ubuntu News - Page 75 of 188 - CNX Software

May 30, 2021January 17, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MyCobot robotic arm is offered with Raspberry Pi 4 or M5Stack ESP32 modules

Elephant Robotics’ MyCobot robotic arm was introduced last year with M5Stack Atom & Basic ESP32 modules with 6-degrees of freedom, a 250 grams max payload, available now for $599. The company has launched a new $699 version – MyCobot-Pi – with most of the same features, except for an upgrade to Raspberry Pi 4B which offers more performance and flexibility. Both versions of MyCobot arm robotic arm support accessories such as a gripper and a suction pump attachable through a LEGO connector, but while the original version – MyCobot-M5 – relies on Arduino programming, the new MyCobot-Pi runs Debian/Ubuntu and ROS operating systems with image recognition algorithms that can work with a variety of cameras. Since we’ve missed last year’s announcement, we’ll cover both models in this article. MyCobot Robotic Arm Despite the mechanical parts being the same, the specifications for MyCobot-M5 and MyCobot-Pi differ quite a lot: Controller MyCobot-M5 […]

May 28, 2021May 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Banana Pi BPI-M2 Pro compact Amlogic S905X3 SBC launched for $61

Banana Pi has already designed an Amlogic S905X3 SBC with Banana Pi BPI-M5 that closely follows Raspberry Pi 3 Model B form factor, but they’ve now launched a more compact model with Banana Pi BPI-M2 Pro that follow the design of the company’ earlier BPI-M2+ SBC powered by the good old Allwinner H3 processor. BPI-M2 Pro comes with 2GB RAM, 16GB eMMC storage, HDMI video output, Gigabit Ethernet, Wifi & Bluetooth connectivity, as well as two USB 3.0 ports. Banana Pi BPI-M2 Pro specifications: SoC – Amlogic S905X3 quad-core Cortex A55 @ up to 2.0 GHz with an Arm Mali-G31 GPU System Memory – 2GB LPDDR4 Storage – 16GB eMMC flash, microSD card slot Video & Audio Output – HDMI 2.1 up to 4Kp60 with HDR, CEC, EDID support Connectivity Gigabit Ethernet Dual-band 802.11 b/g/n/ac WiFi 5 1×1 and Bluetooth 4.2 via Realtek RTL8821CU module USB – 2x USB 3.0 […]

May 23, 2021May 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Rock Pi 4 Plus SBC gets Rockchip OP1 processor, eMMC flash pre-loaded with Twister OS Armbian

The low-cost Rock Pi 4 SBC was unveiled in 2018 with a Rockchip RK3399 processor, up to 4GB RAM, and Raspberry Pi 3 form factor. Rock Pi 4 Plus builds on the relatively popular single board computer with an upgrade to Rockchip OP1 processor, which is a higher performance RK3399 SoC typically used in Chromebooks and ASUS Tinker Board 2. The new board also adds 16 to 128 GB eMMC flash, instead of relying on an optional eMMC module, and will come pre-loaded with Twister OS Armbian lightweight desktop OS based upon Armbian Focal 20.04.1 LTS (aarch64) for Rockchip RK3399-based SBCs. Four variants of Rock Pi 4 Plus share most of the same specifications: SoC – Rockchip OP1 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 2.0 GHz, 4x Cortex-A53 @ up to 1.4 GHz, a Mali-T864 GPU with support OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC, and […]

May 19, 2021May 19, 2021 by Ian W MORRISON (Linuxium) - 7 Comments

Beelink GKmini Review – An Intel Celeron J4125 mini PC reviewed with Windows 10 Pro, Ubuntu 20.04

Beelink have recently released another small form factor (SFF) design similar to the traditional Intel ‘NUC’ called the GKmini which they have provided for review. Available as a fully configured Windows 10 Pro mini PC means it can be up and running straight out of the box. Hardware Overview The Beelink GKmini physically consists of a 115mm x 102mm x 43mm (4.53 x 4.02 x 1.69 inches) rectangular plastic case. It is an actively cooled mini PC and uses Intel’s 14 nm J4125 Gemini Lake Refresh processor which is a quad-core 4-thread 2.00 GHz processor boosting to 2.70 GHz with Intel’s UHD Graphics 600. The front panel has a power button, a headphone jack, two USB 3.0 ports, and a ‘CLR CMOS’ pinhole that leads to a button which when pressed clears the CMOS. The rear panel includes the power jack, dual HDMI ports, a gigabit Ethernet port, a further […]

May 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

DSBOX-NX2 – An NVIDIA Jetson Xavier NX Industrial Fanless PC

Turkish company Forecr has launched DSBOX-NX2 NVIDIA Jetson Xavier NX based industrial fanless PC equipped with the company’s own DSBoard-NX2 carrier board and designed for “multi-stream deep learning edge analytics” and IIoT applications. The compact embedded computer comes with 8GB RAM, up to 2TB SSD storage, as well as HDMI 2.0 output, Gigabit Ethernet, two USB 3.1 ports for high resolution cameras, serial ports, and some GPIOs among other features. Forecr DSBOX-NX2 specifications: System-on-Module – NVIDIA Jetson Xavier NX module with hexa-core NVIDIA Carmel ARM v8.2 64-bit processor, NVIDIA Volta GPU with 384 CUDA core & 48 Tensor Cores, 8 GB 128-bit LPDDR4x, 16GB eMMC flash Storage – M.2 Key M SSD slot, MicroSD card slot Video Ouput – 1x HDMI 2.0 up to 3840×2160 at 60 Hz Networking Gigabit Ethernet Wireless – WiFi, Bluetooth, 4G LTE, 5G connectivity by extension sockets USB – 2x USB 3.1 Type-A Expansion 1x […]

May 17, 2021May 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 32 Comments

ROC-RK3566-PC single board computer supports up to 8GB RAM, M.2 NVMe SSD’s

Firefly has now launched a Rockchip RK3566 single board computer named ROC-RK3566-PC, following the launch of Station P2 RK3568 mini PC on Indiegogo last March, and the completion of the campaign a few days ago. The quad-core Cortex-A55 SBC supports up to 8GB ECC memory, up to 128GB flash, M.2 2242 MVMe SSD’s, HDMI 2.0 and MIPI DSI video interfaces, Gigabit Ethernet, and more. ROC-RK3566-PC specifications: SoC – RockChip RK3566 quad-core Cortex-A55 @ up to 1.8GHz with Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2. OpenCL 2.0. Vulkan 1.1, 0.8 TOPS NPU, 4Kp60 H.265/H.264/VP9 video decoder System Memory – 2GB, 4GB, or 8GB LPDDR4 RAM with support for “all-data-link ECC” (TBC: Because the info I have so far is that ECC is supported on RK3568, not on RK3566) Storage 32GB, 64GB, or 128GB eMMC flash M.2 PCIe 2.0 socket for M.2 2242 NVMe SSD MicroSD card slot Video […]

May 12, 2021May 12, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gateworks GW7200 Dual Gigabit Ethernet industrial SBC, also supports WiFi, Cellular, and GPS

Gateworks GW7200 dual GbE industrial SBC

Gateworks GW7200 is a versatile dual Gigabit Ethernet industrial single board computer with an NXP i.MX8M Mini processor, 1GB to 4GB of RAM, mini PCIe expansion sockets for wireless connectivity, serial interfaces, industrial temperature range, wide range input voltage, and long-term supply. The board should be a better match to projects with industrial requirements, for example, an industrial IoT gateway than lower-cost dual GbE alternatives such as NanoPi R2S or Raspberry Pi CM4 IoT Router Carrier Board Mini. Gateworks GW7200 specifications: SoC – NXP i.MX 8M Mini quad-core processor @ 1.6GHz with Vivante 2D & 3D GPUs System Memory – 1GB to 4GB DDR4-2133 SDRAM Memory Storage – 8GB to 64GB eMMC flash, MicroSD card slot, serial configuration EEPROM Connectivity Dual GbE Ethernet ports supporting 802.3at/af and passive PoE Optional 802.11ac/n WiFi 5/4 via mini PCIe socket Optional Cellular (Cat M1, 4G, 5G) via mini PCIe socket + NanoSIM card […]

May 11, 2021September 16, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

SolidRun HoneyComb LX2K becomes a certified Arm SystemReady ES platform

SolidRun HoneyComb LX2K is part of our list of the 5 most powerful Arm SBC’s in 2021. The mini-ITX board features an NXP LX2160A 16-core Arm Cortex-A72 processor, supports up to 64GB RAM, offers high-speed networking thanks to up to 4x SFP+ 10GbE cages and a Gigabit Ethernet port, as well as four SATA ports, a PCIe x8 slot, M.2 SSD slot and more. The board is ideal for networking applications and can be also be integrated into an Arm workstation for native application development. But just last month, we noted that while SolidRun talked about SBSA compliance a while ago, the status was unclear. The good news is that HoneyComb LX2K has just now become a certified Arm SystemReady ES (Embedded Server) compliant platform. Arm SystemReady is a set of standards and a compliance certification program that ensures systems just work with generic, off-the-shelf operating systems straight out of […]