Linux News - Page 347 of 477 - CNX Software

October 30, 2015October 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

NanoPi2 is a Tiny Board with Samsung S5P4418 Processor, WiFi and Bluetooth Connectivity

FriendlyARM released NanoPi board this summer, a small and inexpensive development board based on Samsung S3C2451 ARM9 processor with both WiFi and Bluetooth connectivity. The company has now unveils a more powerful, and slightly wider, version with NanoPi2 featuring Samsung S5P4418 quad core Cortex A9 processor with 1GB RAM, AP6212 wireless module, a new HDMI output, and the same connectors for I/Os and LCD displays. NanoPi2 specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz System Memory – 1GB 32bit DDR3 Storage – 2 x Micro SD Slot Connectivity – 802.11 b/g/n WiFi and Bluetooth LE 4.0 via AP6212 module Video Output / Display I/F- 1x HDMI 1.4a, 0.5 mm pitch SMT FPC seat for type-A full-color LCD (RGB: 8-8-8) Camera – 24-pin DVP interface USB – 1x USB Host port; 1x micro USB 2.0 OTG port for power and data Expansions Headers – 40-pin […]

October 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Compulab Unveils CL-SOM-iMX6UL Freescale i.MX 6UltraLite System-On-Module and SBC-iMX6UL SBC

Compulab has launched a CL-SOM-iMX6UL system-on-module based on Freescale i.MX 6UltraLite ARM Cortex A7 processor with up to 1GB DDR3 and 32GB eMMC flash. The module can be coupled with SB-SOM-iMX6UL carrier board to form SBC-iMX6UL single board computer targeting industrial and embedded applications. CL-SOM-iMX6UL specifications: SoC – Freescale i.MX6 UltraLite Cortex-A7 processor @ 528MHz System Memory – Up to 1GB DDR3 Storage – Up to 32GB on-board eMMC, Up to 1GB on-board SLC NAND, SPI flash, I2C EEPROM Connectivity – Dual-band, dual-antenna 2×2 802.11a/b/g/n WiFi, Bluetooth 4.1 BLE (Ti WiLink 8), 10/100M Ethernet PHY (with optional bypass) Audio – WM8731 audio codec with stereo line-out, line-in, mic, S/PDIF input/output Other I/Os via 204-pin SODIMM edge connector Display Parallel 24-bit display interface up to 1366 x 768 Touchscreen 4/5/8-wire resistive touch-screen support Capacitive touch-screen support through SPI interface USB – 1x USB2.0 OTG + 4x USB2.0 host ports Up to […]

October 29, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Getting Started with NodeMCU Board Powered by ESP8266 WiSoC

Since ESP8266 is now so popular, I’ve recently bought a NodeMCU board to try it. I selected this board because the latest version of the board is breadboard-friendly, integrates a USB to serial chip, and it can be powered by a simple USB to micro USB cable. I also noticed a ESP8266 tutorial with NodeMCU firmware by SwitchDoc Labs the other day (using ESP-12 and Adafruit Huzzah), which I applied to my NodeMCU board, but since I encountered a few issues, I decided to report my findings, and write my own little getting started guide to switch on/off LED and GPIOs using a web interface. NodeMCU v0.9 and NodeMCU v1.0 If you are going to purchase a NodeMCU board it’s important to know there are two official versions: NodeMCU v0.9 with ESP-12 module NodeMCU v1.0 with ESP-12E module The main complain about NodeMCU v0.9 is that while it fits on […]

October 27, 2015May 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

$64 Allwinner V3 Action Cameras Support 4K Video Recording (or Not?)

An “Allwinner V3 4K Ultra HD DV Sport Camera” just appeared in GeekBuying product feed which the company sells for $84.39, and searching for alternative sellers led me to Soocoo F60 4K action camera sold for $63.34 on GearBest. Both cameras look the same, and the price appears amazing cheap as 4K cameras such as GoPro Hero4 or Sony X1000V normally sell for $500 and more. But one of the tricks is that both “4K” cameras are likely based on Sunchip 4K camera design, which does support 4K video recording, but only at 15 fps. Soocoo F60 camera specifications: SoC – Allwinner V3 ARM Cortex A7 processor @ 1.2GHz System Memory – N/A Storage – micro SD card up to 64GB Display – 2″ LCD Camera OmniVision OV4689 image sensor (4MP according to sensor page, but 16MP on camera description, probably achieved with extrapolation). 170-degree wide angle Recording time up […]

October 24, 2015October 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

giggleBits Hackable ARM & FPGA Router Comes with an SFP Cage and 5 Gigabit Ethernet Ports (Crowdfunding)

Remember Snickerdoodle board? If you don’t, the board is one of the cheapest Xilinx Zynq available on the market, and the project is currently on CrowdSupply, and 75% funded with 28 days left. They’ve just posted an update about a new daughterboard that I found interesting: giggleBits which provides 5 Gigabit Ethernet and an SFP cage on top of WiFi 802.11 b/g/n and Bluetooth connectivity already found on Snickerdoodle board. giggleBits + snickerdoodle specifications: SoC/Memory/Storage/WiFi via Snickerdoodle board: SoC Xilinx Zynq-7010 dual core Cortex A9 processor @ 667 MHz + FPGA with 430K gates or Xilinx Zynq-7020 dual core Cortex A9 processor @ 866 MHz + FPGA with 1.3million gates (~430K ASIC gates) System Memory – 512MB or 1GB LPDDR2-800 Storage – micro SD card slot, 16MB boot flash Ti Wilink 8 – single or dual band 802.11 b/g/n WiFi + Bluetooth 4.0 Expansion – 4x 40-pin TFM headers for access […]

October 21, 2015October 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

How to Use an ESP8266 Board as a WiFi to Serial Debug Board

Telnet and SSH are great to access a Linux device, machine and computer remotely when they are already running, but when you are working on the bootloader and/or kernel themselves, you’ll have to use a serial port to access the terminal / serial console. Boards used to get an RS232 port which you connected to your computer with a NULL modem cable, but these days, most boards and devices expose TTL signals and require a USB to TTL debug board to access the console via a USB cable. If you only have one device close to you computer that’s fine, but if your testbed is a little further. or you need to access the serial console on multiple boards you could consider using ESP8266 module to export the terminal over WiFi. This is exactly what Zoobab did above with a GL.inet router running OpenWRT and NodeMCU board with ESP-12(E) module […]

October 20, 2015October 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

EzeeCube Linux Media Hub Unboxing and Teardown

EzeeCube is a Linux based Kodi Media Hub powered by Freescale i.MX6Quad processor with one internal 1TB hard drive and up to 8TB extra storage via four stackable 2TB hard drive module, as well as an option for a Blu-Ray player module. Beside playing video, it’s also designed to store your pictures and videos like a cloud service such as dropbox, but without privacy concerns since data is only stored in your own EzeeCube. The company launched an Indiegogo campaign in Q2 2014 which ended up being pretty successful having raised over $160,000, and as they are now shipping rewards to backers, I’ve also been sent a unit. Today, I’ll check out the hardware, and will review the unit probably sometimes next month. EzeeCube Unboxing The device came in a cardboard package with some EzeeCube branding, and some features like Freescale quad core processor, a 2TB hard drive (which finally […]

October 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Compulab Unveils Texas Instruments Sitara AM5718 / AM5728 SoM and Single Board Computer

After last week formal launch of Texas Instruments Sitara AM572x processor, and Beagleboard-X15 development board, Compulab has now introduced CL-SOM-AM57x System-on-Module based on TI Sitara AM5718 or AM5728 SoC, as well as the corresponding SBC-AM57x single board computer. Both target industrial automation and control systems, and network connectivity options also make them suitable for networking, communications and IoT applications. CL-SOM-AM57X module specifications: SoC – Texas Instruments Sitara AM5728 or AM5718 SoC with: Dual (AM5728) or single (AM5718) Cortex A15 processor @ up to 1.5 GHz Dual core PowerVR SGX544 3D GPU, Vivante GC320 2D GPU Two Cortex M4 cores @ 212 MHz Dual TMS320C66x DSP @ 700 MHz Video IVA-HD 1080p video sub-system Four 32-bit PRUs (Programmable Real-time Units) System Memory – 512MB to 4GB DDR3 Storage – 4 to 32GB on-board eMMC, 512MB to 1GB on-board SLC NAND Connectivity – On-board WiFi 802.11a/b/g/n + Bluetooth 4.1 BLE (TI WiLink […]