networking News - Page 26 of 39 - CNX Software

August 30, 2021October 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Linux 5.14 Release – Main changes, Arm, MIPS, and RISC-V architectures

Linus Torvalds has just announced Linux 5.14 release which happens to almost coincide with the anniversary of the initial announcement of the “small” project on August 25, 1991, about 30 years ago. Here’s Linux 5.14’s announcement: So I realize you must all still be busy with all the galas and fancy balls and all the other 30th anniversary events, but at some point you must be getting tired of the constant glitz, the fireworks, and the champagne. That ball gown or tailcoat isn’t the most comfortable thing, either. The celebrations will go on for a few more weeks yet, but you all may just need a breather from them. And when that happens, I have just the thing for you – a new kernel release to test and enjoy. Because 5.14 is out there, just waiting for you to kick the tires and remind yourself what all the festivities are […]

August 27, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

AAEON FWS-2280 is an Elkhart Lake network appliance for SD-WAN, UTM, Firewall, VPN…

AAEON FWS-2280 Elkhart Lake network appliance

AAEON FWS-2280 is a Linux network appliance based on an Intel Elkhart Lake Atom x6000E, Celeron, or Pentium processor, with up to 32GB RAM, with 5 wired interfaces, supports for wireless expansion. The system is designed to power network applications including UTM (Unified threat management ), firewall, SD-WAN (Software-defined Wide Area Network), VPN, and more. AAEON FWS-2280 specifications: SoC – Intel Elkhart Lake dual-core or quad-core processor Intel UHD Graphics, defaulting to the 10W Intel Celeron J6412 quad-core processor @ 2.0/2.6 GHz System Memory – 1x 260-pin DDR4 SO-DIMM @ 3200MHz up to 32GB Storage – SATA III port (2.5-inch SATA bay), mSATA slot Video Output – HDMI Networking 4x Gigabit Ethernet RJ45 ports via Intel i211 controllers 1x SFP cage via Intel i210 controller Optional wireless connectivity (4G, 5G, WiFi, Bluetooth, etc…) via mini PCIe and M.2 sockets, plus 5x antenna holes USB – 2x USB 2.0 port Expansion […]

August 25, 2021August 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

SolidRun LX2162A SOM packs 16 Cortex-A72 cores, 32GB DDR4 onto a 58x48mm module

SolidRun LX2162A SOM is a compact (58x48mm) system-on-module based on NXP LX2162A 16-core Cortex-A72 networking processor and equipped with up to 32GB DDR4 RAM that’s 25% of the size of the company’s earlier COM Express Type 7 computer-on-module based on NXP LX2160A 16-core Arm Cortex A72 communication processor and found in ClearFog CX LX2K networking board. The much smaller size has been made possible by replacing the SO-DIMM sockets with soldered RAM, and switching from LX2160A to LX2162A SoC with similar features, but offered in a 23x23mm package that is nearly one quarter the size thanks to a reduction of the number of SerDes and PCIe interfaces, and manufacturing with a 16nm FinFET process technology. LX2162A SOM specifications: SoC – NXP Layerscape LX2162A communication processor with 16x Cortex A72 cores clocked at up to 2.0 GHz (option for the 12-core LX2122A, or 8-core LX2182A) Memory – Up to 32GB DDR4 […]

August 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Qualcomm IPQ4019 802.11ac Wave 2 WiFi system-on-module comes with Dual Gigabit Ethernet baseboard

Wallys Communication has introduced their lowest cost networking platform with the DR4019S board equipped with two Gigabit Ethernet ports, as well as a Qualcomm IPQ4019 802.11ac Wave 2 WiFi system-on-module. The module comes with 32MB NOR flash, and 256MB DDR memory and targets applications ranging from security surveillance to commercial radio coverage to hotel wireless applications, or even forest fire protection engineering. DR4019S board specifications: SoC – Qualcomm IPQ4019 quad-core Arm Cortex A7 at 716.8 MHz System Memory – 256MB DDR Storage – 32MB NOR flash Connectivity 2x Gigabit Ethernet ports 802.11b/g/n/ac Wave 2 WiFi 5 with 2x 5G MMCX connectors, 2x 2.4G MMCX connectors (but we can only see one or two of those on the provided photo) USB – 1x USB 3./2.0 port Misc – Debug UART header Power Supply – 12V via DC jack Power Consumption – 9.6W (max) Dimensions – 65 x 35 x 16mm Temperature […]

August 19, 2021August 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Banana Pi BPI-M2S Amlogic A311D SBC comes with dual GbE, HDMI & MIPI interfaces

There’s at least one more Amlogic A311D SBC coming our way with Banana Pi BPI-M2S equipped with 4GB RAM, 16GB eMMC flash, as well as two Gigabit Ethernet ports, combines with video interfaces that include HDMI, MIPI DSI & CSI, as well as two USB ports. This news comes just a few after we wrote about Geniatech DB10 AI development board based on Amlogic A311D hexa-core Cortex-A73/A53 processor and noted there were few platforms based on the SoC, apart from Khadas VIM3 SBC, and a few others. Banana Pi BPI-M2S SBC specifications: SoC – Amlogic A311D hexa-core processor with 4x Arm Cortex-A73 cores, 2x Arm Cortex-A53 cores, Arm Mali-G52 MP4 (6EE) GPU with OpenGL ES 3.2, Vulkan 1.0 and OpenCL 2.0 support, 5 TOPS NPU System Memory – 4GB LPDDR4 Storage – 16GB eMMC flash (option up to 128GB), MicroSD card slot Video interfaces HDMI 2.1 output up to 4Kp60 […]

August 17, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Raspberry Pi 4 gets IEEE1588 Precision Time Protocol (PTP) with Real-Time HAT

Raspberrry Pi 4 PTP protocol with the real-time HAT

InnoRoute Real-Time HAT adds IEEE1588 Precision Time Protocol (PTP) to Raspberry Pi 4/3 via a Xilinx Artix-7 FPGA and three Gigabit Ethernet ports. The Precision Time Protocol (PTP) is used to very accurately synchronize clocks throughout a computer network to enable measurement and control systems. It is often found in embedded microcontrollers or processors from Texas Instruments, STMicro, and more recently, in Intel Elkhart Lake & Tiger Lake H processors. It can notably be used for Time-Sensitive Networking (TSN) and Audio Video Bridging (AVB). InnoRoute Real-time HAT specifications & key features: FPGA- Xilinx Artik-7 FPGA Some RAM Networking Gigabit Ethernet port 0 with IEEE1588/TSN signaling Gigabit Ethernet port 1 with input from Raspberry Pi 4 Gigabit Ethernet port 2 with PoE, without TSN Host interface – 40-pin Raspberry Pi header mostly for SPI and I2C interfaces used for configuration. Misc – 3x LEDs, JTAG and PMod connectors, EEPROM (for Raspberry […]

July 29, 2021July 29, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

25-45W Intel Tiger Lake-H Xeon, Core, and Celeron embedded processors coming soon

While doing some research, I noticed an Intel Core i7-11850HE “Tiger Lake-H” processor on the OpenVino Toolkit website. Parts that end with “E” are usually processors designed for the embedded market. I had never heard about the Tiger Lake-H embedded family, so I looked for “i7-11850HE” processor, and it’s not in Intel Ark, or much anywhere else except on a page in Google Cache, about a COM-HPC module “with the 11th Gen Intel® Xeon® W-11000E Series, Core™ vPro® and Celeron® processors (formerly Tiger Lake-H) for FuSa application”. There we have a list of Xeon, Core, and Celeron 11th generation processors that I don’t think have ever been announced: Intel Celeron 6600HE dual-core processor @ 2.6GHz with 8MB L3 Cache, 35W TDP Intel Core i3-11100HE processor with 4 cores / 8 threads @ 2.4GHz (up to 4.4GHz in Turbo Boost) with 8MB L3 Cache, 45/35W cTDP Intel Core vPRO i5-11500HE processor […]

July 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

UP Connect Plus adds 5G support, 3 GbE ports to UP Core Plus, UP Xtreme SBCs

AAEON UP Connect Plus is a carrier board with three Gigabit Ethernet (GbE) ports, and an M.2 slot plus a micro SIM card socket adding support for 5G cellular connectivity to the company’s Appolo Lake-based UP Core Plus and Whiskey Lake-powered UP Xtreme single board computers. UP Connect Plus specifications: Connectivity 3 Gigabit Ethernet RJ45 ports in two configurations: 3x Intel Ethernet Controller I211-AT 3x Intel Ethernet Controller I210-IT with wide temperature and TSN (Time-sensitive Networking) 5G cellular – M.2 3042/3052 colay socket with micro-SIM card port to support 4G/5G modules USB – 1x USB 3.0 Type-A port for UP Core Plus only PCIe – 1x 2 channel PCIe switch SBC connectors – 2x 100-pin high-speed docking connectors Power Supply – 12V/5V from the main board Power Consumption – Approximately 36 to 40 Watts with UP Core Plus + UP Connect Plus Dimensions – 90 mm x 56 mm Temperature […]