radxa News - Page 8 of 13 - CNX Software

November 19, 2020November 19, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Box86 is an x86 Emulator for Raspberry Pi and other 32-bit Arm platforms

Last week, we wrote about Raspberry Pi 4 Vulkan project status and future plans, and one person commented they are currently trying to get dxvk to work Box86, and that CNX Software should write about the latter. Cool, but what does that mean? dxvk is an open-source Vulkan-based implementation of D3D9, D3D10, and D3D11 for Linux, and Box86 is a Linux userspace x86 emulator that works on 32-bit Arm targets like the Raspberry Pi SBC. Nice, and I remember I ran x86 Linux and Windows on Raspberry Pi a few years ago using a closed-source commercial program called Exagear, but having an open-source solution is even better. That means 64-bit Arm is not supported at all, and Box86 can not even be built for Aarch64 targets. Since many x86 games require OpenGL, as opposed to OpenGL ES, Box86 works best in conjunction with gl4es. By installing Box86 on Raspberry Pi […]

November 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Rock Pi 4B or Raspberry Pi 4 based mini PC runs RISC OS Cloverleaf (Crowdfunding)

First released in 1987 by Acorn Computer Ltd, RISC OS was the first operating system designed to run on ARM processors, and specifically on the company’s Archimedes personal computer. I don’t think I had ever heard about the operating systems until it was ported to the Raspberry Pi SBC by RISC OS Open Ltd (aka ROOL) who manage the publication of RISC OS source code. But there’s also a separate project called RISC OS Cloverleaf which aims to further develop the open-source operating systems, and just launched a Kickstarter campaign to fund software development, and they also offer two mini PCs running RISC OS Cloverleaf with namely Cloverleaf Puma powered by a Rock Pi 4B SBC, and Cloverleaf Kitten featuring a Raspberry Pi 4 board. Cloverleaf Puma / Kitten key features and specifications: SBC Cloverleaf Kitten – Raspberry Pi 4 with Broadcom BCM2711 SoC, 4GB DDR4 RAM Cloverleaf Puma – […]

November 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Giveaway Week 2020 winners announced

CNX Software’s “Giveaway week 2020” took place last week with 7 different prizes including three MINIX accessories (USB-C hubs and USD PD charger), M5Stack Atom Echo ESP32 based programmable speaker, Miniware DT71 smart tweezers, and two SBC’s namely RockPi 4C and Ryzen Embedded based DFI GHF51. All people had to enter was to leave a comment with the country to which the parcel would have to be sent. With the help of random.org, we now have selected and confirmed winners which all happen to come from the US or Europe this time around: MINIX NEO Storage Plus USB-C Hub with 480GB SSD – Marc, USA Miniware DT71 Smart Tweezers – xdcc_master, GERMANY MINIX NEO C-G USB-C Multiport Adapter – Barnaby, UK RockPi 4C SBC – Garrett, USA M5Stack Atom Echo ESP32 Speaker – Venet, ITALY MINIX NEO P2 100W USB-C Charger – Michal, SLOVAKIA DFI GHF51 Ryzen Embedded SBC – […]

November 5, 2020November 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 321 Comments

Giveaway Week – RockPi 4C SBC

The first, but not last, SBC of Giveaway Week 2020 is RockPi 4C single board computer equipped with a Rockchip RK3399 processor coupled with 4GB RAM, and featuring HDMI and DisplayPort for dual 4K monitor setups, as well as Gigabit Ethernet, WiFI 5, Bluetooth, USB 3.0/2.0 ports, etc… The board closely follows Raspberry Pi 4 form factor, so without thinking too much about it I thought I could just use it with CrowPi2 Raspberry Pi 4 laptop. However due to small mechanical differences, and a different position of the processor impacting cooling, I quickly realized this would not work. Since I did not have time to review yet another RK3399 SBC, I thought I might as well as give it away, as I’m sure somebody will find a good use for it. Note the board does not come with any accessories, so you’ll have to get a MicroSD card, USB-C […]

October 12, 2020October 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Linux 5.9 Release – Main Changes, Arm, MIPS & RISC-V Architectures

Linus Torvalds has just announced the release of Linux 5.9 on lkml: Ok, so I’ll be honest – I had hoped for quite a bit fewer changes this last week, but at the same time there doesn’t really seem to be anything particularly scary in here. It’s just more commits and more lines changed than I would have wished for. The bulk of this is the networking fixes that I already mentioned as being pending in the rc8 release notes last weekend. In fact, about half the patch (and probably more of the number of commits) is from the networking stuff (both drivers and elsewhere). Outside of that, the most visible thing is a reinstatement of the fbdev amba-clcd driver – that’s a noticeable patch, but it’s basically just mainly a revert. The rest is really really tiny (mostly some other minor driver updates, but some filesystem and architecture fixes […]

October 2, 2020October 2, 2020 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Windows 10 capable Rock Pi X SBC Launched for $59 and Up

Radxa unveiled Rock Pi X intel SBC powered by an Intel Atom x5-Z8350 processor over a year ago with a starting price of just $39 making one of the cheapest Windows 10 single board computer together with Atomic Pi, but the latter is not super convenient to use. What’s new is that you can now buy Rock Pi X SBC, but not quite for $39 since the board has been redesigned, and instead, you’ll find the 4GB RAM/32GB eMMC flash model (Rock Pi X B4E32) for $75 on Seeed Studio, but if you can do with 2GB RAM and 16GB flash storage, AllNetChina has stock for $59 plus shipping. Those are the so-called model B boards with WiFi and Bluetooth, as well as support for an optional PoE module. Rock Pi X model B specifications: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad-core processor @ 1.44 GHz / 1.92 GHz […]

September 28, 2020September 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Tiny Rock Pi S SBC gets PoE & audio HAT add-on board

Powered by a Rockchip RK3308 quad-core Cortex-A35 processor, Radxa Rock Pi S single board computer was launched with specifications listing PoE support via an add-on board. Just one little problem though: it was not available for sale. The good news is that Radxa has now launched a PoE HAT for the Linux SBC adding support for 802.3af PoE up to 10W input, making it one of the smallest single board computers with PoE support in the world, and adding audio features with a 3.5mm audio jack, and an FPC connector for a microphone array. It can be purchased on Seeed Studio for $13.00. Here are the specifications of the complete solution with Rock Pi S SBC and PoE HAT: SoC – Rockchip RK3308 quad-core Arm Cortex-A35 processor @ up to 1.3 GHz with built-in Voice Activity Detector (VAD) System Memory – 512MB RAM Storage – 1GB SD NAND flash, MicroSD […]

September 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AAWireless Enables Wireless Android Auto on Android 9.0+ Smartphones (Crowdfunding)

Android 11 was just released yesterday with wireless Android Auto support removing the need to use a cable between your phone and a car running Android Auto. That’s great if you have a phone that got upgraded to Android 11, but what about people with older smartphones or people equipped with a wired Android Auto infotainment system? AAWireless offers a solution for phones running Android 9.0 or greater as a plug & play USB device that allows the use of a WiFi connection instead of a USB cable. Emil Borconi-Szedressy started the project in 2018 with the AAGateway app allowing you to use an auxiliary (slave) device to connect your existing Android Auto compatible car to your phone (master) using a hotspot created on your phone. This is not ideal since should need a spare Android phone to run the slave device. AAWireless removes this need as Emil ported the […]