Linux News - Page 337 of 478 - CNX Software

February 4, 2016April 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

FriendlyARM NanoPC-T2 Board Gets More Storage, WiFi & Bluetooth, Stays Cool, and Costs Less

FriendlyARM NanoPC-T1 board powered by Samsung Exynos 4412 processor with 1GB RAM and 4GB eMMC flash was unveiled at the start of 2014 for $69. The company has now announced NanoPC-T2 with Samsung S5P4418 processor with 1GB RAM, and 8GB Flash, as well as WiFi and Bluetooth, as Gigabit Ethernet all of which were missing in the first version. NanoPC-T2 also has a power management chip, and a larger heatsink, meaning that it does not suffer from overheating like NanoPi2 according to FriendlyARM. NanoPC-T2 specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz with Mali-400MP GPU System Memory – 1GB 32bit DDR3 RAM Storage – 8GB eMMC flash, and 1x SD card slot (on the bottom of the board) Connectivity – Gigabit Ethernet, 802.11 b/g/n WiFi and Bluetooth LE 4.0 (Ampak AP6212) with on-board chip antenna and 1x IPX antenna connector Video Output / Display […]

February 4, 2016February 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Olimex H3-OLinuXino-NANO is a Smaller Allwinner H3 Board with HDMI, Ethernet, and Many I/Os

Allwinner H3 processor is quite popular in development boards thanks to some of Shenzhen Xunlong’s Orange Pi boards such as Orange Pi PC or Orange Pi One. However, some specific features may not work 0ut of the box, or are undocumented, so it’s always a plus when more companies create boards for a platform, and that’s exactly what Olimex has done with H3-OlinuXino-NANO, a board that’s smaller than any Orange Pi boards, the first open source hardware Allwinner H3 board on the market, and featuring many more I/O pins available. Olimex H3-OlinuXino-NANO specifications: SoC – Allwinner H3 quad core Cortex-A7 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 512MB of DDR3 RAM Storage – micro SD card slot Video Output- HDMI up to 1080p60 Connectivity – 10/100M Ethernet USB – 2x USB host ports + 1x micro USB OTG port Expansion – Optional 2x 40-pin headers with GPIOs, […]

February 3, 2016February 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 57 Comments

Hardkernel ODROID-C2 64-Bit ARM Development Board to Sell for $40 Next Month

We previously knew ODROID-C2 was in development thanks to a document and source code from Amlogic themselves. We did not have the full details at the time, and Amlogic’s document even got the RAM capacity wrong. Hardkernel has finally announced ODROID-C2 development board based on Amlogic S905 will be selling on March 2016 for $40, and released specifications and some photos. ODROID-C2 specifications: SoC – Amlogic S905 quad core cortex-A53 processor with 3+2 cores Mali-450 GPU System Memory – 2GB DDR3 SDRAM Storage – eMMC module socket with 8, 16, 32, or 64GB module by Toshiba or Sandisk + micro SD slot supporting UHS-1 SD cards. Video Output – HDMI 2.0 Connectivity – Gigabit Ethernet (Realtek RTL8211F) USB – 4x USB 2.0 host ports + micro USB OTG port Expansion Header 40-pin header with GPIO, I2C, UART, and ADC ; All I/Os are 3.3V, except ADC that is limited to […]

February 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

WeTek Play Now Supports OpenPLi Open Source Linux Distribution for DVB Receivers

WeTek Play satellite receiver was initially launched with Android and OpenELEC support, but the community started to provide other operating systems such as Ubuntu, Elementary OS, Lakka and Enigma 2, and the hardware is even used to receive educational materials or emergency info via satellite thanks to Outernet project. The device now support OpenPLi Linux based distributions for DVB receivers. If you want to try, you can download one of the latest images of OpenPLi for WeTek Play by loading the firmware onto an SD card. Bear in mind that official has just started so some features may not be implemented, and OpenPLi documentation specific to WeTek Play is basically inexistent. Support is available on the forums. If you want to get an idea about what OpenPLi is capable, you may however check out th list of specific features in the wiki, including PLi Movieplayer to allow you to playback […]

February 2, 2016February 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

AAEON BOXER-6404 Bay Trail Embedded Computer Comes with 4 GbE Ports, 2 HDMI Outputs

AAEON has recently launched BOXER-6404 embedded box PC suitable to industrial application, powered by Intel Celeron J1900 “Bay Trail-D” or Celeron N2807 “Bay Trail-M” processor, with up to 8GB RAM, a CFast slot, four Gigabit Ethernet ports, and to HDMI outputs. BOXER-6404 mini PC specifications: SoC Intel Celeron J1900 quad core processor @ 2.0 / 2.42 GHz with Intel HD graphics (10W TDP) OR Intel Celeron N2807 dual core processor @ 1.58 / 2.16 GHz with Intel HD graphics (5W TDP) System Memory – 1x 204-pin DDR3L SODIMM slot for up to 4GB RAM with N2807), and up to 8GB RAM with J1900 Storage – CFast Slot Video and Audio Output – 1x or 2x HDMI ports Connectivity – 2x or 4x Gigabit Ethernet RJ45 ports USB – 2x USB 2.0 ports, 1x USB 3.0 port Serial – 1x RS232 DB9 port Expansion – 1x mini card with USB interface […]

January 31, 2016January 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MINIX NGC-1 Braswell Mini PC Runs Windows 10 or Ubuntu

MINIX showcased some unnamed Braswell mini PCs at IFA 2015 last September, but since then the company has been pretty quiet about their new Intel based mini PCs. The good news is that MINIX NGC-1 will be launched in about two weeks with an Intel Celeron N3150 quad core “Braswell” processor coupled with 4GB RAM, and 128GB M.2 SSD, and beside running Windows 10 64-bit, it will also support Ubuntu. MINIX NGC-1 specifications: SoC – Intel Celeron N3150 quad-core processor @ 1.6 GHz / 2.08 GHz (Turbo) with 2MB L2 cache, and Intel HD graphics with 12EU (4W SDP / 6W TDP) System Memory – 4GB DDR3L Storage – 128 M.2 SSD Video Output – HDMI 1.4 up to 4K @ 30 Hz, and mini DisplayPort Audio I/O – HDMI, 3.5mm stereo jack (microphone + headphone), and optical S/PDIF Connectivity – Gigabit Ethernet, 802.11ac WiFi and Bluetooth 4.2 with two […]

January 29, 2016January 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Intrinsyc Open-Q 600 Single Board Computer is Powered by Qualcomm Snapdragon 600 Processor

Intrinsyc has released several Qualcomm Snapdragon development kits and system-on-modules over the last few years, and the company has now unveiled their first single board computer with Open-Q 600 SBC powered by Snapdragon 600 quad core processor with 2GB RAM and 16GB eMMC flash. Open-Q 600 specifications: SoC – Qualcomm Snapdragon 600 (APQ8064) quad core Krait 300 processor @ 1.7GHz with 2MB L2 cache, Adreno 320 GPU, and Hexagon QDSP6V4 DSP System Memory – 2GB PCDDR3 RAM @ 533MHz; dual channel 32-bit Storage – 16GB eMMC 4.5 flash, micro SD card slot Video Output / Display I/F – HDMI 1.4a port for up to 1080p @ 60Hz, 2-lane MIPI-DSI connector Audio – HDMI, 3.5mm stereo headset output with mono input, 3.5mm Mic line in; Qualcomm WCD9311 audio codec Camera – 2-lane MIPI-CSI connector supporting 8 MP camera up to WXGA resolution @ 60 fps Connectivity Gigabit Ethernet (RJ45) via Qualcomm […]

January 28, 2016January 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

BeagleBone Black Industrial 4G is Red, and Offers an Extended Temperature Range

BeagleBone Black is a great little board for hobbyists with plenty of I/Os, and decent software support, but the development board has not been designed to be used in low or high temperatures as found in some industrial settings, so Element14 has designed BeagleBone Black Industrial 4G with the same specifications as BeagleBone Black Rev C, but a red PCB, support for an extended temperature range between -20 and +85°C, and additional board protection with a conformal coating. BeagleBone Black Industrial 4G Specifications: SoC – Texas Instruments Sitara AM3358BZCZA10 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3L @ 800 MHz Storage – 4GB eMMC + micro SD slot Video Out/Display I/F – HDMI and LCD interfaces Connectivity – 10/100M Ethernet (RJ45) Serial Port – UART0 access via 6 pin 3.3V TTL Header. Header is populated USB – USB 2.0 Client port: Access to […]