CNX Software - Embedded Systems News

August 2, 2015August 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Freescale i.MX7 96Boards Compliant Board Coming in Q4 2015

96Boards is an open hardware platform specification for 32-bit and 64-bit processors boards (64+32 = 96), but so far only 64-bit board have been launched or announced, and 32-bit boards were missing from the equation. Freescale will soon change that as they’ve partnered with Arrow Electronics on a 96Boards compliant board powered by Freescale i.MX7 Dual due to be released at the same time as i.MX7 enters mass production, which is scheduled for November 2015. Freescale i.MX6 96Boards (MCIMX7 ?) preliminary specifications: SoC – Freescale i.MX 7Dual with two ARM Cortex A7 cores @ 1.0 GHz, one ARM Cortex M4 core @ 266 MHz, and a 2D image processing engine (no 3D GPU) System Memory – TBD (Probably 512MB or 1GB RAM) Storage – micro SD card slot up to 64GB + flash? (TBC) Video Output – HDMI connector + DSI via HS expansion header Connectivity – Wi-Fi 802.11g/n and […]

August 2, 2015August 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Simblee Low Latency Bluetooth LE IoT Module Loads Its App to Your Smartphone on Demand

RF Digital launched RFDuino Bluetooth Low Energy board in 2013/2014, and the company has now developed Simblee module, whose name is derived from “Simple” and “BLE”, and offers low latency (3ms) and integrates a user application that’s automatically and temporary loaded to your smartphone or tablet upon connection. The module is also part of an add-on board (RFD77201) for RFDuino board. Simblee RFD77101 module specifications: MCU – ARM Cortex M0 micr-controller (Nordic nRF51822???) Memory/Storage – 24KB RAM and 128KB flash for user application Bluetooth Smart / LE Bluetooth Low Energy (BLE) Stack Simblee interference immunity 3ms latency (for connection); 10us accuracy (jitter) -93dBm receiver sensitivity -55dBm to +4dBm TX power Physical range adjustable from a few inches to hundreds of feet Integrated antenna, integrated shield I/Os 29 GPIOs (flexible pin configuration) 6x ADC inputs 4x PWM outputs 2x SPI master/slave, 2x I2C, 1 x UART Security – Built in AES […]

August 1, 2015August 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Cloudshell for XU4 is a $39 NAS Kit for ODROID-XU4 Board

Hardkernel launched ODROID-XU4 development board a couple of weeks ago. The board is a low cost ($74) update to ODROID-XU3 development board, with an Exynos 5422 octa core processor (4x A15, 4x A7), 2GB RAM, Gigabit Ethernet and USB 3.0, making it a pretty good target for a NAS. It’s easy to connect all requires parts such as hard drive and power supply together, but it would normally be a mess on your desk. So the company create a NAS kit for the board with an enclosure, cables, fans, and even an LCD display with they call Cloudshell for XU4 for sell for $39, so you can get a high relatively high performance NAS for around $113 + shipping, which will vary depending on your distributor, as well as an HDD or SSD drive. Cloudshell kit content: Enclosure with top and bottom covers, rear, front and side panels. Available in […]

August 1, 2015August 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Zoomtak T8 Plus Android 5.1 TV Box with Amlogic S812 SoC Features a 2.5″ SATA Bay

We’ve already seen a few Amlogic S802 with SATA support such as Zoomtak T8 with a SATA bay, or Eweat EW802 with an external SATA connector. Zoomtak has now introduced an updated version T8 Plus with Amlogic S812 that will run Android 5.1 and Kodi 15.0 by the end of August. Zoomtak T8 Plus specifications: SoC – Amlogic S812 quad core cortex A9r4 @ 2.0 GHz with Mali-450MP6 GPU System Memory – 2 GB DDR3 Storage – 8GB eMMC flash (16GB optional) + SD/MMC card reader + 2.5″ SATA bay Video Output – HDMI supporting 4K30 and 3D, composite output (RCA) Audio Output – HDMI, stereo RCA, and optical S/PDIF Connectivity – 10/100/1000M Ethernet, dual band 802.11 b/g/n Wi-Fi with external antenna, Bluetooth 4.0 (AP6234 module) USB – 3x USB 2.0 host ports Misc – IR receiver, “restore” pinhole, LED display on front panel, and power button. Power Supply – […]

July 31, 2015April 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Zidoo X1 Android TV Box Unboxing and Teardown

Zidoo X1 is an Android media player powered by Allwinner H3 quad core processor with support for 4K videos up to 30Hz and H.265 / HEVC video codec. The company sent me one unit for review, and today I’ll start by unboxing and tearing down the device, before further testing to get the review posted in a few days. Zidoo X1 Unboxing I’ve received the package by (MY)DHL a few days after it was shipped. The package shows some of the main features like 4K and 3D support, H.265/HEVC codec, Kodi support, and ZIUI which must be the name given to Zidoo user interface. The box comes with an HDMI cable, a user’s manual in English, a warranty card, a 5V/2A power adapter, and a standard IR remote control with IR learning function for 5 keys: Vol +/-, power, AV/TV, and SET so that you can control your TV with […]

July 31, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Leadcore Roadmap Until 2017 Shows 14nm FinFET Processors Planned

I first heard about Leadcore in 2013 when they announced several ARM Cortex A7 and A9 mobile processors, but since then they’ve become a bit more popular after Leadcore L1860C quad core processor found its way into in Xiaomi Redmi 2A smartphone. The company has now shown its roadmap for 2016, and 2017 with some interesting developments. We can expect three processors in 2016 all with 64-bit ARM cores manufactured using 28nm process: An 8-core 64-bit processor with Mali-T820 GPU and LTE Cat 6 modem A 4-core 64-bit processor with an unnamed Mali GPU and LTE Cat 6 modem A quad core Cortex A53 processor with TD-LTE and LTE FDD And in 2017, one processor is scheduled, should be manufactured using 14nm FinFET process, which could mean 2017 will be the year 14nm FinFET goes mainstream even for lower cost processors. That currently unnamed processor will feature eight 64-bit cores […]

July 31, 2015August 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Freaks3D is a Low Cost Portable 3D Printer (Crowdfunding)

ElecFreaks is a design house based in Shenzhen that caters to makers and startups, and started selling Arduino shields and accessories, as well as Raspberry Pi add-on boards, before moving to robotics kits, 3D printers, and other tools in demand by electronics hobbyists. The company has now designed Freaks3D portable 3D printer, and launched an Indiegogo campaign to fund production. Freaks3D printer specifications: Technology – Fused Deposition Modeling Build Volume – 130 x 150 x 100 mm (LxWxH) Nozzle Size – Standard 400 microns Resolution – Layer: 100 microns; XY: 50 microns Filament diameter – 1.75mm Filament Material – PLA or TPU 3D Files Transfer – USB via PC, or SD card Misc – LCD Display, one button operation, printing bed does not require heating Power Supply – 12V / 8A power adapter, or 12V / 5A power bank (Not included) Dimensions – 290 x 320 x 325 mm Weight […]

July 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Next Thing Has Released Software and Hardware Files for the $9 CHIP Computer

Next Thing CHIP computer powered by Allwinner R8 module, also referred as “the $9 computer“, had a very successful crowdfunding campaign having raised over $2,000,000 from nearly 40,000 backers. When launching an electronics products on a crowdfunding campaign, many companies claim their device will be open source, only to disappoint once the perks actually ship, and Next Thing made the same promise, except they appear to have delivered as shown in their latest update “Holy C.H.I.P! It’s C.H.I.P!!!” showing the first production samples, and providing links to hardware design files for the Alpha version, as well as buildroot, U-boot and Linux source code. All resources can be found on docs.nexthing.co, but let’s check what they’ve released so far. Hardware design files on Github include: A Bill of Materials (BoM) Schematics in PDF and DSN formats PCB Layout in BRD and PNG format Pinouts for U12 and U14 connectors Mechanical files […]