Linux News - Page 110 of 431 - CNX Software

September 15, 2021 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

ASUS Tinker Board 2S SBC launched for $120 and up

ASUS unveiled the Tinker Board 2 SBC with faster a Rockchip RK3399/OP1 processor together with the ASUS Tinker Board 2S board that adds a 16GB eMMC flash last October without pricing information. The good news is that the 2GB RAM version of Tinker Board 2S is now available on Amazon and Aliexpress for $120 and up. Note you’ll get a 5% discount if you are a follower on Aliexpress for a total of $132.99 including shipping. Compared to the first Tinker Board, the new boards are also offered with up to 4GB LPDDR4 RAM, an additional video output option with USB-C DisplayPort Alt mode, an upgrade to USB 3.0 ports and WiFi 5, RTC battery support, and a more stable 12V to 19V DC input. Here’s a reminder of Tinker Board 2S specifications: SoC – Rockchip RK3399 (OP1) hexa-core processor with 2x Arm Cortex-A72 cores up to 2.0 GHz, four […]

September 13, 2021September 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

RK3399 based Industrial computer runs Debian 9.0 or Android 7.1

Vecow EIC-1000 in an industrial Edge AI computer powered by Rockchip RK3399 hexa-core Cortex-A72/A53 processor with 9V to 55VDC wide-range supply input, an operating temperature range of 0°C to 70°C, and designed for digital signage, factory automation, smart retail, and other AIoT/Industry 4.0 applications. The fanless mini PC is equipped with 2 GB DDR3 SDRAM and 32GB eMMC flash, offers 4K video output via HDMI, Gigabit Ethernet, USB 3.0/2.0, and RS232/RS485 serial ports, and more. Vecow EIC-1000 specifications: SoC- Rockchip RK3399 hexa-core Arm processor with dual-core Arm Cortex-A72 @ 2.0 GHz, quad-core Cortex-A53 @ 1.6GHz, Arm Mali-T860MP4 GPU System Memory – 1GB or 2GB DDR3L 1066MHz SDRAM Storage – 32GB eMMC flash, MicroSD card socket Video Output – HDMI 2.0 output up to 4Kp60 Video Encoder – Up to 1080p30 H.264/MVC/VP8 Decoder Up to 4Kp60 H.264/H.265 10-bit, VP9 Up to 1080p60 MPEG-4/MPEG-2/VP8 Audio – 3.5mm headphone and microphone jacks, Networking […]

September 10, 2021September 14, 2021 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Beelink LZX – A Zhaoxin KX-6640MA based x86 Mini PC you may never see

Beyond Intel and AMD, there are other x86 processors in the wild from DM&P and Zhaoxin. We’ve written about the latter in a QNAP NAS earlier this year, but now it turns out there’s also a Zhaxin-based mini PC with Beelink LZX based on a Zhaoxin KX-6640MA quad-core x86 processor that showed up on Shopee Indonesia for 3.86 million Indonesian Rupiahs, or about $270 US. The computer comes with 8GB RAM by default but supports up to 64GB, as well as dual M.2 NVMe and SATA III storage, two 4Kp60 capable HDMI ports, dual Gigabit Ethernet, and more. Beelink LZX specifications: SoC – Zhaoxin KX-6640MA quad-core processor @ 2.1 GHz / 2.6 GHz (Turbo) with 4MB cache, C-960 Graphics (support 4K HD); TDP: 25W System Memory – 8GB DDR4 RAM upgradeable to 64GB via two SO-DIMM memory slots Storage – 256GB M.2 NVMe SSD, additional M.2 2280 slot for NVMe […]

September 8, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Pantera Pico PC ultra-compact mini PC ships with Windows 10 or Ubuntu (Crowdfunding)

The Pantera Pico PC is an ultra-compact Gemini Lake Refresh mini computer similar to the Chuwi Larkbox Pro, that was supposed to launch in December 2020 through an Indiegogo campaign. Let’s say there have been delays, and the company – XDO Tech – has only just launched the Pico PC on Kickstarter for $149 and up. Pantera Pico PC specifications: SoC – Intel Celeron J4125 quad-core Gemini Lake Refresh @ 2.0 / 2.7 GHz (Turbo) / 2.4 GHz (Turbo all cores) with Intel UHD Graphics 600 @ 250/750 MHz; 10W TDP System Memory – Dual-channel 4GB or 8GB LPDDR4 Storage – 64 GB to 1TB M.2 2242 SSD, MicroSD card socket Video Output – HDMI 2.0 up to 4Kp60 Audio – 3.5mm speaker/microphone jack, digital audio via HDMI Connectivity Dual-Band WiFi (allegedly WiFi 6, but limited to 422 Mbps?), Bluetooth 5.1 USB – 3x USB3.0, 1x USB2.0 Misc – Power button, […]

September 6, 2021September 6, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Jetson Nano & Xavier NX carrier board offers 3x M.2 sockets, 10x RS232/RS485 interfaces

Geniatech NVJ100AI/NVJ100AIX is a carrier board fitted with either Jetson Nano or Jetson Xavier NX SoM with good expansion capabilities thanks to three M.2 sockets and ten RS232 and/or RS485 interfaces, plus the usual Gigabit Ethernet, USB ports, HDMI video interface, etc… Geniatech NVJ100AI/NVJ100AIX specifications: SoM Geniatech NVJ100AI – NVIDIA Jetson Nano with CPU – Quad-core Arm Cortex A57 MPCore processor @ up to 1.43 GHz GPU – Maxwell GPU, 128 CUDA core up to 512 GFLOPS (FP16) System Memory – 4GB LPDDR4 Storage – 16GB eMMC flash AI Performance – Up to 472 GFLOPS in 10 Watts mode Geniatech NVJ100AIX – NVIDIA Jetson Xavier NX CPU – Hexa-core NVIDIA Carmel ARMv8.2 64-bit CPU with 6MB L2 + 4MB L3 cache GPU – 384-core NVIDIA Volta GPU with 48 Tensor Cores Dedicated AI accelerators – 2x NVDLA Engines, 7-Way VLIW Vision Processor System Memory – 8GB LPDDR4 Storage – 16GB […]

September 6, 2021 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

OpenWrt 21.02 released with WPA3, HTTPS, TLS enabled by default

OpenWrt 21.02 has just been released with higher security with WPA3, HTTPS & TLS enabled by default, as well as initial support for the Distributed Switch Architecture (DSA), the Linux standard for configurable Ethernet switches. OpenWrt is the most popular open-source Linux distribution for routers and entry-level Linux-capable embedded systems, and the latest release includes over 5800 commits since the release of OpenWrt 19.07 in January 2020. WPA3 was already supported in OpenWrt 19.07, but not enabled by default, OpenWrt 20.02 changes that, together with TLS thanks to trusted CA certificates from Mozilla. That means LuCi interface, wget, opkg package manager can all support HTTPS out-of-the-box. Note that HTTPS redirection can be disabled for LuCI in the configuration files. Another security change is that SELinux is now supported by OpenWrt, but not enabled by default. OpenWrt 21.02’s DSA implementation replaces the current swconfig system, but not all targets have been […]

September 3, 2021September 3, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Geniatech XPI-iMX8MM SBC offers NXP i.MX 8M Mini processor in Raspberry Pi form factor

Geniatech XPI-iMX8MM is a new member of the company’s XPI SBC family following Raspberry Pi 3 form factor and equipped with the 14nm NXP i.MX 8M Mini quad-core Cortex-A53 processor. The new board follows XPI-S905X (Amlogic S905X), XPI-3128 (Rockchip RK3128), and XPI-3288 (Rockchip RK3288) single board computer introduced over the last three years with many of the same features including HDMI output, four USB ports, Ethernet, and so on. Geniatech XPI-IMX8MM specifications: SoC –NXP i.MX 8M Mini quad-core Arm Cortex A53 processor @ up to 1.8 GHz with Cortex-M4 real-time core, 2D and 3D Vivante GPUs, 1080p60 H.265/H.264 video decoder, 1080p60 H.264 video encoder System Memory – 1GB (default) to 4GB LPDDR4 Storage – 8GB (default) to 128GB eMMC 5.x flash, MicroSD card slot Video & Audio Output HDMI 1.4 up to 4Kp30 3.5mm AV jack with composite video and stereo audio 2-lane MIPI DSI connector Camera – 2-lane MIPI […]

September 2, 2021September 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Armbian 21.08 for Arm boards ships with latest Linux 5.10 LTS

Armbian provides stable releases four times a year, and Armbian 21.08 has just been released offering minimal, server or XFCE, Cinnamon and Budgie desktop Linux 5.10 LTS images for Arm boards, as well as a build system to customize your own image. If you’ve been using an Arm SBC that is NOT a Raspberry Pi board, you’ve probably been told to use Armbian, as the community is providing Debian and Ubuntu images for over 100 Arm boards that are either “Supported”, “WIP” (suitable for testing), or “CSC” (no official support, aka you’re on your own). Armbian 21.08 highlights (Note: EDGE are daily builds following daily builds of the Linux kernel and fresh packages from Debian sid, Ubuntu 21.04 “hirsute” or Ubuntu 21.10 “impish” userland): Based on Linux 5.10.59 released on August 15, 2021 Minimal, server or XFCE, Cinnamon, and Budgie desktop Fast automated language selection on the first run Regular […]