ubuntu

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on Review of Allo Vana Player Linux HiFi Audio System with Max2Play, SqueezeBox and Kodi

Review of Allo Vana Player Linux HiFi Audio System with Max2Play, SqueezeBox and Kodi

Last month I showcased what I called “Allo Sparky Audio Kit” with a DAC board (Piano), an amplifier board (Volt), and usually hard to find  reclocker and capacitance multiplier boards (Kali & CM), all connected to Allo Sparky ARM Linux development board powered by Actions Semi S500 quad core Cortex A9 processor, and running Ubuntu 12.04. In the first post, I just described the boards, and showed how to assemble the kit, but now that I have received the user’s manual, it turns out the kit is actually called “Vana Player” and the provided Ubuntu firmware image runs Max2Play Browser based system that’s also available for Raspberry Pi and ODROID boards. Before starting the kit, you’ll need to connect speakers to Piano DAC board and/or Kali board, as well as a 19.5V power source such as a laptop power supply to connect to the CM board. I connected some USB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 33 Comments on FriendlyARM Introduces NanoPi NEO AIR Board with WiFi & BLE, Camera Interface and 8GB Storage for $17.99

FriendlyARM Introduces NanoPi NEO AIR Board with WiFi & BLE, Camera Interface and 8GB Storage for $17.99

FriendlyARM launched NanoPi NEO board with Allwinner H3 processor, Ethernet, and USB ports for $7.99 to $9.99 in July, and the company is back with a new board with the same form factor and processor, by trading Ethernet for WiFi, dropping one USB 2.0 port for a DVP camera interface, and adding an 8GB eMMC flash. NanoPi NEO AIR specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – 8GB eMMC Flash (Samsung) + micro SD card slot Connectivity – WiFi 802.11 b/g/n and Bluetooth 4.0 LE (via Ampak AP6212 module) with IPEX antenna connector USB – 1x micro USB OTG port, 2x USB via headers Camera – 1x DVP camera interface with optional 5MP CAM500B camera Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 26 Comments on Orange Pi Zero and Orange Pi i96 96Boards IoT Edition Boards Coming Soon

Orange Pi Zero and Orange Pi i96 96Boards IoT Edition Boards Coming Soon

Shenzhen Xunlong Orange Pi boards are relatively popular thanks to their low price, and support on communities such as Armbian, but two new upcoming Orange Pi boards might make the company even more relevant in the development board space. First, the company is nearing completion of the tiny, and hopefully ultra cheap, Orange Pi Zero board with Allwinner H2+ processor, and Linaro has announced that an Orange Pi i96 boards compliant with 96Board IoT specifications is also coming soon. Orange Pi Zero The board has not been released, but some pictures have been uploaded to Armbian forums. Orange Pi Zero looks quite similar to NanoPi NEO board but with different processor, a slightly larger form factor, and both Ethernet and wireless connectivity. We don;t have other information for now, but it still possible to get most of Orange Pi Zero specifications from the photos: SoC – Allwinner H2(+) quad core […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Parrot S.L.A.M Dunk is a Ubuntu & ROS Computer with 3D Depth Cameras for Drones & Robots

Parrot S.L.A.M Dunk is a Ubuntu & ROS Computer with 3D Depth Cameras for Drones & Robots

Parrot and Canonical have partnered to develop the Parrot S.L.A.M.dunk development kit for the design of applications for autonomous navigation, obstacle avoidance, indoor navigation and 3D mapping for drones and robots, and running both Ubuntu 14.04 and ROS operating systems. The name of the kit is derived from its “Simultaneous Localization and Mapping algorithm” (S.L.A.M) allowing for location without GPS signal. Parrot S.L.A.M Dunk preliminary specifications: SoC – NVIDIA Tegra K1 processor Camera – Fish-eye stereo camera with a 1500×1500 resolution at 60fps Sensors – Inertial-measurement unit (IMU), ultrasound sensor up to 15 meters range, magnetometer, barometer Video Output – micro HDMI USB – 1x micro USB 2.0 port, 1x USB 3.0/2.0 port Weight – 140 grams Parrot S.L.A.M dunk can be fitted various drones and robotic platforms such as quadcopters and fixed-wings, rolling robots and articulated arms using mounting kits. The computer module is then connected to the host […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 48 Comments on Marvell ESPRESSOBin Board with Gigabit Ethernet, SATA, mini PCIe, and USB 3.0 To Launch for $39 and Up (Crowdfunding)

Marvell ESPRESSOBin Board with Gigabit Ethernet, SATA, mini PCIe, and USB 3.0 To Launch for $39 and Up (Crowdfunding)

I can often read people hoping for an inexpensive community board for network, storage and connectivity applications with high speed interface like SATA, multiple Gigabit Ethernet port, USB 3.0 and/or mini PCIe, and that’s exactly what Globalscale Technologies is about to offer with their Marvell ARMADA 3700 based ESPRESSOBin development board to go for $39 and up via Kickstarter. Marvell ESPRESSOBin board specifications: SoC – Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz System Memory – 512MB DDR3 or optional 1GB DDR3 Storage – 1x SATA interface, 1x micro SD card slot with footprint for an optional 4GB EMMC Network Connectivity 1x Topaz Networking Switch 2x GbE Ethernet LAN 1x  Ethernet WAN 1x MiniPCIe slot for Wireless/BLE periphereals USB – 1x USB 3.0, 1x USB 2.0, 1x micro USB port Expansion – 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 29 Comments on Nextcloud Box is a $80 Private Cloud Server with 1TB HDD for Development Boards

Nextcloud Box is a $80 Private Cloud Server with 1TB HDD for Development Boards

While there are plenty of cloud services provided by companies such as Dropbox or Google, you may want to manage you own private cloud server instead for performance and/or privacy reasons. One typical way to do this is to install Owncloud or Nextcloud (a fork of Owncloud), on a Linux computer or board such as Raspberry Pi 3. The former is usually a little expensive for just this task, the latter often results in cable mess, and in both case, some people may not be comfortable with setting it all up. Nextcloud, Western Digital, and Canonical seems to have addressed most of those issues with Nextcloud Box including a 1TB USB 3.0 WDLabs harddrive, Nextcloud case with space for the drive and small ARM or x86 Linux development boards, and a micro USB power supply. The kit also include a micro SD card pre-loaded with Snappy Ubuntu Core, Apache, MySQL […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on Receive Android SMS & Call Notifications in Ubuntu 16.04 with KDE Connect (or Not?)

Receive Android SMS & Call Notifications in Ubuntu 16.04 with KDE Connect (or Not?)

I often miss calls, and I may be slow to answer SMS on my Android phone, but I’m often in front of my computer, so I decided to look for solutions to show SMS and call notifications on my computer running Ubuntu 16.04. I first found LinConnect, but it does not seem to be developed anymore, and after some more research I discovered that KDE Connect should do the job. The developer just released KDE Connect 1.0 a few weeks ago with add encryption, the ability to reply to SMS from your computer and more… One person posted instructions for Kubuntu 16.04. There’s just a problem it won’t work with Unity desktop, only KDE Plasma, due to a lack of support for Qt 5.6. You can still use the older version without encryption and other new features by “simply” running:

However the installation failed for me:

An “apt […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on WeTek Play 2 Amlogic S905 TV Box Gets Ubuntu 16.04 Mate and Minimal Firmware Images

WeTek Play 2 Amlogic S905 TV Box Gets Ubuntu 16.04 Mate and Minimal Firmware Images

WeTek Play 2 is the latest TV box from WeTek with DVB or ATSC tuner, and powered by Amlogic S905-H processor. It ships with Android 5.1.1, but Ubuntu 16.04 Mate and Ubuntu 16.04 minimal firmware images have been released by the community. You can try Ubuntu 16.04 LTS Mate (with desktop environment) or the headless Ubuntu 16.04 LTS minimal image by uncompressing the images, and flashing them to a micro SD card with dd or Win32DiskImager.  Two default credentials (username/password) are provided:  wetek/wetek and root/wetek. This required the latest Play 2 Android firmware, so make sure you get the latest OTA update before trying Ubuntu. The Ubuntu 16.04 images should just boot from the SD card without replacing or affecting your Android installation. If this type of images for Amlogic S905 seems similar, it’s because are based on Hardkernel ODROID-C2 Ubuntu 16.04 images. You can find the Linux kernel for […]

Exit mobile version