mini pc News - Page 26 of 138 - CNX Software

September 22, 2022September 22, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

OnLogic IGN800 Industrial Raspberry Pi Edge Gateway runs Ignition Edge software

OnLogic IGN800 is an industrial edge gateway based on the Raspberry Pi CM4 module pre-loaded with the Ignition Edge HMI, SCADA (Supervisory Control And Data Acquisition), MES, and IIoT software platform from Inductive Automation. The hardware is not exactly new, as the Onlogic IGN800 is simply the OnLogic Factor 201 industrial PC introduced earlier this year, but that ships with Ignition Edge in order to provide a cost-effective solution for automation projects. OnLogic IGN800 specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Arm Cortex-A72 processor @ up to 1.5 GHz, up to 8GB LPDDR4 RAM, up to 32GB eMMC flash Additional storage – Optional M.2 SATA SSD (See Expansion section) Video Output – HDMI port up to 4Kp60 Networking 2x Gigabit Ethernet LAN (Optional PoE PD Input) via Realtek RTL8153 controller Optional WiFi/Bluetooth module on Raspberry Pi CM4 module + 3x antenna holes Optional 4G LTE wireless module […]

September 15, 2022September 17, 2022 by Ian W MORRISON (Linuxium) - No Comments

MeLE Quieter HD3Q Review – A fanless mini PC with dual-channel memory, 2.5-inch SATA bay

MeLE has launched a new range of passive mini PCs known as the ‘Quieter HD Series’ and first in the lineup is the Quieter HD3Q. Not only does this new mini PC address the main criticism of their earlier models by now including dual-channel memory, but it is also slightly larger allowing the ability to add a 2.5” SATA drive, and also has a higher power limit to improve performance. MeLE kindly sent one for review and I’ve looked at performance running both Windows and Ubuntu. MeLE Quieter HD3Q hardware overview The MeLE Quieter HD3Q consists of a 150 x 105 x 37mm (5.91 x 4.13 x 1.46 inches) rectangular plastic case with a metal base plate. Gone are the faux heat spreader fins from the top of the case as it is now finished with a very fine dimple effect. As a passively cooled mini PC, it uses Intel’s […]

September 7, 2022September 7, 2022 by Ian W MORRISON (Linuxium) - 2 Comments

Beelink SEi11 Pro Review – An Intel Core i5-11320H mini PC tested with Windows 11, Ubuntu 22.04

The latest mini PC marketed in the ‘Pro’ range from Beelink is the SEi11 Pro and features one of last year’s Intel H-series processors typically used in gaming laptops. Beelink kindly sent one for review and I’ve looked at performance running both Windows 11 and Ubuntu 22.04. Beelink SEi11 Pro hardware overview The Beelink SEi11 Pro physically consists of a 126 x 113 x 40mm (4.96 x 4.45 x 1.57 inches) square metal case. As an actively cooled mini PC, it uses Intel’s ‘10 nm SuperFin’ Tiger Lake processor and the review model included an i5-11320H which is a quad-core 8-thread 3.20 GHz Core processor (at 35W TDP) boosting to 4.50 GHz with Intel’s Iris Xe Graphics. The front panel has an illuminated power button, a 3.5mm headphone jack, a data-only Type-C USB 3.1 port, dual USB 3.1 ports and a reset pin-hole ‘CLR CMOS’. The rear panel includes a […]

September 7, 2022September 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Odyssey Blue mini PC bundle ships with Frigate open-source NVR, Coral USB AI accelerator

Odyssey Blue mini PC based on the ODYSSEY-X86J4125 SBC is now offered as part of a bundle with Frigate open-source NVR platform with support for real-time local object detection, and an Coral USB AI accelerator. The Odyssey Blue mini PC is equipped with an Intel Celeron J4125 quad-core Gemini Lake Refresh processor, 8GB RAM, and a 128GB SSD preloaded with an unnamed Linux OS (probably Debian 11) and Frigate Docker container. The solution can run over object detection at 100+ FPS when equipped with a Coral USB accelerator. Since the hardware is not exactly new, and we’ve covered it in detail in the past, even reviewing the earlier generation SBC with Celeron J4105 processor and Re_Computer enclosure, I’ll focus on the software, namely Frigate NVR in this post. Frigate is an open-source NVR program designed for Home Assistant with AI-powered object detection that runs as a Docker container and uses […]

September 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Topton N1 dual-bay NAS features AMD Athlon 3050e CPU, four Ethernet ports

Powered by an AMD Athlon Silver 3050e dual-core processor, Topton N1 (aka TP-N1) NAS comes with two SATA bays for 2.5-inch or 3.5-inch drives, as well as four gigabit Ethernet ports. The system can support up to 32GB RAM, relies on M.2 SSD storage for the OS, and can provide up to 40TB of data storage through the two SATA bays. It is also equipped with an HDMI output port, several USB 3.x/2.0 ports, as well as a 3.5mm audio jack. Topton N1 specifications: SoC – AMD Athlon Silver 3050e dual-core/quad-thread processor @ 1.4 / 2.8 GHz (Turbo) with Radeon Vega 3 graphics @ 1 GHz; TDP: 6W System Memory – Up to 32GB DDR4-2400 RAM via two SO-DIMM slots Storage M.2 2280 socket for a (PCIe 3.0) NVMe SSD 2x SATA III bay for 2.5-inch and 3.5-inch driver for a maximum of 40TB data storage (based on currently available […]

September 5, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

NVIDIA Jetson Xavier NX fanless embedded box PC features four HDMI input ports

NVIDIA Xavier NX embedded box pc four HDMI inputs

AAEON BOXER-8256AI is a fanless embedded box PC equipped with an NVIDIA Jetson Xavier NX system-on-module, offering four HDMI input ports – two Full HD, two 4K capable -, as well as two HDMI outputs for smart healthcare equipment, digital signage, and entertainment. The embedded computer comes with 8GB RAM and a 16GB flash provided by the NVIDIA module, supports M.2 NVMe and SATA storage, Gigabit Ethernet, plus optional WiFI, 4G, and 5G cellular connectivity through M.2 sockets. BOXER-8256AI specifications: SoM – NVIDIA Jetson Xavier NX with CPU – 6-core NVIDIA Carmel Armv8.2 64-bit CPU GPU – 384-core NVIDIA Volta GPU with 48 Tensor Cores AI accelerator – 2x NVDLA deep learning accelerators AI performance – Up to 21 TOPS at 15 Watts System Memory – 8GB LPDDR4x Storage – 16GB eMMC flash Storage – MicroSD Slot, M.2 NVMe SSD socket, SATA III port Display Interfaces – 2x HDMI […]

September 2, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Kubuntu Focus NX is a Linux mini PC with a Tiger Lake processor, two Thunderbolt 3 ports

Kubuntu Focus NX is a mini PC running Kubuntu Focus Linux operating system on an Intel Core i5-1135G7 or i7-1165G7 Tiger Lake processor, with up to 64GB RAM, support for NVMe and SATA storage, offering four HDMI/DisplayPort video outputs, two Thunderbolt 3 / USB-C ports, and three extra USB 3.2 Type-A ports. The mini PC also comes with decent networking and wireless connectivity thanks to a 2.5GbE port and an Intel AX601 module enabling WiFi 6 and Bluetooth 5.2. Mini PCs shipping with Linux by default are quite rare, and most that do are fairly expensive ones, so it’s nice to see a more affordable mid-range mini PC working with Kubuntu Focus out of the box. Kubuntu Focus NX mini PC specifications: SoC (one or the other) Intel Core i7-1165G7 Tiger Lake quad-core/8-thread processor @ 2.8 GHz / 4.7 GHz (Turbo) with 12MB cache, 96EU Intel Xe graphics ; TDP: […]

August 30, 2022August 29, 2022 by Ian W MORRISON (Linuxium) - 8 Comments

MeLE Quieter3C fanless mini PC review with Ubuntu 22.04, Windows 11

MeLE’s newly launched Quieter3C is an update to their earlier Quieter3Q product which replaces one of the Type-A USB ports with a Type-C USB port and includes both power delivery and video display output, together with changing one of the HDMI ports to a mini DisplayPort. MeLE kindly sent one for review and given these are the only differences I’m only going to take a cursory look at performance benchmarks together with looking at these new features. MeLE Quieter3C hardware overview The MeLE Quieter3C is physically the same size as the Quieter3Q and consists of a 131 x 81 x 18.3mm (5.16 x 3.19 x 0.72 inches) rectangular plastic case with a metal base plate. The top half of the case has the characteristic fine grooves that mimic the fins of a heat spreader and is made of plastic rather than metal to allow reception to the WiFi antennas as […]