robotics News - Page 23 of 30 - CNX Software

November 7, 2019November 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

NVIDIA Jetson Xavier NX SoM Delivers up to 21 TOPS for AI Workloads at the Edge

NVIDIA has just announced Jetson Xavier NX system-on-module, with the company claiming it is the “world’s smallest, most powerful AI supercomputer for robotic and embedded computing devices at the edge” with a 70x45mm “Jetson Nano” form factor, and delivering either up to 14 TOPS at 10 Watts or 21 TOPS at 15 Watts. The company expects the module to be used in small commercial robots, drones, intelligent high-resolution sensors for factory logistics and production lines, optical inspection, network video recorders, portable medical devices, and other industrial IoT systems. Jetson Xavier NX specifications: SoC – NVIDIA Xavier with 6-core NVIDIA Carmel ARM v8.2 64-bit CPU, 6MB L2 + 4MB L3 caches, and a 384-core NVIDIA Volta GPU with 48 Tensor Cores, 2x NVDLA deep learning accelerators delivering up to 21 TOPS at 15 Watts System Memory – 8 GB 128-bit LPDDR4x @ 51.2GB/s Storage – 16 GB eMMC 5.1 flash Video […]

October 11, 2019October 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Intrinsyc Unveils Open-Q 845 µSOM and Snapdragon 845 Mini-ITX Development Kit

Intrinsyc introduced the first Qualcomm Snapdragon 845 hardware development platform last year with its Open-Q 845 HDK designed for OEMs and device makers. But the company has now just announced a solution for embedded systems and Internet of Things (IoT) products with Open-Q 845 micro system-on-module (µSOM) powered by the Snapdragon 845 octa-core processor, as well as a complete development kit featuring the module and a Mini-ITX baseboard. Open-Q845 µSOM Specifications: SoC – Qualcomm Snapdragon SDA845 octa-core processor with 4x Kryo 385 Gold cores @ 2.649GHz + 4x Kryo 385 Silver low-power cores @ 1.766GHz cores, Hexagon 685 DSP, Adreno 630 GPU with OpenGL ES 3.2 + AEP (Android Extension Pack), DX next, Vulkan 2, OpenCL 2.0 full profile System Memory – 4GB or 6GB dual-channel high-speed LPDDR4X SDRAM at 1866MHz Storage – 32GB or 64GB UFS Flash Storage Connectivity Wi-Fi 5 802.11a/b/g/n/ac 2.4/5Ghz 2×2 MU-MIMO (WCN3990) with 5 GHz […]

September 13, 2019September 13, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Raspberry Pi CM3+ based EagleEye Smart Camera Works with OpenCV and LabVIEW NI Vision

Raspberry Pi CM3 Industrial Smart Camera

We previously covered Q-Wave Systems’ Melon S3 board combining a Xilinx Spartan 3E FPGA with ESP8266, but the Thai company is back is a completely different product: EagleEye Smart Camera. The board is powered by Raspberry Pi Compute Module 3+ (CM3+) with 16GB or 32GB flash, and equipped with a 5 MP camera for machine vision and robotics applications. There are two version of the board Uno and Industrial with the latter adding 24V digital input and outputs, circuit protections and support for industrial temperature range. EagleEye smart camera key features & specifications: SoM – Raspberry Pi CM3+ with Broadcom BCM2837B0 quad core cortex-A53 processor, 1 GB RAM, and 16GB or 32 GB flash Camera – 5 MP OV5647 image sensor, CS/M12 lens holder + 4mm CS lens Video Output – mini HDMI port Networking – 10/100M Ethernet USB – 1x USB 2.0 host port up to 1.2A Expansion Uno […]

August 1, 2019 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

HuskyLens AI Camera & Display Board is Powered by Kendryte RISC-V Processor (Crowdfunding)

A couple of years ago, I reviewed JeVois-A33 computer vision camera powered by Allwinner A33 quad-core Cortex-A7 processor running Linux. The tiny camera would implement easy-to-use software for machine vision with features such as object detection, eye tracking, QR code and ArUco marker detection, and so on. The camera could handle the tasks at hand, but since it relied on purely software computer vision, there were lag for some of the demo applications including 500ms for single object detection, and up to 3 seconds for YOLO test with multiple object types using deep learning algorithms. That’s a bit slow for robotics project, and software solutions usually consume more than hardware accelerated ones. Since then, we’ve started to see low-cost SoC and hardware with dedicated hardware AI accelerators, and one of those is Kendryte K210 dual-core RISC-V processor with a built-in KPU Convolutional Neural Network (CNN) hardware accelerator and APU audio […]

July 24, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Waveshare Jetbot AI Kit for NVIDIA Jetson Nano Board Sells for $100 and Up

NVIDIA Jetson Nano developer kit was launched for $99 last March with impressive specifications for the price including one module with four Arm Cortex-A57 cores, a 128-core Maxwell GPU, and 4GB LPDDR4 RAM. The company also introduced Jetbot robot based on the new board, with all instructions available on Github, but until now you had to put some efforts to build it up as the fairly long list of parts had to be purchased or 3D printed separately. It’s now become easier, as Waveshare has started selling their Jetbot AI kit on Amazon for $122.99 without Jetson Nano, and $259.99 with, meaning you may be better off purchasing NVIDIA board separately for around $100, or you may purchase the complete kit directly on Waveshare website for $215.99 plus shipping, or $99.99 without the SBC. Jetbot AI kit content: Optional NVIDIA Jetson Nano SBC 64GB micro SD Card Metal box Camera […]

July 16, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arduino based Clover Platform Targets STEM Education in Vietnam

We’re already seen there’s an active maker community in South East Asia with products such as KidBright32 educational board in Thailand, and Singapore & Thailand based MakerAsia’s recent launch of the open-source KB-IDE for ESP32 targets. Vietnam based Clover Team also introduced a STEM platform for students late last year with hardware, an IDE, and a mobile application. The team has made three educational kits: Clover EDU Basic with Clover Master Board and basic modules Clover Car Robot with Clover Master Board, motor, motor driver module, line sensor, distance sensor, Bluetooth module Clover Inventor that includes all items from Clover EDU Basic and Clover Car Robot plus a WiFi module. The Master board is compatible with the Arduino UNO platform (software-wise) and comes with the following key features: Connectivity – Header for ESP8266 WiFi module Expansion – 4x RJ11 ports for input and output with color signs, and compatible with […]

June 29, 2019June 29, 2019 by Tiwalade Joanna Okedara - 9 Comments

Microchip SAMA5 based Giant Board Launched on Crowd Supply for $50 and Up

Earlier this year we gave you details about some new development board, most especially about the Giant board. A tiny single board computer that runs Linux on Arm Cortex-A5 processor. This super tiny single-board computer (SBC) is based on the Adafruit Feather form factor. Unlike its name, the giant board is actually a small microchip. And it packs an awful lot of power for its size. The news is that it has launched on Crowd Supply for $50 and up. In addition, the giant board implements the power of size, which makes it unique. It squeezes SBC into a package the size of a microcontroller board. This will in turn relax memory, storage, and processing constraints. Consequently allowing you to effectively work on your projects. Another thing to know about the Giant Board is that it runs full Debian Linux. Giving developers and users access to an endless number of […]

June 19, 2019 by Tiwalade Joanna Okedara - 2 Comments

DJI Launches RoboMaster S1 Education Robot

DJI is one of the world’s leading technology companies. They specialize in the manufacturing of high-end drones and other innovative and creative techs. Recently they announced the launch of their new product, Robomaster S1 education robot. The game-changing educational robot uses innovative hands-on learning, this makes it fun and smart. Furthermore, the new S1, which is a lot different from what DJI makes, is packed with a lot of features. This educational robot allows users to learn and understand science, math, physics, programming, and more. Although the official selling price of the S1 is $499, most resellers are expecting to sell it at a higher price. Resellers will sell it at about $699, which is a big difference from the official price. When CNX Software spoke to one of the resellers, they mentioned the reason for the high price, stating that “suppliers did not provide the RoboMaster S1’s cost” so […]