Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Congatec Announces Low Power x86 SoMs based on AMD G-Series and Intel Atom E3800 SoCs

Congatec Announces Low Power x86 SoMs based on AMD G-Series and Intel Atom E3800 SoCs

Congatec has announced two new low power x86 computer modules for embedded systems: Qseven modules based on AMD G-Series GX-210HA, GX-209HA and GX-210JA (6 to 9W TDP), and COM Express modules powered by Intel Atom “Bay Trail-I” E3800 series SoC (5 to 10W TDP), a well as Celeron N2930. conga-QG Qseven SoM Powered by AMD G-Series SoCs Congatec conga-QG Qseven modules specifications: SoC AMD Embedded GX-210HA (2 x 1.0 GHz, L2 cache 1MB, 9 W) with AMD Radeon HD 8210E Graphics AMD Embedded GX-210JA (2 x 1.0 GHz, , 6W) with AMD Radeon HD 8180E Graphics AMD Embedded GX-209HA (2 x 1.0GHz, , 9W) with AMD Radeon HD 8180E Graphics System Memory – max. 8GB ECC with up to DDR3L-1333. 2GB by default Storage – Silicon Motion FerriSSD up to 64G Connectivity – Gigabit Ethernet I/O Interfaces Up to 4 x PCI Express 2.0 2 x SATA 2.0 3Gb/s 1 x USB 3.0, 5 x USB 2.0 LPC bus,  SM-Bus, […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Compulab Fit-PC4 Fanless mini PC Powered by AMD GX-420CA Quad Core G-Series SoC

Compulab Fit-PC4 Fanless mini PC Powered by AMD GX-420CA Quad Core G-Series SoC

CompuLab has just announced fit-PC4, a miniature fanless PC based on AMD GX-420CA G-Series SoC with four “Jaguar” cores clocked 2.0GHz,and Radeon HD 8400E graphics, and supporting up to 16 GB RAM, and storage via SATA, mSATA or a micro SD card. This if for the Pro version, but there’s also a Value version powered by A4-1250 APU. Fit-PC4 specifications: SoC / APU fit-PC4 Pro –  AMD GX-420CA quad core processor @ 2.0 GHz with AMD Radeon HD 8400E Quad-core (25W TDP) fit-PC4 Value – AMD A4-1250 dual core APU @ 1.0 GHz with amd Radeon HD 8210 (8W TDP) System Memory – Up to 16 GB DDR3/DDR3L/DDR3U (2 SODIMM) Storage – Internal 2.5” HDD/SSD + mSATA + micro-SD Display – 2x HDMI 1.4a up to 1920 x 1200 + CEC support Audio – S/PDIF 7.1 input/output + stereo line-out / MIC in Connectivity 2x Gbit Ethernet (Intel i211 Ethernet controllers) Wireless in fit-PC4 Pro – WLAN 802.11ac (2.4/5GHz dual band […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Cydia Impactor Provides an Alternative Method to Root Android Devices via Windows or Mac OS X

Cydia Impactor Provides an Alternative Method to Root Android Devices via Windows or Mac OS X

Cydia Impactor is a GUI tool for working with Android devices from computers running Windows or Mac OS X.  It can be used to reboot the device, enter fastboot mode, access the shell, scan for USB drivers for your device, and a bit more. But its key feature is to provide root access to many Android devices by exploiting of the Android “Master Key” vulnerability, and if it does not work falling back to a different signature verification bug. There are other tools (e.g. unlockroot, Moborobo,…) or methods to provide root access, but if those do not work or you have troubles installing drivers, Cydia Impactor may be worth a try. I did try on MK908 and T428 mini PCs in a Windows XP netbook, but for some reasons the software could not detect the USB connection (with USB debug enabled in Android), although Moborobo did. But Benjamin, who tipped me about this application, told me he successfully rooted a Mediatek […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Ostec Wi-Fi Telescopes, Wi-Fi and USB Portable Microscopes for iOS, Android, and PCs

Ostec Wi-Fi Telescopes, Wi-Fi and USB Portable Microscopes for iOS, Android, and PCs

Ostec Electro-Optical Science and Technology, is a company headquartered in Shenzhen, China, with a factory based in Guangzhou, that manufactures optical devices such as telescopes, microphones, endoscopes, and scanners that connects to your computer, or tablet via USB or Wi-Fi. Charbax of armdevices.net interviewed the company in April at the Hong Kong Electronics Fair, and uploaded the video (see bottom of post) very recently. Let’s have a closer at some of the products. KoPa WiFi Telescope (Model TW501) The first device is TW501 Wi-Fi telescope that comes with a tablet holder, and allows you to visualize the picture directly on your smartphone, tablet, or other Wi-Fi capable device either via specific Apps or via the web browser. It apparently not suited for astronomy, but can be used for bird watching, building surveillance, hiking, and any application where you may need to take close-up pictures or videos. Wi-Fi Telescope Specifications: Sensor type – 5M 1/2.5″ CMOS Max resolution – 2592 x […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on $55 AX-14 DLNA, WiDi & Miracast Dongle Works with Android / iOS Devices, and Windows 7/8 PC

$55 AX-14 DLNA, WiDi & Miracast Dongle Works with Android / iOS Devices, and Windows 7/8 PC

Miracast is a new standard allowing you to play videos or mirror your Android device display on a TV via Wi-Fi direct. All you need is a Wi-Fi device that can be connected to the HDMI and USB (for power) ports of your TV, and decode common video codecs. There are not many devices available on the market, but I’ve just found out about AX-14, a Wi-Di and Miracast HDMI adapter that lets you connect your Windows 7 or 8 to your TV via Wi-Di, or your Android / iOS via Miracast. The device also supports DLNA. The hardware specs are said to be as follows: Processor – MIPS24Kc processor (RTD1185PA) @ 500MHz System Memory – 256 MB DDR3 SDRAM Storage – 128 MB NAND Flash Video and Audio engine with HW acceleration Video Codecs & Formats – MPEG-1,MPEG-2,MPEG-4 SP/ASP( Xvid), MPEG-4 AVC(H.264), AVS, VP6, Motion JPEG, H.263 , H.264, DivX 3/4/5/6 (license only), WMV9/VC1, RV8,RV9, MOV, FLV, AVI, MinusVR, […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 23 Comments on $132 Kingdel NC270 Thin Client Powered by Intel Atom N270

$132 Kingdel NC270 Thin Client Powered by Intel Atom N270

Reader onebir tipped me about a low cost Intel Atom based PC on Aliexpress with some decent specs. Kingdel NC270 PC is based on Intel Atom N270 processor @ 1.6 Ghz with 2 GB RAM and 8 GB SSD. It is capable of decoding 720p HD video and features lots of ports which could make it a good entry-level digital signage player among other things. Here are the specs of this nettop. Processor – Intel Atom n270 System Memory – 2 GB (in most places, but it’s also written 1GB in one place in the description) Storage – 8GB SSD (16GB and 320GB version is also available) Connectivity: 10/100 Ethernet WiFi (optional?) Serial Ports – female DB-25, compatible SPP, ECP and EPP | male DB-9, compatible FIFO prefix = st1 16C550 2 PS/2 port (mouse, keyboard) USB – 6 USB host 2.0 ports 1x PCI slot Video Output – VGA port | Composite Audio – Speaker output and Microphone input. […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on AMD Introduces AMD G-T16R G-Series APU with 2.3 Watts Power Consumption

AMD Introduces AMD G-T16R G-Series APU with 2.3 Watts Power Consumption

AMD has unveiled another APU in its Embedded G-Series processor family with the AMD Embedded G-T16R, which aims to provide a more powerful (up to 3x) and less power-hungry (7% less) replacement to AMD Geode LX processors. The AMD G-T16R is targeted at very low power, small form factor and cost-sensitive embedded designs. The company claims the processor consumes about 2.3 watts on average or 4.5 watts thermal design power (TDP). This new AMD embedded processor targets industrial control, point-of-sale, medical appliance and transportation markets.  As with the other G-Series platforms, the G-T16R can fit into small form factor boards by implementing a two-chip platform: APU + controller hub. AMD G-T16R is clocked at 615MHz, features a Radeon HD 6250 GPU and supports 1920×1200 resolution via VGA, single link DVI and DisplayPort 1.1a video outputs. It can also output 1080p via HDMI and LVDS. The APU supports Windows Embedded Compact 7, Green Hills INTEGRITY and Express Logic ThreadX operating systems […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Collabora and Fluendo Release GStreamer SDK 2012.5 Amazon

Collabora and Fluendo Release GStreamer SDK 2012.5 Amazon

Last week, Collabora and Fluendo jointly announced the release of an open source software development kit (SDK ) for GStreamer multimedia framework. The SDK aims at easing the integration of Gstreamer  into projects and provides a pre-built version of the framework which is available for Linux, Windows and Mac OS X. GStreamer is used in many Linux applications such as media players (Rhythmbox, Banshee and Amarok),  video editors (PitiVi), and media centers such as XBMC among other applications. It’s also often the framework used to play videos on ARM platforms with implementations for OMAP 4/5 and devices compliant with the OpenMAX standard. Gstreamer website has also been updated and provides links to download GStreamer SDK and documentation on the home page. The new documentation looks pretty good with fives main sections: Instructions for installing the SDK on Linux (Ubuntu, Debian and Fedora), Windows or Mac OS. 11 basic and 2 advanced tutorials. A  guide to deploying applications. Details about releases such as […]

Support CNX Software – Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples