CNX Software - Embedded Systems News

January 20, 2015February 26, 2015 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

MINIX NEO Z64 Windows 8.1 / Android Intel mini PC Should Sell Soon for $148 and Up

MINIX NEO Z64 mini PC powered by Intel Atom Z3735F was unveiled in September 2014, but as other Windows 8.1 Intel based mini PCs hit the market in late December, early January, some people suggested NEO Z64 may end up being vaporware… Fortunately, it appears those people might be wrong, as I’ve been informed of a cached page on DX.com selling the computer for $148.07 with Android 4.4.4 pre-installed. MINIX NEO Z64 specifications remain mostly the same as the ones published in September: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz (Burst freq up to 1.83 GHz) and Intel HD Graphics System Memory – 2GB DDR3 Storage – 32GB eMMC flash + micro SD slot Connectivity – 10/100M Ethernet, Wi-Fi 802.11 b/g/n + Bluetooth 4.0 Video Output – HDMI 1.4 Audio Output – HDMI, 3.5mm stereo jack USB – 2x USB 2.0 Misc – Power […]

January 20, 2015January 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Popcorn Hour VTEN Media Player Powered by Sigma Designs SMP8757 STB SoC Supports 4K, H.265 Codec

Cloud Media must have noticed the shortcomings of Rockchip SDK and RK3288 processor found in their Open Hour Chameleon box with pseudo 4K video playback and only partial audio pass-through capability, and the company have not given up on more traditional Linux based media players with a proven track record, as they’ve just announced Popcorn Hour VTEN featuring the latest Sigma Designs SMP8757 SoC with 4K video output. Popcorn Hour VTEN specifications: SoC – Sigma Designs SMP8757 ARM Cortex A9 processor @ 1.2 GHz with ARM Mali-400 GPU System Memory – 1024MB DDR3 Storage – 512MB SLC NAND Flash, 1x eSATA port, 1x SD card slot Video Output – HDMI Audio Output – HDMI, optical S/PDIF, and coaxial S/PDIF Video Containers – MPEG 1/2/4 Elementary, MPEG 1/2 PS, MPEG-2 TS, AVI, ASF, WMV, MKV, MOV (H.264), MP4, 3DMKV, BD-ISO, BDMV, 3D-BD Video Codecs – XViD SD/HD, MPEG-1, MPEG-2 MP@HL, MPEG-4.2, […]

January 20, 2015January 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

MBX-3G is an Android Media Player with a Built-in 3G Modem (Crowdfunding)

Most full sized TV box comes with both Ethernet and Wi-Fi connectivity, but if you live in remote area internet may not be easily available, except possibly via 3G or LTE. There are several ways to handle that. You could connect a 3G USB dongle to your box, but this assume the firmware on your box supports it, or you could gt one cheap of these cheap routers with a USB port, plug the 3G dongle into it, and connect your media player to the router via Wi-Fi or Ethernet. If you’d rather have a single device with an easier setup, MediaBox MBX-3G could be an interesting option. MediaBox MBX-3G specifications: SoC – Quad core ARM Cortex A9 @ 1.6Ghz with quad core GPU (This looks like Rockchip RK3188) System Memory – 2GB DDR3 Storage – 8 eMMC flash + microSD slot (up to 32GB) Video & Audio Output – […]

January 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Independent Dual Display Support on Firefly-RK3288 Development Board (Video)

From time to time, I’m being asked which platform can support dual independent displays, and although I noticed Mele A1000 (Allwinner A10) did support dual displays in Linux, I never really investigated how well it handles it, so I normally recommend to have a look at x86 platforms with AMD or Intel processor that specifically claim support for dual independent display. But today, I’ve noticed a developer working for T-Chip posted a nice demo on T-Firefly forums with two displays connected via HDMI and VGA. The demo shows Firefly-RK3288 development board running Android with two displays in three configurations: Display Mirroring – The same content is shown on both display. Especially useful for digital signage application, where one board can drive two displays with the same content Extended Desktop – The user interface is extended on both monitors. It’s like having a single large monitor with a 32:9 aspect ratio […]

January 19, 2015January 10, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Atmel SAMA5D4 Xplained Ultra Development Board Adds HDMI, 720p Video Decoding

Atmel has introduced an upgrade to their Atmel SAMA5D3 Xplained development board with SAMA5D4 Xplained Ultra replacing SAMA5D36 by SAMA5D44 embedded micro-processor for 720p hardware video decoding support, and adding HDMI output, extra storage and memory, etc… but losing one Ethernet port. Atmel SAMA5D4 Xplained Ultra (XLUT) specifications: MPU – Atmel SAMA5D44 Cortex-A5 Microprocessor @ 536 MHz System Memory – 2x 2Gbit DDR2 memory Storage – 4 Gbit NAND Flash, 1x 4-bit SD card connector (not populated), 1x 4-bit micro SD connector, optional serial EEPROM (SPI), one EEPROM with MAC address and serial number. Connectivity – 1x Ethernet 10/100M Display – 1x LCD interface connector, 1x HDMI port USB – 1x micro USB device connector, 2x USB host connectors Debugging – 1x 20-pin J-TAG connector, 1x EDBG connector (not populated), 1x serial DBGU interface (3.3V) Expansion – Arduino R3-compatible headers, XPRO set of connectors; ADC inputs and CAN interfaces Misc […]

January 19, 2015January 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

LinkIt Connect 7681 is a Wi-Fi IoT Board Powered by Mediatek MT7681

So it looks like Mediatek has decided to carry on with its Mediatek Labs endeavours, as after launching LinkIt ONE last year, they’re about to introduce LinkIT Connect 7681, a development board with a Mediatek MT7681 based Wi-Fi module, and access to various GPIOs. LinkIt Connect 7681 HDK (Hardware Development Kit) specifications: SoC – Mediatek MT7681 Andes N9 processor @ 80 MHz with 64KB RAM, Storage – 1MB SPI Flash for firmware Connectivity – Wi-Fi: 802.11 b/g/n for Station mode; 802.11 b/g for AP mode via a MT7681 module by AcSIP Headers – 12-pin header for UART, 5 GPIOs (also usable as software PWM), RESET, and 3.3V/5V/GND; 6-pin header for SPI, 3.3V and GND. USB – 1x micro USB for power and programming/debugging Misc – Reset push-button, 2x UART LEDs Power Supply – On-board 1A 3.3V voltage regulator (can be powered from USB connector) I/O Voltage – 3.3V for GPIO […]

January 19, 2015January 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Install Ubuntu 14.10 on MeegoPad T01 with a Live ISO Image

MeegoPad T01 has recently been shown to boot Ubuntu and Android, but no installation disk had been provided so far. But thanks to deadhp1, there’s now a “beta” Ubuntu 14.10 image with MATE desktop environment available for download in order to try or install Ubuntu on MeegoPad T01, and other Intel Atom Bay Trail-T devices. Before you decide to try or install the image, be aware that audio and Bluetooth are not working for now, but everything else should work, including hardware video decoding in Kodi. If your device is not using a Realtek rtl8723bs module, Wi-Fi won’t work, and you may need to use a USB Ethernet dongle to get IP connectivity. The instructions will keep your Windows 8.1 installation too, albeit I suppose you could also wipe out the Windows 8.1 partition completely and run Ubuntu only on the device. If the instructions are not followed carefully, you […]

January 18, 2015October 22, 2018 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Meet STMicro STM8S Based One Dollar Development Board

ESP8266 modules are $3 Wi-Fi boards targeting IoT applications that can be used in standalone mode, or connected to another MCU based board. But what if you don’t actually need Wi-Fi, but instead require a tiny board to control a few GPIOs? Arduino Pro mini can be used for this, but it costs about $10 on Sparkfun, and it’s certainly cheap enough for most projects. Switching to Aliexpress, you can get Arduino Pro mini clones for about $2, and a bit less in 10 pieces quantities. But you can get even cheaper and add a micro USB port with STMicro STM8S based boards that can be found for 5.5 CNY (Less than $1) on Taobao.com, or – once oversea shipping is factored in – about $1.60 to $1.70 on BuyInCoins, or Aliexpress without headers, and the version with headers sells for about $2 or more. Let’s check the board specifications: […]