smart city News - Page 2 of 9 - CNX Software

July 1, 2025 by Debashis Das - No Comments

ADLINK SBC35-MTL – A 3.5-inch Intel Core Ultra SBC with up to 96GB DDR5, SBC-FM I/O expansion

ADLINK SBC35-MTL 3.5-inch SBC for high-performance edge AI applications is built around Intel Core Ultra (Meteor Lake) SoCs with integrated AI Boost NPU, and is designed to run real-time AI applications in a small footprint. The SBC supports up to 96GB DDR5 memory, 4K quad-display output (HDMI, DP, eDP, USB-C), dual 2.5GbE, and MIPI-CSI for AI cameras. Storage options include SATA and NVMe via M.2, with expansion through M.2 B-Key and E-Key. There is also ADLINK’s SBC-FM connector for additional I/O options. Other features include TPM 2.0, USB/serial I/O, wide 12–24V input, and a compact fanless design rated for 0°C to 60°C operation. ADLINK SBC35-MTL specifications: Meteor Lake SoC – Intel Core Ultra with either 15W (MTL-U) or 28W (MTL-H) TDP options 15W (MTL-U) Intel Core Ultra 5 125U 12-core (2P+8E+2LPE) processor @ 1.3 / 4.3 GHz with 12MB cache, Intel 4Xe LPG graphics @ 1.85 GHz, Intel AI Boost […]

June 26, 2025November 12, 2025 by Debashis Das - 1 Comment

RAKwireless Raspberry Pi CM4-based industrial gateway supports both MIOTY and LoRaWAN

WisGate Connect for MIOTY LoRaWAN gateway

The WisGate Connect for MIOTY is an industrial-grade hybrid IoT gateway with support for both MIOTY and LoRaWAN protocols. Built around the RAK7391 carrier board for Raspberry Pi CM4, it is designed for long-range IoT applications, including intelligent street lighting, waste management, environmental monitoring, and traffic flow control. In addition to dual-protocol (MIOTY and LoRaWAN) support, it features USB 2.0, USB 3.0, and a USB-C port for flashing, an HDMI output, and a UART header for debugging. Backhaul options include Wi-Fi, Ethernet, or an optional 4G LTE module. The gateway can be powered in two ways: a wide input voltage DC jack or terminal block, or optional PoE+. We first wrote about the MIOTY Standard back in April 2020. After that, in September 2021, we saw Silicon Labs introduce EFR32FG23 (FG23) and EFR32ZG23 (ZG23) SoCs with MIOTY support, but it’s been a while since we’ve covered products built around this standard. […]

June 11, 2025June 11, 2025 by Jean-Luc Aufranc (CNXSoft) - No Comments

Quectel KCM0A5S Wi-SUN FAN module targets large IoT deployments for Smart Cities and Smart Agriculture

Quectel KCM0A5S is a Wi-SUN FAN module based on Silicon Labs EFR32FG25 Arm Cortex-M33 Sub-GHz wireless MCU, designed for applications such as street lighting, precision agriculture, industrial IoT, smart meters, and Smart Cities. Wi-SUN (IEEE 802.15.4g) is an LPWAN (Low Power Wide Area Network) standard leveraging IPv6 mesh networking for large-scale IoT deployments in Smart Cities and Smart Agriculture. The KCM0A5S module specifically supports the Wi-SUN Field Area Network (FAN) 1.1 protocol and operates across the 470–928 MHz frequency range. The module can act as a leaf node, a router, or a border router when paired with a Linux host in RCP (Radio Co-Processor) mode. Quectel KCM0A5S specifications: Wireless SoC – Silicon Labs EFR32FG25 CPU core – Arm Cortex-M33 core @ 97.5 MHz with DSP instruction and floating-point unit for signal processing Memory – 256 KB RAM data memory Storage – About 2MB flash program memory Radio – Sub-GHz radio operation […]

June 3, 2025June 3, 2025 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Credit card-sized industrial Allwinner T113-i SBC operates in the -40 to 85°C temperature range

Ebyte ECB30-P4T13IA5ME8G-I is a credit card-sized industrial-grade SBC powered by an Allwinner T113-i Cortex-A7 SoC with 512MB DDR3 RAM and 8GB flash, all part of the company’s ECK30-T13IA5ME8G-I castellated system-on-module. The single board computer is also equipped with a microSD card slot, a gigabit Ethernet port, four USB 2.0 ports, a 3.5mm audio jack, a WiFi 4 module, and the usual 40-pin GPIO header that’s more or less compatible with the one found on Raspberry Pi SBCs. What’s different is the lack of HDMI output, and the board features an MIPI DSI connector instead. Ebyte ECB30-P4T13IA5ME8G-I specifications: System-on-Module – Ebyte ECK30-T13IA1GE8G-I SoC – Allwinner T113-i CPU Dual-core Arm Cortex-A7 clocked at up to 1.2 GHz 64-bit XuanTie C906 RISC-V real-time core DSP – HiFi4 VPU Video decoder – H.265 up to 4K @ 30 FPS, H.264 up to 4K @ 24 FPS, MPEG-1/2/4, JPEG, Xvid, Sorenson Spark up to 1080p60 […]

May 21, 2025May 21, 2025 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

VIA AI Transforma Model 1 – 3.5-inch fanless SBC features MediaTek Genio 700 AIoT SoC for Edge AI applications

VIA AI Transforma Model 1 is an edge AI platform powered by a MediaTek Genio 700 (MT8390) SoC with 4 TOPS of AI performance designed for industrial automation, smart cities, and more. The 3.5-inch fanless SBC is equipped with 8GB RAM and 16GB eMMC flash, and offers three display interfaces (HDMI, DP, MIPI DSI), a 4-lane MIPI CSI camera interface, gigabit Ethernet networking, M.2 sockets for wireless and cellular connectivity, several USB ports, a 40-pin GPIO header, and more. VIA AI Transforma Model 1 specifications: SoC – MediaTek Genio 700 (MT8390) CPU – Octa-core processor with 2x Cortex-A78 cores @ up to 2.2 GHz, 6x Cortex-A55 cores @ up to 2.0 GHz GPU – Arm Mali-G57 MC3 GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL ES 2.2, and Vulkan 1.0/1.1 APIs VPU Encoding up to 4Kp30 with H.265/HEVC or H.264 Decoding up to 4Kp75, AV1, VP9, HEVC, H.264 codecs supported […]

May 8, 2025May 8, 2025 by Debashis Das - No Comments

Intel Atom x7000RE fanless industrial box PC offers 10-year life cycle for factory automation

AAEON BOXER-6617-ASL is a rugged and compact fanless industrial box PC built around the Intel Atom x7000RE series of SoCs. It is designed for harsh industrial environments and has a wide operating temperature range (-20°C to 70°C) and a guaranteed 10-year product lifecycle making it a reliable long-term solution for factory automation and other embedded applications. The rugged embedded system supports up to 32GB DDR5 memory, dual HDMI, dual 2.5GbE LAN ports, and extensive I/O including six serial ports, USB 3.2 and 2.0, DIO, and audio. Storage options include M.2 NVMe and 2.5″ SATA, with additional expansion through M.2 E-Key (Wi-Fi) and B-Key (5G/LTE) sockets. It also has a wide 9V–36V power input range, circuit protection, and strong shock/vibration resistance. The computer also features six RS-232/422/485 serial ports and DIO via DB9 connectors AAEON BOXER-6617-ASL Specifications: Amston Lake Series SoC options (one or the other) Intel Atom x7835RE octa-core processor […]

March 19, 2025 by Debashis Das - No Comments

Panasonic PAN B511-1C Bluetooth 6.0 and 802.15.4 module features castellated holes and LGA footprint

Panasonic industry has recently introduced the PAN B511-1C Bluetooth 6.0 and 802.15.4 module based on the Nordic Semi nRF54L15 SoC and designed for ultra-low-power wireless communication. The compact module integrates a chip antenna, 32MBit flash memory, two Crystals, and the Nordic nRF54L51 which provides a 128 MHz Arm Cortex-M33 microcontroller with Bluetooth 6.0 (LE), Thread, Zigbee, and Matter, along with multiple peripherals such as SPI, UART, I2S, PWM, and ADC. The PAN B511-1C also implements security features to support secure boot, secure firmware updates, cryptographic acceleration, and tamper detection, making it suitable for a range of IoT, industrial automation, smart home, medical (wearables), and battery-powered applications. PAN B511-1C module specification: SoC – Nordic Semiconductor nRF54L15 MCU cores Arm Cortex-M33 with Arm TrustZone @ 128MHz RISC-V coprocessor for software-defined peripheral Memory – 256KB SRAM Storage – 1.5MB non-volatile memory Wireless Bluetooth 6.0 Data rates – 2Mbps, 1Mbps, 500kbps, 125kbps Features AoA / […]

March 17, 2025March 17, 2025 by Debashis Das - No Comments

IMDT V2N Renesas RZ/V2N SoM powers Edge AI SBC with HDMI, MIPI DSI, dual GbE, WiFi 4, and more

IMD Technologies has recently introduced the IMDT V2N SoM based on the newly launched Renesas RZ/V2N low-power AI MPU and its SBC carrier board designed for robotics, smart cities, industrial automation, and IoT applications. The SoM ships with 8GB RAM and 32GB eMMC flash, and supports various interfaces through B2B connectors including two 4-lane MIPI CSI-2 interfaces, a MIPI DSI display interface, and more. The SBC supports MIPI DSI or HDMI video output, dual GbE, WiFi 4 and Bluetooth 5.2, as well as expansion capabilities through M.2 sockets. IMDT V2N SBC specifications: IMDT V2N SoM SoC – Renesas RZ/V2N Application Processor – Quad-core Arm Cortex-A55 @ 1.8 GHz (0.9V) / 1.1 GHz (0.8V) L1 cache – 32KB I-cache (with parity) + 32KB D-cache (with ECC) per core L3 cache – 1MB (with ECC, max frequency 1.26 GHz) Neon, FPU, MMU, and cryptographic extension (for security models) Armv8-A architecture System Manager […]