Linux News - Page 11 of 434 - CNX Software

March 15, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Mekotronics D58 embedded computer features 6 HDMI outputs for video walls or mirrored displays

RK3588 embedded computer 6x HDMI video wall

Mekotronics D58 is a Rockchip RK3588 embedded computer running Android or Linux with six HDMI outputs for 4K video walls or multiple mirrored displays that should be mostly useful for digital signage applications. The system comes with up to 16GB RAM and 128GB eMMC flash, supports NVMe and SATA storage, comes with two GbE ports, WiFi 6 connectivity, optional 4G LTE and GNSS, one 4K-capable HDMI input port, four USB ports, some DB9 connectors for serial communication (RS232, RS485, TTL), and a terminal block with GPIOs and CAN bus. Mekotronics D58 specifications: SoC – Rockchip RK3588 octa-core processor with CPU – 4x Cortex‑A76 cores @ up to 2.4 GHz, 4x Cortex‑A55 core @ 1.8 GHz GPU – Arm Mali-G610 MP4 GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.2, Vulkan 1.2 Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 Video encoder – […]

March 15, 2024 by Debashis Das - 2 Comments

Waveshare Jetson Nano powered mini-computer features a sturdy metal case

Waveshare Launches Jetson Nano Mini Computer

Waveshare has launched the Jetson Nano Mini Kit A, a mini-computer kit powered by Jetson Nano. This kit features the Jetson Nano Module, a cooling fan, and a WiFi module, all inside a sturdy metal case. The mini-computer is built around Nvidia’s Jetson platform housing the Jetson Nano module and features multiple interfaces, including USB connectors, an Ethernet port, an HDMI port, CSI, GPIO, I2C, and RS485 interfaces. It also has an onboard M.2 B KEY slot for installing either a WiFi or 4G module and is compatible with TensorFlow, and PyTorch which makes it well-suited for various AI applications. Waveshare Mini-Computer Specification: GPU – NVIDIA Maxwell architecture with 128 NVIDIA CUDA cores CPU – Quad-core ARM Cortex-A57 processor @ 1.43 GHz Memory – 4 GB 64-bit LPDDR4 1600 MHz; 25.6 GB/s bandwidth Storage – 16 GB eMMC 5.1 Flash Storage, microSD Card Slot Display Output – HDMI interface with […]

March 14, 2024March 14, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arducam KingKong – A Raspberry Pi CM4-based Edge AI camera with global shutter sensor, Myriad X AI accelerator

ArduCam KingKong is a Smart Edge AI camera based on the Raspberry Pi CM4 and system-on-module based on Intel Myriad X AI accelerator that follows the Raspberry Pi 5-powered Arducam PiINSIGHT camera introduced at the beginning of the year. The new product launch aims to provide a complete Raspberry Pi-based camera rather than an accessory for the Raspberry Pi 4/5. Smart cameras built around the Raspberry Pi CM4 are not new as we previously covered the EDATEC ED-AIC2020 IP67-rated industrial AI Edge camera and the StereoPi v2 stereoscopic camera used to create 3D video and 3D depth maps. The ArduCam KingKong adds another option suitable for computer vision applications with an AR0234 global shutter module, PoE support, and a CNC metal enclosure. ArduCam KingKong specifications: SoM – Raspberry Pi Compute Module 4 (CM4) by default CM4104000 Wireless 4GB RAM Lite (0GB eMMC). AI accelerator – Luxonis OAK SOM BW1099 based on Intel […]

March 13, 2024March 19, 2024 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

MeLE PCG02 Pro ultra slim fanless mini PC gets an Intel Processor N100 upgrade

The MeLE PCG02 Pro “mini PC stick” is now available with an Intel Processor N100 Alder Lake-N CPU after being first introduced with an Intel Celeron J4125 (Gemini Lake Refresh) or Celeron N5105 (Jasper Lake) processor in 2022. Just like the MINIX Z100-0dB mini PC we’ve just reviewed, the MeLE PCG02 Pro has a fanless design, but with a slim design that’s just 20mm thick, up to 16GB RAM, up to 256GB eMMC flash, two 4K-capable HDMI ports, Gigabit Ethernet and WiFi 5, three USB 3.2 ports, a microSD card, and a USB-C port for power only. MeLE PCG02 Pro “Surpass” specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W System Memory – 8GB or 16GB LPDDR4x @ 4266 MHz Storage – 128GB or 256GB eMMC flash Video Output – 2x […]

March 12, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Banana Pi launches $30 WiFi 6 router with Triductor TR6560 SoC running a fork of OpenWrt

When Banana Pi started to sell the low-cost Banana Pi BPI-WiFi 6 router board powered by Triductor TR6560 dual-core SoC and TR5220 WiFi 6 chipset, I mentioned they should probably offer a complete system with enclosure and antennas for this to become more popular. It took a while, or about nine months to be precise, but the Banana Pi BPI-WiFi 6 router is now available with a plastic enclosure, four external antennas, an Ethernet cable, and a power supply for $30.90 plus shipping on Aliexpress. Banana Pi BPI-WiFi 6 router specifications: SoC – Triductor TR6560 dual-core Arm Cortex-A9 processor @ 1.2 GHz with LSW (Line-Card Switching) and hardware NAT up to 5 Gbps WiFi chipset – Triductor TR5220 WiFi 6 chipset System Memory – 512 MB DDR3 Storage – 128MB SPI NAND flash Networking 1x Gigabit Ethernet WAN port with optional PoE support 3x Gigabit Ethernet LAN ports 2.4 GHz […]

March 11, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linux 6.8 release – Notable changes, Arm, RISC-V, and MIPS architectures

Linus Torvalds has just announced the release of Linux 6.8 on the Linux kernel mailing list: So it took a bit longer for the commit counts to come down this release than I tend to prefer, but a lot of that seemed to be about various selftest updates (networking in particular) rather than any actual real sign of problems. And the last two weeks have been pretty quiet, so I feel there’s no real reason to delay 6.8. We always have some straggling work, and we’ll end up having some of it pushed to stable rather than hold up the new code. Nothing worrisome enough to keep the regular release schedule from happening. As usual, the shortlog below is just for the last week since rc7, the overall changes in 6.8 are obviously much much bigger. This is not the historically big release that 6.7 was – we seem to […]

March 9, 2024 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

MINIX Z100-0dB review – Part 3: A fanless Intel N100 mini PC tested with Ubuntu 22.04

MINIX Z100-0dB review Ubuntu 22.04 Linux

After the first part of the review with an unboxing and a teardown of the MINIX NEO Z100-0dB mini PC, we tested the fanless Intel N100 mini PC with Windows 11 Pro in the second part, and we are now ready to report our experience with Linux, and more specifically Ubuntu 22.04, on the MINIX Z100-0dB mini PC in the final and third part of the review. We will go through features testing, run some benchmarks to evaluate the performance in Linux, perform storage and network performance tests, check the cooling ability of the mini with a stress test, and also check its power consumption under different scenarios. We will also compare the MINIX Z100-0dB to the actively cooled GEEKOM Mini Air12 mini PC that uses the same Intel Processor N100 CPU. Ubuntu 22.04 installation We will install Ubuntu 22.04 alongside Windows 11 Pro in dual boot configuration, so we […]

March 7, 2024March 6, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Allwinner T527 System-on-Module features octa-core Cortex-A55 CPU, 2 TOPS AI accelerator

MYiR MYC-LT527 is a compact System-on-Module (SoM) based on Allwinner T527 octa-core Arm Cortex-A55 SoC with a 2 TOPS AI accelerator, up to 4GB RAM, 32GB flash, and a land grid array (LGA) comprised of 381 pads with a range of interfaces for displays and cameras, networking, USB, and PCIe, and more. The company also introduced the MYD-LT527 development board to showcase the capabilities of the Allwinner T527 CPU module suitable for a range of applications such as industrial robots, energy and power management, medical equipment, display and controller machines, edge AI boxes and boards, automotive dashboards, and embedded devices that require media and AI functionalities. MYC-LT527 Allwinner T527 System-on-Module MYC-LT527 specifications: SoC – Allwinner T527 CPU Octa-core Arm Cortex-A55 processor with four cores @ 1.80 GHz and four cores @ 1.42GHz E906 RISC-V core up to 200 MHz DSP – 600MHz HIFI4 Audio DSP GPU – Arm Mali-G57 MC1 […]