Linux News - Page 69 of 477 - CNX Software

October 26, 2023October 25, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Portenta Hat Carrier board adds Raspberry Pi HAT support to the Portenta X8 SBC

The Arduino Portenta Hat Carrier board aims to interface the Linux-capable Portenta X8 board with the vast ecosystem of Raspberry Pi HAT (Hardware on Top) expansion boards. Introduced last year, the Arduino Portenta X8 is the first Arduino Pro hardware that can run Linux thanks to its NXP i.MX 8M Mini Arm Cortex-A53 quad-core processor. But it comes in a tiny 66.04 x 25.4 mm form factor which may be great for integration into products, but for prototyping or design of products such as IoT gateways, the company has now launched the Portenta Hat Carrier that enables the board to easily connect with the Raspberry Pi HATs available today. Portenta Hat Carrier specifications: Compatible with the Portenta X8 board and future Portenta with the same high-density connectors Storage – MicroSD card slot Camera I/F – MIPI CSI camera connector (CNXSoft: Arduino does not explicitly say whether it’s compatible with the […]

October 24, 2023October 24, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

CanMV-K230 AI development board features Kendryte K230 dual-core 64-bit RISC-V processor

CanMV-K230 is a credit card-sized development board for AI and computer vision applications based on the Kendryte K230 dual-core C908 64-bit RISC-V processor with built-in KPU (Knowledge Process Unit) and various interfaces such as MIPI CSI inputs and Ethernet. The first Kendryte RISC-V AI processor was launched in 2018 with the K210 which I tested with the Grove AI HAT and Maixduino board and found fun to experiment with, but noted that performance was limited. Since then the company introduced the K510 mid-range AI processor with a more powerful 3 TOPS AI accelerator, and the K230 entry-level successor to the K210 – which was planned for 2022 in a 2021 roadmap – has now just been launched and integrated into the CanMV-K230 development board. CanMV-K230 specifications: SoC – Kendryte K230 CPU 64-bit RISC-V processor @ 1.6GHz with RISC-V Vector Extension 1.0, FPU 64-bit RISC-V processor @ 800MHz with support for […]

October 24, 2023October 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

DSOM-020R PX30 development board review – Unboxing, Benchmarks, and Zigbee gateway

DSOM-020 PX30 Development Board review zigbee gateway

Dusun IoT DSOM-020R PX30 is a development board based on the company’s 1.3GHz Rockchip PX30K quad-core Cortex-A35 module of the same name designed for industrial applications that emphasize reliability and power efficiency. The board comes with various ports and expansion capabilities with support for monitors, microphones, and sensors through its carrier board in order to create prototypes and develop software before integrating the SOM DSOM-020 PX30 system-on-module into your own custom carrier board and product. As the company stipulates on the website, the development board is suitable for AIoT equipment, vehicle control, gaming platforms, smart displays, medical equipment, vending machines, and industrial computers. Let’s start the review with an unboxing of the DSOM-020R PX30 development board to find out more. DSOM-020R PX30 development board unboxing Dusun IoT sent us a basic kit of the DSOM-020R PX30 development board for review with a carrier board, the DSOM-020 PX30 system-on-module module, a […]

October 23, 2023October 26, 2023 by Sponsored Post - No Comments

GEEKOM Mini IT11 (Core i7-11390H) mini PC’s price drops to $499 with 32GB RAM, 1TB SSD (Sponsored)

Mini IT11 Core i7-11390H mini PC coupon code

GEEKOM has another promotion for the Mini IT11 mini PC powered by an Intel Core i7-11390H quad-core/8-thread Tiger Lake processor with 32GB of RAM and a 1TB NVMe SSD as the compact computer sells for just $499 after applying the coupon code cnxsoftwareit11 for a $50 discount. Prices have come down a lot in the last six months, as last April, the company organized an Easter promotion for the Mini IT11 (Core i7-11390H) mini PC with 16GB RAM and 512GB SSD for $549. So this time, we get an extra $50 discount, plus extra RAM and storage. GEEKOM Mini IT11 (32GB+1TB) specifications: SoC – Intel Core i7-11390H quad-core/8-thread Tiger Lake processor @ up 2.9 GHz / 5.0 GHz (Turbo) with 12MB cache, 96EU Intel Iris Xe graphics @ 1.40 GHz; TDP: 28W/35W System Memory – 32GB DDR4 SO-DIMM dual-channel memory, upgradeable up to 64GB Storage 1TB SSD (2280 M.2 PCIe), […]

October 20, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mixtile Cluster Box supports four Rockchip RK3588 SBCs connected over PCIe

The Mixtile Cluster Box is comprised of four Mixtile Blade 3 Pico-ITX single board computers each powered by a Rockchip RK3588 processor and connected over a 4-lane PCIe Gen3 interface through a U.2 to PCIe/SATA breakout board. We mentioned the Cluster Box last year, but Mixtile had few details about it at the time. The company has now released more technical information, worked on the software, and just launched the box for $339 (without the SBCs). Mixtile Cluster Box specifications: Supported SBCs – Up to 4x Mixtile Blade 3 with Rockchip RK3588, up to 32GB LPDDR4 each, up to 256GB eMMC flash each Control board running OpenWrt 22.03 SoC – MediaTek MT7620A MIPS processor @ 580 MHz System Memory 256 MB DDR2 Storage – 16 MB SPI Flash PCIe Switch – ASMedia ASM2824 with four PCIe 3.0 4-lane ports Storage interfaces via 4x U.2 breakout boards 4x NVMe M.2 M-Key […]

October 19, 2023October 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Generative AI on NVIDIA Jetson Orin, Jetpack 6 SDK to support multiple OSes

NVIDIA has had several announcements at ROSCon 2023 related to robotics & embedded with highlights including generative AI on the NVIDIA Jetson Orin module and the Jetpack 6 SDK will be released next month (November 2023) with supports for Ubuntu as usual, but also other operating systems and platforms such as Debian, Yocto, Wind River, Redhawk RTOS, and Balena. Generative AI on NVIDIA Jetson Orin There’s been a lot of hype in the last year about generative AI thanks to services such as ChatGPT, Google Bard, or Microsoft Bing Chat. But those rely on closed-source software that runs on powerful servers in the cloud. As we noted in our article about the “AI in a box” offline LLM solution there are some open-source projects such as Whisper speech-to-text model and Llama2 language models that could be run on embedded hardware at the edge, but as noted by some readers platforms […]

October 18, 2023October 18, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

SiFive announces Intelligence X390 NPU, Performance P870 RISC-V core

SiFive Performance P870 RISC V Intelligence X390 NPU

SiFive has announced two new high-performance IP blocks with the Intelligence X390 NPU and the Performance P870 RISC-V core that should find their way into SoC designed for Generative AI and ML applications. We had already covered the Performance P870 and its automotive sibling – the P870-A – from information in an earlier presentation, but the SiFive Intelligence X390 NPU is new to me and appears to be aimed at generative AI in data centers, although we will very soon be seeing companies implement generative AI at the edge in pretty powerful embedded devices. SiFive Performance P870 highlights: Full support for the RVA23 RISC-V profile specification and Vector 1.0 and Vector Crypto Six-wide, out-of-order 64-bit core Up to a 32-core cluster >12 SpecINT2k6/GHz, or a 50% peak single thread performance upgrade over the previous generation SiFive Performance P670 SiFive Features 2x 128b VLEN RVV Vector crypto and hypervisor extensions IOMMU […]

October 17, 2023October 17, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Hummingboard 8P Edge AI SBC combines NXP i.MX 8M Plus SoC with Hailo-8 AI accelerator

Hummingboard 8P Edge AI Pico-ITX SBC combines an NXP i.MX 8M Plus processor – itself with a 2.3 TOPS NPU – with the 26 TOPS Hailo-8 AI accelerator for edge AI applications such as smart cameras and automated optical inspection. The compact board comes with up to 8GB RAM, up to 128GB eMMC flash, two gigabit Ethernet ports including one with PoE, WiFi 5, a MIPI camera interface, HDMI and micro HDMI ports, two USB 3.0 ports, and more. Hummingboard 8P Edge AI specifications: SoC – NXP i.MX 8M Plus quad-core Cortex-A53 @ up to 1.8 GHz with Arm Cortex-M7 @ up to 800 MHz, Vivante GC7000UL 3D GPU, Vivante GC520L 2D GPU, 2.3 TOPS NPU System Memory – Up to 8GB LPDDR4 Storage – Up to 128GB eMMC flash, microSD card slot AI accelerator – M.2 Hailo-8 module delivering up to 26 TOPS Video Output – HDMI and Micro […]