ubuntu News - Page 136 of 168 - CNX Software

October 15, 2014November 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

MEEGO-T01 HDMI TV Stick Supports Android, Windows 8.1, and Ubuntu/Linux

ARM based HDMI TV dongles have been available for over two years, mostly running Android, but the community has managed to install Linux desktop operating systems such as Ubuntu or Debian on these tiny gadgets with some limitations. But now that Intel is making low power SoC for tablets, at least one company has decided to make an HDMI TV stick powered by Intel “Bay Trail-T” Z3735F/G quad core processor, which can run Android, Windows 8.1, and Linux based desktop operating systems such as Ubuntu. Meegopad MEEGO-T01 (aka APM-D01?) hardware specifications: SoC – Intel Atom Z3735F / Z3735G “Bay Trail” quad core processor @ 1.33 GHz (Bust freq: 1.83 GHz) with Intel HD graphics (2W TDP) System Memory 1 GB DDR3L-1333 for Z3735G (32-bit up to 5.3 GB/s) 2 GB DDR3L-1333 for Z3735F (64-bit up to 10.6 GB/s) Storage – 16 or 32 GB eMMC + micro SD slot Video […]

October 4, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

How to Upgrade Allwinner A80 OptimusBoard Firmware

After informing Allwinner I had some rather slow write speed (3MB/s) to the NTFS partition of my USB drive on my A80 OptimusBoard, they kindly provided a new compressed Android firmware image (sun9iw1p1_android_optimus_v1.2_20140930.img.7z) with some NTFS optimizations that can be downloaded from baidu (password: x2tz), mega.co.nz or simos.info (please only use this link, if the other two do not work as it’s a private website and monthly bandwidth may be limited). I vaguely remember tools like LiveSuit (Linux) or PhoenixSuite (Windows), and I ended up on sunxi-linux Livesuit wiki as I’m running Ubuntu 14.04 on my PC, but you should be able to flash the firmware with PhoenixSuite if you run Windows. The instructions below can also be used for other Allwinner based devices. First you need to install LiveSuit, and build Allwinner USB drivers as follows:

sudo apt-get install dkms git build-essential
git clone https://github.com/linux-sunxi/sunxi-livesuite.git
cd sunxi-livesuite/awusb
make
sudo cp awusb.ko /lib/modules/`uname -r`/kernel/
sudo depmod -a
sudo modprobe awusb
cd..

sudo apt-get install dkms git build-essential

git clone https://github.com/linux-sunxi/sunxi-livesuite.git

cd sunxi-livesuite/awusb

make

sudo cp awusb.ko /lib/modules/`uname -r`/kernel/

sudo depmod -a

sudo modprobe awusb

cd..

In order to use LiveSuit as a normal user, you also have […]

September 27, 2014April 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Firefly-RK3288 Development Board is Now Available for $189

Three days ago, a T-chip representative informed me privately that Firefly development board (Rockchip RK3288) would not be available on foreign websites, and that it was unclear when the board would be selling in China. So either I’ve been lied to, or there’s poor internal communication within the company, as they’ve now listed Firefly-RK3288 board on Taobao for 800 CNY (~$130), and it’s also available on GeekBuying for $159 including shipping, possibly by somebody unrelated to T-chip, especially there are only 3 units for sale. Let’s go the specifications that have slightly changed since the original announcement: SoC – Rockchip 3288 quad core ARM Cortex A12 / A17 up to 1.8 GHz with Mali-T764 GPU supporting OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory – 2G DDR3 Storage – 16 GB eMMC flash + micro SD slot Video I/O HDMI 2.0 up to 3840×2160@60p VGA out (D-SUB connector) Dual MIPI, Dual LVDS and and EDP […]

September 27, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 14.09 Release with Kernel 3.17 and Android 4.4.4

Linaro 14.09 has just been released with Linux kernel 3.17-rc4 (baseline), Linux 3.10.54 & 3.14.19 (LSK), and Android 4.4.2 & 4.4.4. Linaro has kept working on their member boards such as IFC6410 (Qualcomm), D01 (Huawei/Hisilicon), Ardnale (Samsung), and Juno (ARM). They’ve also announced they’ll change the tools to build GCC by using cbuild2 instead of cbuild1 for next release, and they’ve enabled a build with gcov (for code coverage analysis) which may mean they’ll work on reducing the kernel size by getting rid off unused code. I’ve also noticed the Arndale and Arndale Octa Ubuntu images are now based on Linux LSK with Mali GPU support since last month. Here are the highlights of this release: Linux Linaro 3.17-rc4-2014.09 GATOR version 5.19 updated topic from Qualcomm LT (ifc6410 board support) and HiSilicon LT updated Versatile Express ARM64 support (FVP Base and Foundation models, Juno) from ARM LT. updated Versatile Express […]

September 25, 2014September 26, 2014 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Rikomagic Announces MK902II LE Ubuntu Mini PC Powered by Rockchip RK3288 SoC

Rikomagic announced their MK902II mini PC based on Rockchip RK3288 in May, and which has started shipping recently for about $130. The company have now announced MK902II LE (Linux Edition) based on the same hardware, but instead of running Android 4.4, it’s running Xubuntu 14.04 with some virtualization technique that allows it to run x86 Linux programs such as Skype, and it can even support Wine to run Windows programs. MK902II LE specifications: SoC – Rockchip RK3288 Quad Core Cortex A12/A17 up to 1.8GHz with ARM Mali-T764 GPU supporting OpenGL ES1.1/2.0/3.0, Open VG1.1, OpenCL, DirectX11 System Memory – 2GB (Dual channel 64 bit DRAM controller) Storage – 16GB Internal eMMC with Xubuntu 14.04 preinstalled + micro SD card slot Video Output- HDMI (1080p), and AV output Audio Output – HDMI, AV output, optical output, or external USB audio card (not included) Connectivity – Gigabit Ethernet, 802.11 b/g/n Wi-Fi. USB – […]

September 23, 2014September 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

pcDuino Acadia 1 is a Freescale i.MX6 Quad Development Board with Arduino Headers

Linksprite has been pretty busy recently. After announcing the $39 pcDuino3 Nano, they’ve now unveiled a new board named pcDuino Acadia 1 powered by Freescale i.MX6 Quad processor with 1GB RAM, 8GB eMMC, a few common ports, and Arduino headers in order to connect Arduino shields to their Linux/Android board. pcDuino Acadia 1 (preliminary) specifications: SoC – Freescale i.MX6 Quad with four ARM Cortex A9 cores up to 1.2GHz, and Vivante GC2000 GPU with support for OpenGL/ES 2. x, OpenCL EP support, and OpenVG 1.1. System Memory – 1GB DRAM Storage – 8GB eMMC, 2x micro SD card slots (up to 128GB), and SATA Video Output – HDMI 1.4 with HDCP support, LVDS Audio Output – 3.5mm analog audio interface Camera – 1x MIPI, 1x CSI Connectivity – 10/100/1000Mbps Ethernet (limited to 470Mbps) USB – 2x USB 2.0 host ports, 1x micro USB OTG Expansion Headers – Arduino UNO compatible […]

September 22, 2014 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

The New Radxa Rock Lite Rockchip RK3188 Development Board Sells for $59

You may have heard about Radxa Rock Lite development board before, so let’s clear up the different versions of the Radxa Rock first. There’s a total of four Radxa Rock models: Radxa Rock (2013) – The original version with 2GB RAM, 8GB NAND Flash, and Wi-Fi/Bluetooth Radxa Rock Lite (2013) – 1GB RAM, 4GB NAND Flash, and Wi-Fi only Radxa Rock Pro (2014) – An evolution of the Radxa Rock still with 2GB RAM, 8GB NAND flash, Wi-Fi/Bluetooth but adding LVDS and camera interfaces. Radxa Rock Lite (2014) – 1GB RAM, no NAND flash, and Wi-Fi only The fist two versions appear to have been phased out, as they are not listed for sale on Radxa Rock website, and today, I’ll write about Radxa Rock Lite (2014). Radxa Rock Lite (2014) specifications: SoC – Rockchip RK3188 ARM Cortex-A9 quad core @ 1.6Ghz + Mali-400 MP4 GPU System Memory – 1GB […]

September 18, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$39 PcDuino3 Nano ARM Linux Development Board Features HDMI, SATA, Gigabit Ethernet, Arduino Headers…

Linksprite recently announced PcDuino3 Nano development board powered by AllWinner A20 dual core processor. PcDuino3 Nano is, as you can expect, a smaller and cheaper version the company’s PcDuino3 board without Wi-Fi module, LVDS header, and I2S interface. The board does not appear to support Li-Po batteries either, but it adds one extra USB host port compared to its big brother. pcDuino3 Nano specifications: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1.0 GHz with Mali 400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, SATA connector, and microSD card slot (up to 32GB) Video Output – HDMI 1.4 with HDCP support Audio Out – 3.5mm analog audio interface Connectivity – Gigabit Ethernet USB – 2x USB host, 1x USB OTG Expansion Headers – Arduino UNO extension interface with 14xGPIO, 2xPWM, 6xADC, 1xUART, 1xSPI, 1xI2C. Camera – MIPI camera support Misc – IR receiver Power […]