Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Renesas RA8D1 Arm Cortex-M85 SoC features LCD display interfaces, 2D graphics accelerator

Renesas RA8D1 Arm Cortex-M85 SoC features LCD display interfaces, 2D graphics accelerator

Renesas RA8D1

Renesas RA8D1 is a new Arm Cortex-M85 microcontroller with graphics capabilities such as a 2D graphics accelerator and MIPI DSI and parallel RGB interfaces to connect an LCD that will make the chip suitable for HMI applications. Renesas introduced the world’s first Arm Cortex-M85 microcontroller with the RA8M1 just a few weeks ago, but the MCU has limited multimedia capabilities with just a 16-bit Capture Engine Unit (CEU) interface to connect a camera. The second member of the Renesas RA8 family fills this void with the RA8D1 microcontroller adding an LCD controller and a 2D graphics drawing engine on top of the CEU camera interface. Renesas RA8D1 specifications: MCU core – Arm Cortex-M85 clocked at 480 MHz with Helium MVE (M-Profile Vector Extension) with 32KB I/D caches, 12KB data flash Memory & Storage 1MB SRAM with TCM (128KB) 1MB to 2MB Flash memory 32-bit external SDRAM interface Display interfaces and […]

Posted on by Tomisin Olujinmi - 4 Comments on Lite3DP Gen 2 is a tiny, open-source resin 3D printer (Crowdfunding)

Lite3DP Gen 2 is a tiny, open-source resin 3D printer (Crowdfunding)

lite3dp gen 2 resin printer

The Lite3DP Gen 2 3D Printer builds on the success of its predecessor. With a new and improved design, an ESP32 microcontroller replacing the Arduino Pro Mini, and several other improvements, the Lite3DP Gen 2 is well-suited for making small, detailed resin prints. It is slightly bulkier than the Lite 3DP S1 3D printer but is still compact enough to fit into a bag. Gen 2 has been designed to maintain backward compatibility with the older model, and owners of existing Lite3DP printers can use the Gen 2 dev kit to upgrade their printers. The resin 3D printer is completely open-source (firmware, hardware, and software), and you can use the schematics, Gerber files, code, and other resources hosted in the GitHub repository to build a different kind of mSLA resin printer. Lite3DP Gen 2 key features & specifications: Electronics – All-in-one PCB with ESP32 microcontroller, high-res LCD, an ultra-silent TMC2209 […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Posted on by Sponsored Post - 2 Comments on JLCPCB now offers flex PCB manufacturing services starting at $15 (Sponsored)

JLCPCB now offers flex PCB manufacturing services starting at $15 (Sponsored)

Flexible PCB Stainless Steel Stiffener + FR4 Stiffener + 3M Tape Stiffener

JLCPCB, arguably the most popular and best PCB manufacturer in the community, has now started to offer a flex PCB manufacturing service with a special price starting at $15 and up to $54 coupon codes for new users. A flex PCB, also called flexible PCB or flexible printed circuit (FPC), is made by creating copper traces on a polyester or polyimide film and can used to fit into electronic products in the consumer, communication, medical, automotive, aviation, and military industries. Its main benefits are its flexibility so a flex PCB can arbitrarily be bent and moved replacing regular cables, especially on moving parts, and its size and light weight that allows them to be integrated with high reliability into products with a small form factor. JLCPCB supports flex PCBs from 8x12mm to 234×490 in size with the full JLCPCB flex PCB capabilities shown in the table below. Hardware engineers can […]

Posted on by Debashis Das - No Comments on ESP32 Qwiic Pro Mini is an ESP32 board in Arduino Pro Mini form factor

ESP32 Qwiic Pro Mini is an ESP32 board in Arduino Pro Mini form factor

Sparkfun's latest development board puts Espressif ESP32-PICO-MINI-02 on a compact Arduino Pro Mini footprint. It also includes an onboard QWICC connector for easy interfacing with a wide range of sensors and peripherals,

SparkFun’s latest development board, the ESP32 Qwiic Pro Mini, puts the Espressif ESP32-PICO-MINI-02 on a compact Arduino Pro Mini footprint. It also includes an onboard QWICC connector for easy interfacing with a wide range of sensors and peripherals. We have already covered other Sparkfun dev boards like DataLogger IoT, Datalogger IoT – 9DoF, and SparkFun Thing Plus Matter you can check those out if interested. Like any other ESP32 board, this also uses an ESP32 microcontroller which features a 32-bit dual-core processor, 520kB of SRAM, 2MB of PSRAM, 8MB of flash memory, and 16 kB of additional SRAM in its RTC. It supports Bluetooth 4.2 and BLE and has ADC and DAC, touch detection, PWM, TWAI, Ethernet MAC, UART, SPI, SDIO, I2C, and I2S interfaces. As reported in a Hackster article, the board also features a Qwiic Connector for solderless connections to sensor boards and add-ons, positioned at a 90-degree angle […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on GEEKOM Mini IT12 Core i7-12650H mini PC review – Part 1: unboxing, teardown, and first boot

GEEKOM Mini IT12 Core i7-12650H mini PC review – Part 1: unboxing, teardown, and first boot

GEEKOM Mini IT12 Review

GEEKOM Mini IT12 is a 12th Gen Intel mini PC offered with either an Intel Core i7-12650H or Intel Core i5-12450H Alder Lake processor, support for up to 64GB RAM, up to 2TB NVMe SDD, HDMI 2.0 video outputs and high-performance ports such as USB4 and 2.5GbE. The mini PC is also equipped with a WiFi 6E and Bluetooth 5.2 wireless module and comes preloaded with Windows 11 Pro operating system. GEEKOM has sent us a sample of the Mini IT12 with a 10-core Intel Core i7-12650H processor, 32GB DDR4, and a 1TB M.2 SSD for review.  We’ll start the review by listing the specifications, before going and unboxing and a teardown, and finally boot the device to Windows 11 Pro. This will be followed by detailed reviews of the mini PC with Windows 11 and Ubuntu 22.04 in the next few weeks. GEEKOM Mini IT12 specifications SoC – Intel […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Mixtile Core 3588E development kit review – Part 1: Unboxing and first boot

Mixtile Core 3588E development kit review – Part 1: Unboxing and first boot

Mixtile Core 3588E development kit review

Mixtile Core 3588E is a Rockchip RK3588 SO-DIMM system-on-module with up to 32GB LPDDR4 and 256GB eMMC flash that follows NVIDIA Jetson Nano, TX2 NX, Xavier NX, and Orin Nano form factor and should work with any board made for Jetson SO-DIMM modules. We first covered the module last April, but Mixtile is now shipping their Rockchip RK3588 module and sent us a development kit with the Mixtile Core 3588 SoM fitted with a fansink and a carrier board that looks quite similar to the NVIDIA Jetson Nano developer kit we reviewed a few years ago, although its design is closer to the new B01 developer kit as we’ll see below.  We’ll start the review with an unboxing and first boot, before testing it in more detail with Ubuntu 22.04 in the second part of the review. Mixtile Core 3588E development kit unboxing We received the development kit fully preassembled. […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on by Jean-Luc Aufranc (CNXSoft) - 21 Comments on Lichee Console 4A RISC-V mini laptop sells for $252 and up

Lichee Console 4A RISC-V mini laptop sells for $252 and up

Sipeed Lichee Console 4A

Sipeed Lichee Console 4A is a RISC-V portable Linux console, that I would also call a RISC-V mini laptop, powered by an Alibaba T-Head TH1520 quad-core C910 processor and equipped with up to 16GB RAM and 128GB eMMC flash. We first covered the device last August, but Sipeed had started taking pre-ordered by the end of October, and they’ve gone through the first batch of mass production, and should soon ship the mini laptops with the Aliexpress store showing December 31 as the release date, and we’re told some samples may have already been shipped in the first part of the month. Lichee Console 4A specifications: SoM – Replaceable Lichee LM4A system-on-module based on TH1520 quad-core RISC-V C910 processor with up to 16GB LPDDR4X, 128GB eMMC flash Storage – MicroSD card slot, M.2 SSD support Display – 7-inch 1280 x 800 LCD with capacitive touch Video Output – 1x mini […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on $14 Pimoroni NVMe Base adds an M.2 PCIe socket underneath the Raspberry Pi 5 SBC

$14 Pimoroni NVMe Base adds an M.2 PCIe socket underneath the Raspberry Pi 5 SBC

Pimoroni NVMe BASE

Pimonori has started to take pre-orders for the NVMe BASE add-on board that adds an M.2 PCIe socket underneath the Raspberry Pi 5 SBC with support for M.2 NVMe SSDs and M.2 AI accelerators with 2230, 2242, 2260, or 2280 sizes. It’s not the first M.2 expansion board for the Raspberry Pi as the PineBerry Pi HatDrive TM1 and BM1 add-on boards launched last month can also do that either on top of on the bottom of the Raspberry Pi, but the NVMe BASE is quite cheaper at just 13.50 GBP inc. VAT or $14.29 ex. VAT at the time of writing. NVMe Base key features and specifications: NVMe Base PCB M.2 M-key slot Holes for 2230, 2242, 2260, and 2280 sized M.2 modules Raspberry Pi FFC PCIe connector ‘PCIe Pipe’ Flat Flex Cable M2 bolt and 2x nuts for SSD mounting 4x 7mm M2.5 standoffs for base mounting 8x […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications