ttgo News - Page 5 of 6 - CNX Software

June 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

LILYGO Mini E-Paper Core combines ESP32 with 1.02-inch ePaper Display in 3D printed enclosure

LILYGO Mini E-Paper Core is another ESP32-based e-Paper display by LILYGO, but it’s a really tiny 1.02-inch e-Paper display housed in a 3D printed enclosure that reminds me of M5Stack Core with a 2-inch TFT LCD. The tiny low-power display also offers a MicroSD card socket, a reset button, a three-way user button, as well as headers for GPIOs, ADC, DAC, SPI, and more. LILYGO Mini E-Paper Core specifications: Wireless SiP – ESP32-PICO-D4 system-in-package with ESP32 dual-core processor, 4MB Flash, 2.4 GHz WIFi 4 & Bluetooth connectivity Storage – MicroSD card socket Display – 1.02-inch e-paper display with 128×80 resolution USB – 1x USB Type-C for power and programming Expansion 7-pin 2.54mm pitch header with 5x GPIO, 2x ADC, 2x DAC, 3.3V, and GND 8- pin 2.54mm pitch header with 4x GPIO, SPI, 1x ADC, 5V, VBUS, VBat, and GND Misc – Three-way toggle button connected to G36, G0, […]

May 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

T-Nixie Tube is an ESP32 based Nixie Tube lookalike

I tend to see Nixie Tube projects regularly as I spend my days going through the news, and the projects, usually some sort of clock, typically look pretty neat. But although Nixie Tubes can still be purchased online, they are not mass-produced anymore, which may explain why LilyGo decided to create a “fake” Nixie Tube, or let’s call it a lookalike, with T-Nixie Tube that comes with an IPS LCD display driven by an ESP32 WiFi & Bluetooth WiSoC. T-Nixie Tube specifications: Wireless Module – TTGO T-Micro32 module with ESP32 V3 Bluetooth and WiFi processor, 4MB Flash Display – 1.14-inch IPS LCD display covered by glass tube USB – USB Type-C port for power and programming Expansion – 4-pin I2C/UART Grove? connector for T-WATCH sensor kit or T-FH interface sensor modules Misc – PCF8563 RTC, IR receiver, TTP223 touch button, Reset button Power Supply – 5V via USB-C port Dimensions […]

April 7, 2021April 7, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

LilyGo sells Open-Smartwatch open-source hardware ESP32 watch by “Paul’s 3D Things”

We’ve previously covered three variants of LilyGo T-Watch-2020 smartwatch based on ESP32 WiFi & Bluetooth SoC with TTGO T-Watch-2020 (V1) launched about a year ago, following by T-Watch-2020 V3 with a microphone for voice control, and T-Watch-2020 V2 with GPS. The company has recently launched a new rounded smartwatch based on ESP32-PICO-D4 SiP with a twist as they did not design it themselves and instead partnered with “Paul’s 3D Things” for the Open-Smartwatch, and just handle manufacturing and production. LilyGo Open-Smartwatch “Light Edition” specifications: Wireless module – LILYGO T-micro32 module based on ESP32-PICO-D4 module with dual-core ESP32 processor, 4MB FLASH, ceramic antenna or u.FL antenna connector Connectivity – Bluetooth 4.2 BR/EDR BLE and WiFi 4 2.4GHz 802.11 b/g/n Display – 1.3 inch circular LCD with 240×240 resolution USB – Micro USB for charging and programming Sensor – 3-axis BMA400 accelerator Debugging – USB to TTL via CH340E chip Misc -Reset […]

February 17, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

TTGO T-Watch-2020 V3 ESP32 watch adds microphone for voice control

Lilygo TTGO T-Watch-2020 is a thin, ESP32 smartwatch programmable with Arduino that was introduced last year. The WiFi and Bluetooth-connected watch is equipped with a 1.54-inch LCD capacitive touch screen, a Class-D amplifier, buzzer, accelerometer, RTC, and a battery. The watch is one of the top-selling devices on Lilygo’s Aliexpress store, and they must have had requirements for voice control, so the company has now launched TTGO T-Watch-2020 V3 based on the same design but adding a PDM microphone. As far as I can TTGO T-Watch-2020 V3 specifications are the same as last year’s model, except for the microphone: SoC – Espressif ESP32 dual-core wireless processor with 520KB SRAM System Memory – 8MB PSRAM Storage – 16MB QSPI flash Display – 1.54-inch LCD capacitive touch screen Audio – Max98357 Class-D amplifier, buzzer/speaker, PDM microphone Connectivity – 802.11b/g/n WiFi 4 and Bluetooth 4.x/5.1 via ESP32 Sensors – BMA423 three-axis accelerometer with […]

December 4, 2020December 4, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

$25 TTGO T5 4.7-inch e-Paper Display comes with ESP32 WiFi & Bluetooth SoC

We’ve very recently covered M5paper IoT development kit based on ESP32 WiSoC, and equipped with a 4.7-inch touchscreen e-Ink display together with a 1,150mAh battery all nicely packed into an enclosure. It looks great, but costs $69, so if you’d like to integrate this type of ESP32 connected display into your own project at a lower cost, you may be interested in TTGO T5 4.7-inch e-Paper display with 16 gray levels fitted with an ESP32-WROVER-E module with 16MB flash, and 8MB PSRAM. TTGO T5 key features and specifications: Display 4.7-inch ePaper display with 960×540 resolution, 16 gray levels , partial refresh support 6-pin FPC touchscreen connector Wireless module – ESP32-WROVER-E with ESP32-D0WDQ6 V3 dual-core processor, 16MB flash, 8MB PSRAM USB – 1x USB-C port Expansion – 4-pin connector with GPIOs, GND, 3.3V Misc – 1x reset button, 4x user buttons Debugging – USB-C port connected to USB to TTL CP2104 […]

November 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

TTGO T-Higrow is a WiFi & Bluetooth connected soil temperature & moisture sensor

LilyGO WiFI Bluetooth soil-sensor kit battery case

LilyGO has made plenty of ESP32 “TTGO” boards with various features be it PoE, battery support, OLED display, cellular connectivity, and even a devkit in watch form factor. The latest product from the company specifically targets smart farming/gardening as TTGO T-Higrow embeds either DHT11 temperature and humidity sensor or BME280 temperature, humidity, and barometric sensor to report soil temperature and moisture over Bluetooth or WiFi. It can also come as a kit with a battery and a 3D printed enclosure. TTGO T-Higrow board specifications: SoC – Espressif Systems ESP32 dual-core LX6 processor @ up to 240 MHz with 520 LB SRAM, Wi-Fi & Bluetooth Storage – 4MB QSPI flash Wireless 2.4 GHz 802.11b/g/n WiFi 4 up to 150 Mbps Bluetooth 4.2 BR/EDR and BLE Sensors Option 1 – DHT11 temperature and humidity sensor Option 2 – BME280 temperature, humidity, and barometric sensor Expansion – 2x 12-pin through holes with UART, […]

August 31, 2020August 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Heart Rate Development Kit Features ESP32 WiSoC, MAX30102 Pulse Oximeter & HR sensor

Arduino ESP32 Heart Rate-Oxygen Level Monitor

LilyGO has launched a fair amount of ESP32 boards with some less common features like Ethernet and OLED Display, cellular connectivity, LoRa & GPS, PoE, watch form factor, and more. Their latest product is somewhat different from their earlier boards with the TTGO Heart rate programming development kit being closer to a reference design since it comes with an enclosure similar to commercial products. The heart rate devkit features ESP32 WiFi and Bluetooth SoC, a small LCD, as well as a Maxim Integrated MAX30102 pulse oximeter and heart-rate sensor. TTGO heart rate development kit specifications: SoC – Espressif Systems ESP32 dual-core Tensilica SoC with WiFi 4 & Bluetooth connectivity Display – 0.96-inch IPS LCD via ST7735 SPI controller Sensors MAX30102 heart rate blood oxygen I2C sensor MPU6050 6-axis accelerometer and gyroscope (I2C) Debugging – Micro USB port via CP2104 USB to TTL bridge Misc -PCF8563 RTC, user button Battery […]

August 28, 2020August 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

RISC-V & ESP32 based TTGO Handheld T-WATCH K210 AIoT DevKit Works with a 9V Battery

TTGO Handheld T-WATCH-K210 RISC-V & ESP32 Devkit

LilyGO TTGO T-Watch K210 AIOT is a rather thick watch development kit based on Kendryte K210 RISC-V AI Processor and ESP32 WiSoC capable of performing AI workloads such as face detection using a USB power source. We first covered the development kit in June, and the company releases some small variants from time to time with the latest being TTGO Handheld T-Watch K210 with basically the same hardware, plus the addition of a handle that adds a power button, and a compartment for a 9V battery to power the watch/devkit. TTGO Handheld T-Watch K210 specifications: SoC – Kendryte K210 dual-core 64-bit RISC-V processor with 8MB RAM, AI accelerators Storage – 16MB flash, MicroSD card slot Display – 1.54-inch capacitive touch IPS screen connected over an 8080 interface Camera – Adjustable 2MP OV2640 sensor with 65-degree lens (optional 120-degree angle lens), AS312 “human” infrared sensor Connectivity – 2.4 GHz 802.11b/g/n WiFi […]