texas instruments News - Page 15 of 16 - CNX Software

March 25, 2011March 25, 2011 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Temperature Data Logging with TI eZ430-Chronos Watch

I wanted to record 24-hour of temperature data with eZ430-Chronos devkit and draw the result in a spreadsheet to see how the temperature evolves during the day. Here are the instructions to do so. 1. Update firmware to Chronos Datalogger. In order to record temperature data in your eZ430-Chronos development kit, you’ll need to update the firmware to use Chronos Datalogger. First start the Chronos Control Center, click on the Wireless Update tab, click on browse to select the Chronos Datalogger firmware file matching your hardware. In my case, I selected C:\Program Files\Texas Instruments\eZ430-Chronos\Recovery\Chronos Watch\Applications\eZ430_Chronos_Datalogger_433MHz_1_5.txt. Then click on Update Chronos Watch. On the watch, press the # button several time to enter rFbSl mode and press the down button to start the wireless update. 2. Configure the watch for temperature logging. Now start Chronos Data Logger software, click on Start Access Point. On your watch, press the # button to […]

March 23, 2011April 6, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Archos Gen9 Tablets Coming in June 2011

During the investor conference on 18th March 2011, Archos announced they will release their Gen9 Android Tablets in June 2011 with 4 key differentiators compared to the competition: Plastic-overmolded stainless steel structure: Thinner, lighter and stronger tablet enclosure Better cost-effectiveness than competing solutions Patented techno used since Gen 7 in 2009 ARCHOS alone to use Hard Disks in tablets: Deep redesign of Android ARCHOS has a long experience in using HD’s for mobile devices Price: 250 GB HD = 32 GB Flash Memory ARCHOS 1st to use ARM Dual Core A9 @ 1.6 GHz Forefront competition limited to ARM Dual Core A9 @ 1GHz (iPad 2, Xoom All Gen 9 tablets targeted at 1.6 GHz All Gen 9 tablets targeted at 1.6 GHz New disruptive 3G modem solution for tablets Will allow ARCHOS to make headway into telcos Implemented in all Gen 9 tablets Patent pending Since Archos Gen8 were […]

March 22, 2011 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Texas Instruments eZ430-Chronos Wireless Watch Unboxing

I’ve just received the eZ430-Chronos development tool I ordered last week (after 2 working days) by Fedex. Today, I’ll just post some pictures of the kit and provide some descriptions. There is a woman jogging on the box because you can actually buy a chest strap to monitor your speed, heart beat and calories consumption. If you would like to purchase one (49 Euros), it is available at http://www.bm-innovations.com/index.php/shop_products.html. Apparently there are only 868MHz (EU) and 915MHz (USA) versions, and they do not sell the strap for the 433MHz (international) version as I have. The watch is normally turned off the first time you open the box, it’s just turned on on the picture because I used it before taking the pictures. The content of the box includes: eZ430-Chronos wireless watch eZ430 USB programming and debugging interface (Bottom left) CC1111 USB RF access point (Bottom right on top of the […]

March 17, 2011March 17, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Texas Instruments MSP430 Devkit Facebook Promotion

Texas Instruments is currently offering 50% discount on selected development kits for its Facebook Fans for purchase on TI eStore until stocks last. The two development kits are sold at 50% discount: EZ430-Chronos-433 – eZ430-Chronos Wireless Watch Development Tool, a highly integrated, wireless development system based for the CC430 in a sports watch. It may be used as a reference platform for watch systems, a personal display for personal area networks, or as a wireless sensor node for remote data collection. The original price is 49 USD, but it can be ordered for 24.50 USD (including shipping) with the promo code: FCB-sfVwiUYe EZ430-F2013 – MSP430 USB Stick Development Tool, a complete development system with detachable target board and USB emulator. Ideal for new users. The original price is 20 USD, but it can be ordered for 10 USD (including shipping) with the promo code: FCB-ZC7Y86yQ I’ve ordered the Wireless Watch […]

March 10, 2011July 29, 2012 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

QSeven Form Factor Embedded Boards by Seco

QSeven is a new standard (QSeven Specifications 1.20) that provides pinout, electromechanical description and implementation guidelines so that the main boards (with the MPU) be easily exchanged. So that you can a larger board with all connectors and a QSeven boards based on Intel icore, Atom or other processors based on ARM that simply fits into that larger board. The QSeven concept is defined as follows: Qseven Concept The Qseven concept is an off-the-shelf, multi vendor, Single-Board-Computer that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven modules have a standardized form factor of 70mm x 70mm and have specified pinouts based on the high speed MXM system connector that has a standardized pinout regardless of the vendor. The Qseven module provides the functional requirements for an embedded application. These functions include, but are not limited to, graphics, sound, mass […]

March 9, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Video Wall with Beagleboards and ffmpeg

There was a 6-Screen Video Wall at Embedded World 2011, powered by 6 Beagleboard xM (based on Texas Instruments OMAP 3 running @ 1Ghz – Cost: 149 USD / piece), connected vi Ethernet. In the video they explain that the system is running Linux Ångström and the video is played and synchronized over Ethernet with ffmpeg. After doing some research on how to do this, they are probably using omapfbplay with netsync enabled which you can compile as follows: NETSYNC=y OMAPFB=y make However, if you are using Linux Ångström, omapfbplay with netsync is enabled by default. This can also be done with the first version of Beagleboard (without Ethernet) via USB. They can also control each display independently and synchronize the mouse and keyboard thanks to Synergy. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting […]

February 8, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Texas Instruments OMAP 5 based on ARM Cortex A15 Core

Texas Instruments announced its new generation of mobile chips OMAP 5 based on the latest ARM core Cortex A15. Press release excerpt: DALLAS (Feb. 7, 2011) /PRNewswire/ — Texas Instruments Incorporated (TI) (NYSE: TXN) announced today the next generation of its popular OMAP™ family: the OMAP 5 mobile applications platform, which is positioned to transform how mobile devices, such as Smartphones, tablets and other mobile form factors are used, making them even more valuable in our daily lives. … The 28 nanometer OMAP 5 applications processors carry on the OMAP family tradition of delivering significant increases in performance and functionality, while lowering power consumption compared to their predecessors. Specifically, they offer up to 3x processing performance and five-fold 3D graphics improvement, yet provide a nearly 60 percent average power reduction compared to a sample user experience on the OMAP 4 platform. Additionally, the OMAP 5 platform’s software is designed for […]

January 7, 2011October 15, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

A Pico Projector and Android in a Light Bulb

seco_light_bulb_android_texas_instrument_omap

Seco, an Italian company, specialized in Embedded Systems development has developed a light bulb with a pico projector (DLP) that replaces your light bulb and project videos/pictures or anything you can think of on your wall. The product is supposedly 99% made with Texas Instruments chipsets, mainly Texas Instruments OMAP3530 processor (ARM Cortex A8) and it runs Android, WiFi, Bluetooth, inside a lamp. The maximum power consumption is 25 W (green bulb maximum power consumption). This is currently a prototype and could cost between 200 and 400 USD retail. A microphone and speaker is also available, so it could possibly be used with Skype. Have a look this really seems promising. Soon we may also ask: “What OS are you running in your light bulb ?” Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to […]