orange pi News - Page 3 of 22 - CNX Software

December 4, 2023December 4, 2023 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Orange Pi AIPro SBC features a 20 TOPS Huawei Ascend AI SoC

Orange Pi AIPro is a new single board computer for AI applications that features a new (and unnamed) Huawei Ascend AI quad-core 64-bit processor delivering up to 20 TOPS (INT8) or 8 TOPS (FP16) of AI inference performance. The SBC comes with up to 16GB LPDDR4X and a 512Mbit SPI flash but also supports other storage options such as a microSD card, an eMMC flash module, and/or an M.2 NVMe or SATA SSD. The board also features two HDMI 2.0 ports, one MIPI DSI connector, and an AV port for video output, two MIPI CSI camera interfaces, Gigabit Ethernet and WiFi 5 connectivity, a few USB ports, and a 40-pin GPIO header for expansion. Orange Pi AIPro specifications: SoC – Huawei Ascend quad-core 64-bit (I’d assume RISC-V) processor delivering up to 20 TOPS (INT8) or 8TOPS (FP16) AI performance and equipped with an unnamed 3D GPU System Memory – 8GB […]

October 30, 2023January 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux 6.6 LTS release – Highlights, Arm, RISC-V and MIPS architectures

The Linux 6.6 release has just been announced by Linus Torvalds on the Linux Kernel Mailing List (LKML): So this last week has been pretty calm, and I have absolutely no excuses to delay the v6.6 release any more, so here it is. There’s a random smattering of fixes all over, and apart from some bigger fixes to the r8152 driver, it’s all fairly small. Below is the shortlog for last week for anybody who really wants to get a flavor of the details. It’s short enough to scroll through. This obviously means that the merge window for 6.7 opens tomorrow, and I appreciate how many early pull requests I have lined up, with 40+ ready to go. That will make it a bit easier for me to deal with it, since I’ll be on the road for the first week of the merge window. Linus About two months ago, […]

October 13, 2023October 13, 2023 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Orange Pi 5, 5B, and 5 Plus SBCs are now offered with 32GB RAM

Rockchip RK3588 SoC has long been advertised as supporting up to 32GB RAM, but the higher RAM capacity was mostly vaporware until Firefly introduced versions of their RK3588 boards and modules with 32GB RAM at the beginning of the summer. Orange Pi has now unveiled its own 32GB RAM versions of the Orange Pi 5, Orange Pi 5B, and Orange Pi 5 Plus single board computers powered by the Rockchip RK3588S or RK3588 octa-core Cortex- A76/A55 SoC. Besides the higher RAM capacity, nothing else has changed and for reference, here are the Orange Pi 5 Plus 32GB specifications: Orange Pi 5 Plus specifications: SoC – Rockchip RK3588 CPU – Octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, 4x Cortex-A55 cores @ up to 1.8 GHz Arm Mali-G610 MP4 GPU with support for OpenGL ES1.1/2.0/3.2, OpenCL 2.2, and Vulkan 1.2 6 TOPS AI accelerator with support for INT4/INT8/INT16/FP16 […]

September 9, 2023September 12, 2023 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Orange Pi Zero 2W – A Raspberry Pi Zero 2W alternative with up to 4GB RAM

As its name implies the Orange Pi Zero 2W is an alternative to the Raspberry Pi Zero 2W with basically the same features and form factor, but equipped with a slightly more powerful Allwinner H618 quad-core Cortex-A53 clocked at 1.5 GHz, and more RAM options from 1GB to 4GB. The new Orange Pi board comes with a mini HDMI port, two USB-C ports, WiFi 5 and Bluetooth 5.0 wireless module, a microSD card for the OS, a 16MB SPI flash for the bootloader, the usual 40-pin Raspberry Pi GPIO header, and a 24-pin “function” connector used for expansion boards and located where the camera connector is on the Pi Zero 2W. Orange Pi Zero 2W specifications: SoC – Allwinner H618 quad-core Arm Cortex-A53 processor @ up to 1.5GHz with 1MB L2 cache and Arm Mali-G31 MP2 GPU with support for OpenGL ES 1.0/2.0/3.2, OpenCL 2.0, Vulkan 1.1 System Memory – […]

August 29, 2023August 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Orange Pi Compute Module 4 – A low-cost Rockchip RK3566-powered alternative to Raspberry Pi CM4

Orange Pi Compute Module 4 is a system-on-module mechanically and electrically compatible with the Raspberry Pi CM4, but powered by a Rockchip RK3566 quad-core Arm Cortex-A55 AI processor just like the Radxa CM3 introduced a few years ago, or more recently the Banana Pi BPI-CM2 (RK3568). The new module, also called Orange Pi CM4 for shorts, comes with 1GB to 8GB RAM, 8GB to 128GB eMMC flash, and an optional 128/256MBit SPI flash, as well as a Gigabit Ethernet PHY and on-board WiFi 5 and Bluetooth 5.0. It comes with the two 100-pin high-density connectors found on the Raspberry Pi CM4, and a smaller 24-pin connector for extra I/Os. Orange Pi Compute Module 4 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 2EE GPU, 0.8 TOPS AI accelerator, 4Kp60 H.265/H.264/VP9 video decoding, 1080p100f H.265/H.264 video encoding System Memory – 1GB, 2GB, 4GB, or […]

August 5, 2023August 7, 2023 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Orange Pi 3B – A Rockchip RK3566 SBC with an M.2 NVMe/SATA SSD socket, up to 8GB RAM

Orange Pi 3B is a new Rockchip RK3566 SBC that’s like a supercharged Raspberry Pi 3B board with the same form factor, but with a faster processor, up to 8GB RAM, and support for multiple storage options with a microSD card slot, an eMMC flash socket, an M.2 Key-M socket for NVMe (PCIe 2.1) or SATA III SSDs, as well as an SPI flash that should enable features like network boot. The board also features HDMI 2.0 and eDP display intefaces, a Gigabit Ethernet port, a WiFI 5 and Bluetooth 5.0 wireless module, four USB ports, MIPI DSI and CSI connector, and the 40-pin Raspberry Pi GPIO header. It’s powered through a USB-C port taking 5V instead of the micro USB port found in the Raspberry Pi 3B. Orange Pi 3B specifications: SoC – Rockchip RK3566 CPU – Quad-core Cortex-A55 processor @ up to 1.8 GHz GPU – Arm Mali-G52 […]

July 3, 2023July 3, 2023 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

Orange Pi Zero 3 Allwinner H618 SBC ships with up to 4GB RAM

The Orange Pi Zero 3 is a compact Allwinner H618 quad-core Arm Cortex-A53 SBC with 1GB to 4GB RAM, 16MB SPI flash, micro HDMI output, Gigabit Ethernet, WiFi 5 and Bluetooth 5.0, a USB 2.0 port, and two headers for expansion. It provides an update to the Allwinner H616-powered Orange Pi Zero 2 SBC quadrupling the maximum memory to 4GB and embedding a larger SPI flash. The new board basically offers the same ports but in a different layout and a slightly smaller form factor. Orange Pi Zero 3 specifications: SoC – Allwinner H618 quad-core Arm Cortex-A53 processor @ up to 1.5GHz with 1MB L2 cache and Arm Mali-G31 MP2 GPU with support for OpenGL ES 1.0/2.0/3.2, OpenCL 2.0, Vulkan 1.1 System Memory – 1GB, 1.5GB, 2GB, or 4GB LPDDR4 Storage – 16MB SPI flash, microSD card socket Video Output Micro HDMI 2.0 up to 4Kp60 Video composite (CVBS) via […]

June 14, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Orange Pi 5/5B SBC gets a fanless aluminum enclosure

Orange Pi 5 and 5B are affordable single board computers based on Rockchip RK3588S processor, but so far they did not have a fanless enclosure nor an easy way to add a heatsink leading some to create an ICE Tower cooling fan for the boards. But Orange Pi has recently launched an aluminum enclosure for $12.99 on Aliexpress(or $25 on Amazon) for both models that should help with cooling and protect the hardware from dust. But note that it does not work with the Rockchip RK3588-powered Orange Pi 5 Plus SBC since its dimensions are different. The Orange Pi 5 fanless enclosure is made of aluminum alloy, measures 105.9 x 68.7 x 27mm, and weighs 126 grams with all ports accessible from the outside, except for the 26-pin header and the 3-pin UART header. The company also included a power button to cleanly shut down the system. We’ve given plenty […]