Review of ITEAD Studio IP66 Waterproof Case for Sonoff Wireless Switches (and Other Boards)

ITEAD Studio recently launched a waterproof enclosure for $2.90 (now at still a decent $3.90), rated IP66, for their family of Sonoff wireless switches, so you can safely use them outdoors protected from rain and dust. The company sent me one sample together with Sonoff RF switch supporting WiFi and 433MHz RF connectivity so that I can test the case, and write a review describing my experience. I’ll focus on the waterproof since this is the main focus of this review, and beside Sonoff RF, you can also use Sonoff basic, various other Sonoff boards (POW, TH10/T16), and even other development boards as we’ll seen below. I’ll be using the stock firmware with eWelink app, but if you prefer alternative firmware like ESPurna or Sonoff-Tasmota, you may want to flash it to your Sonoff now. The waterproog case has two parts, a rubber cord, two waterproof PG7 connectors, and four […]

Sonoff Wireless Switch Family Gets a $3 IP66 Waterproof Enclosure

ESP8266 powered ITEAD Studio Sonoff wireless switches have been popular because they are inexpensive, highly customizable thanks to work from the community leading to open source projects such as ESPurna and Sonoff-Tasmota, and come fully packaged so you don’t need to make your own case for it. That works well for indoor projects, but if you needed to control outdoors lights, gate, water pump, etc… you had to protect the device from humidity/rain. That may not be necessary anymore as the company is now selling Sonoff Basic with an IP66 waterproof enclosure for $7.75, or the case only for $2.90.Sonoff waterproof case: Ingress Protection Rating – IP66 Material – PC V0 Dimensions – 132.2 x 68.7 x 50.1mm (See details) Weight – 145.0g IP66 rating is not suitable for prolonged immersion, but it should be good to protect against rain or high humidity. The box ships with two standardized PG7 […]

Review of Sonoff B1 Smart RGB Light Bulb – Part 2: Sonoff-Tasmota Firmware

I’ve already reviewed Sonoff B1 light bulb using the stock firmware combined eWelink app for Android, and as promised in the first part of the review, I’ve also tested the ESP8285 based WiFi light bulb with Sonoff-Tasmota open source firmware, and report my findings in this new post. Before we can play with the new firmware, we need to install it, and I’ve just explained how to upgrade Sonoff devices to Sonoff-Tasmota firmware either using some soldering skills and a USB to serial board, or some network configuration skills and perform an OTA update using ITEAD Studio/eWelink original firmware update mechanism. So for this part of the review, I’ll assume we have just freshly update the light bulb with Sonoff-Tasmota using the binary images released by the developer. First, you’ll need to find the IP address of the light bulb with your router or tools like nmap or arp, and […]

Upgrading Sonoff Stock Firmware to Sonoff-Tasmota – USB to Serial, and OTA Update Methods

This post was initially supposed to be part 2 of Sonoff B1 light bulb review, where I would have explained how easy it was to use OTA mechanism to update to Sonoff-Tasmota open source firmware, and shortly show about its features and capabilities. However, it took me over 10 hours to make that work, mostly due to misunderstand in the documentation, and time spent to configure routers. I also failed the first time with Sonoff B1, so I used the serial console method, and instead managed to use SonOTA method with Sonoff POW switching from stock firmware to Sonoff-Tasmota without having to solder or tear down anything. Updating software with a USB to Serial Board Using a USB to serial board is the most common method to switch from stock firmware to open source firmware such as ESPurna or Sonoff-Tasmota in Sonoff devices or other ESP8266 based devices. It’s quite […]

Sonoff B1 Smart Light Bulb Review – Part 1 : eWeLink Android App and Teardown

ITEAD Studio has a popular family of home automation devices call Sonoff with WiFi switches, smart sockets, RF to WiFi bridges and so on. All WiFi devices are based on Espressif ESP8266 or ESP8285, and while the company provide a stock firmware working with eWelink app, at least two communities have formed around Sonoff and other similar devices providing two open source firmware alternatives: ESPurna and Sonoff-Tasmota. The company has sent me Sonoff B1 smart RGB light bulb for review. Today, I’ll check out the light with eWelink app for Android, and do a teardown, before trying one of the open source firmware in the second part of the review. Sonoff B1 Unboxing Some Chinese products come in a blank cardboard boxes, but Sonoff’s light bulb comes with in a nice looking retail package that would look good on store’s shelves. One of the side lists the specifications with an […]

Review of Sonoff RF Bridge, Sonoff 4ch Pro, and Sonoff POW with Sonoff-Tasmota Firmware

Karl here. Today we are going to look at 2 new and one older Sonoff devices. Sonoff RF Bridge – $9.90 433MHz RF to WiFi Bridge Sonoff 4ch Pro – 4 Gang WiFi RF Smart Switch Sonoff POW – Wireless switch with power metering capabilities I spent very little time with the stock firmware on the device. I don’t like the fact that an Internet connection is needed, and I am not in control. As of the time of this writing I found the Ewelink was not configurable enough to meet my needs. There is one feature that is really nice that I could easily see keeping stock firmware. It is the Alexa Skill. It worked. I am also currently reviewing Vobot Smart Alarm Clock with Alexa integration and had no trouble controlling the Sonoff devices with Alexa. But unfortunately I am lazy and want everything automatic so I can’t […]

Sonoff Wireless Switches & Light Bulbs Now Work With Google Home

ITEAD Studio Sonoff wireless switches can be controlled by voice commands using Amazon Alexa or Google Home, but so far, the latter was only possible by emulating Belkin Wemo switch in alternative open source firmwares such as ESPurna or Sonoff-Tasmota. For people who don’t want to update the firmware themselves, and instead prefer to use the stock firmware with eWelink mobile app, the manufacturer has now announced support for Google Home, on top of the already supported Amazon Alexa service. The instructions are explained in details in ITEAD’s blog post, but basically, you need to start Google Home app in your mobile, select your Google Home device, go to Home Control to add Devices, select Smart We Link, login to eWelink with your username/phone number and password, name the devices you want to control and you’re done. You should now be able to control devices or rooms with voice commands […]

Sonoff G1 AC Powered Smart Power Switch Works Over 2G GSM/GPRS

Today, I’ve searched for AC powered wireless switched similar to Sonoff devices, but with ESP32 instead in order to get WiFi and Bluetooth, since the latter is better to use with a battery powered buttons. I did find a DC powered board, but no AC powered ones yet. However, as I visited ITEAD website to check if they had anything of the sort, I discovered they had a new model called Sonoff G1, similar to Sonoff TH16, but instead of using WiFi, you can use 2G GSM/GPRS to control the switch remotely. Sonoff G1 specifications: Wireless Module – ST86 quad band GSM/GPRS module GSM/GPRS connectivity GSM850, EGSM900, DCS1800 and PCS1900 MHz support GPRS multi-slot class 10, GPRS mobile station class B 1.8V, 3V  SIM card slot Transmit power: Class 4 (2W): GSM850, EGSM900; Class 1 (1W): DCS1800, PCS1900 Relay – Up to 16A (3000 Watts max) Terminals – 6 terminals […]

Exit mobile version
Memfault IoT and embedded debugging platform