake-N SoCs. The computer system features a Pico-ITX motherboard and operates in a wide -20°C to 50°C temperature range for industrial, commercial, and embedded applications where reliable and silent operation are important. The PC comes pre-installed with 8GB DDR5 4800MHz SO-DIMM memory (expandable up to 32GB) and supports 4K display output via an HDMI 2.0b port. For storage and expansion, it offers M.2 B+M Key and E-Key slots, along with a Nano SIM slot for cellular connectivity. Other features include two serial ports, USB 3.2 Gen1 and USB 2.0 ports, Gigabit Ethernet, and VESA/wall mounting options. These features make this embedded box PC suitable for applications such as digital signage, industrial automation, edge computing, IoT gateways, kiosks, and smart retail. Jetway B420PADN1 box PC specifications: Alder Lake-N SoC (one or the other) Intel […]

Exit mobile version