kickstarter

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on The Egg is a Tizen Based Portable Touchscreen Cloud Server (Crowdfunding)

The Egg is a Tizen Based Portable Touchscreen Cloud Server (Crowdfunding)

If you like the convenience of cloud storage, but are wary of privacy implications, and/or are not satisfied by the file download/upload transfer rate, a new device called The Egg might be what you are looking for. It’s a tiny Wi-Fi enabled cloud storage server, powered by an Intel Atom processor and running Tizen, with up to 256 GB storage that you can carry in your pocket, with your data being fully private and always accessible, and there’s also a touchscreen display to let you watch and share your media files. Egg technical specifications: SoC – Intel Atom Processor @ 2.0 GHz System Memory – 1GB RAM Storage –  64, 128, or 256GB eMMC Connectivity – Wi-Fi a/b/g/n (client / access point), Bluetooth 4.0 USB – Micro USB 2.0 type-AB for charging and file transfer from phone, camera, computer… Display –  2.4” Multi-Touch capacitive touch TFT, 240×320 resolution, 262K colors […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on $25 TinyScreen is an OLED Display for TinyDuino Arduino Compatible Board (Crowdfunding)

$25 TinyScreen is an OLED Display for TinyDuino Arduino Compatible Board (Crowdfunding)

Back in 2012, Tiny Circuits launched a Kickstarter campaign for TinyDuino, an Arduino compatible board that’s… tiny, based on Atmel Atmega328P, and supports tiny stackable shields in a similar fashion to Microduino (launched in 2013). The campaign was successful, and the company is now back on Kickstarter with TinyScreen, an OLED display that can be stacked on top of TinyDuino to create a smartwatch, a minuscule gamepad, smart glasses, and more. TinyScreen technical specifications: 96×64 OLED display, 16-bit color depth 0.96″ (24.4mm) viewable area Software controllable backlight (OLED brightness) Power down mode Four push buttons along the sides (connected to IO pins) SPI interface for display Power Supply – 3.0V to 5.5V operation (higher voltages supported with TinyShield power regulator) Power Consumption – 20 – 45mA max supply current (depending on brightness) Dimensions – 25.8mm x 25.0mm Programming of TinyDuino can be done through a web interface for Arduino called […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 19 Comments on $18 Matchstick is an HDMI TV Stick Running Firefox OS (Crowdfunding)

$18 Matchstick is an HDMI TV Stick Running Firefox OS (Crowdfunding)

A few month ago, a Firefox OS HDMI streaming stick (codenamed netcast) by Mozilla that would compete with Google Chromecast was previewed. It is now called Matchstick, based on Rockchip RK3066 and has just been launched on Kickstarter. MatchStick technical specifications: SoC – Rockchip RK3066 dual core Cortex A9 processor @ 1.2 GHz with Mali-400 MP4 GPU System Memory – 1GB DDR3 (micron) Storage – 4 GB flash.  (FORSEE, NCEFES86 eMMC) Video Output – HDMI Connectivity – 802.11 b/g/n Wi-Fi (AP6181?), but the board supports other Wi-Fi modules include AP6210 and AP6330, and many people are asking for dual band Wi-Fi in comments, so maybe a stretch goal… USB – 1x micro USB port for power Power – 5V via micro USB port. TPS659102 PMIC. Dimensions – 110 x 40 x 11 mm The Firefox OS dongle will come with an HDMI extension Cable, a micro USB Cable, and a […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Arduino Compatible Microduino JoyPad with TFT Display Lets You Play Games, Control Devices, and More (Crowdfunding)

Arduino Compatible Microduino JoyPad with TFT Display Lets You Play Games, Control Devices, and More (Crowdfunding)

Last year, Microduino successfully launched their tiny Arduino board and shields via Kickstarter, and they are now back on Kickstarter with Microduino Joypad, an other Arduino compatible board that also happens to be a gamepad with a small OLED display. It can be used in standalone to control games on the tiny display, as a gamepad for PC or game console, a control interface for quadcopters and robots etc… Microduino Joypad (main board) specifications: MCU – Atmel ATMega328p/1284p/644p or 32U4 via Microduino Core, Core+, CoreUSB boards. (Not part of board but included in all perks) Display I/F – TFT and OLED headers. Separate TFT display board included in all perks. Controls – Left and right joysticks, 4 buttons, and left and right switches. Audio – Microphone Sensors – Light sensor, temperature sensor USB – 2x micro USB ports: one for power and one for charging Expansions – 2x UPin27 headers for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Linux based MOD Duo Multi-Effects Pedal is Powered by an AllWinner A20 SoM (Crowdfunding)

Linux based MOD Duo Multi-Effects Pedal is Powered by an AllWinner A20 SoM (Crowdfunding)

If you are both a maker and a musician, MOD Duo multipurpose pedal may be a fun “toy” to play with. It’s an embedded computer comprised of a Hi-Fi soundcard (baseboard) powered by the same ITEAD Studio A20-CORE system on module found in ITEAD Studio IBOX, fitted into an enclosure with a pedalboard interface, and two graphics displays. You can create and share your own effects, or download the one made by the community using LV2 sound plugins, an open sound processing standard. A MOD Arduino Shield is also available to create new peripherals. Some technical specifications of the MOD Duo: SoC – AllWinner A20 dual core Cortex A7 processor @ 1GHz (AllWinner A23 is part of stretch goals) Two audio inputs Two audio outputs Stereo headphones output MIDI IN and MIDI OUT Cirrus Audio Codec USB – 1x USB Host for bluetooth, Wifi adapters and MIDI peripherals, 1x USB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on RPiSoC Development Board Based on Cypress PSoC 5LP Features Pmod, Raspberry Pi, and Arduino Headers (Crowdfunding)

RPiSoC Development Board Based on Cypress PSoC 5LP Features Pmod, Raspberry Pi, and Arduino Headers (Crowdfunding)

Embedit Electronics, a startup founded by two recent graduates of Rensselaer Polytechnic Institute, USA, has designed a board powered by Cypress Semiconductor PSoC 5LP ARM Cortex M3 system-on-chip with programmable digital and analog I/Os. The board can interface with all Raspberry Pi models, Digilent Pmod peripheral modules, and supports Arduino shields. RPiSoC specifications: SoC – Cypress PSoC 5 with ARM Cortex M3 core at 67MHz , 256 KB Flash Program Memory, with user configurable write protection, and 64KB SRAM Expansions and I/Os: Arduino shield and ICSP compatible headers. 2x Digilent Pmod compatible headers 58 reconfigurable GPIO pins 26-pin ribbon cable connector for use with the Raspberry Pi 8 SIO (Special Input/Output) pins with higher current sink 5-pin MiniProg3 header for programming via MiniProg3 hardware. USB – 1x micro USB port for power, communication and programming. Misc – Reset push button, User accessible LED, Programming switch Power – 5V via micro […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Raspberry Pi Based Slice, and EzeeCube Quad Media Players Support Internal Hard Drives (Crowdfunding)

Raspberry Pi Based Slice, and EzeeCube Quad Media Players Support Internal Hard Drives (Crowdfunding)

Slice is a media player based on Raspberry Pi Compute Module, and EzeeCube Quad is media hub powered by Freescale i.MX6 Quad, and an upgrade to EzeeCube based on i.MX6 dual, which was successfully funded. The underlying hardware between Slice and EzeeCube is much different, but both devices have a lot in common. They are both media players currently being crowd-funded respectively in Kickstarter and Indiegogo, both comes with an internal hard drive, run XBMC, targets typical end-users (rather than tinkerers) and are somewhat pricey. Slice Media Player When I first saw Slice, all I could see was an Raspberry Pi module, put in a case with an internal hard drive bay, and lots of pretty RGB LEDs, and with an air mouse sold for an inflated price of 114 GBP ($190 US) without hard drive or 179 GBP ($300 US) with a 1TB drive, with admittedly some cheaper early […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on $79 STACK Box Home Automation / IoT Gateway Supports Wi-Fi, Ethernet, BLE, XBee, X10, Z-Wave and More (Crowdfunding)

$79 STACK Box Home Automation / IoT Gateway Supports Wi-Fi, Ethernet, BLE, XBee, X10, Z-Wave and More (Crowdfunding)

Cloud Media (Syabas) is better known for their Linux based “Popcorn Hour” media players, and last year I reviewed their FreeOTT streaming media player powered by a Cavium ARM11 processor. The company is now entering the home automation market with the STACK Box (aka XuanBox) also powered by a Cavium ARM11 processor, and supporting various connectivity options to interface with popular smart “things” such as Belkin Wemo and Philips Hue, as well as a Raspberry Pi Bus (26-pin header) to support add-ons. STACK Box specifications: Processor – Cavium ARM11 processor @ 640 MHz (possibly Cavium CELESTIAL CNC1800L. TBC) System Memory – 256MB DDR3 Storage – 512 MB flash + SD card slot Connectivity 10/100M Ethernet Wi-Fi 802.11n with WPS Bluetooth LE 4.0 (included) Z-Wave (included) Dust Networks (extra module required) XBee  (extra module required) X10 (extra module required) Insteon (extra module required) RF433/315 (coming soon) EnOcean (coming soon) ZigBee(coming soon) DCLink(coming […]

Exit mobile version