CNX Software - Embedded Systems News

April 28, 2020May 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

NANOTE 7″ 2-in-1 Mini Laptop with Intel Atom X5 Processor to Launch for $185 in Japan

Mini laptops have been a thing for the last 2 or 3 years thanks to companies such as GPD and OneNote. However, most of the models rely on fairly powerful and expensive low-power processors from Comet Lake and Amber Lake families, and that may be fine if you want a versatile, ultra-portable machine as your main driver, but not everybody wants to spend $700-$1,000 on this type of device. In the recent past, we’ve seen a couple of cheaper Intel Cherry Trail mini laptops such as Pretech F700mi and Peakago. But the former does not appear to be for sale, and the latter was offered for $269 and the company decided to upgrade it to an Intel Celeron N4100 processor. Peakago is still not available, as Indiegogo backers are still waiting for their perks. So if you’re looking for an entry-level mini laptop NANOTE appears to be a better option as […]

April 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ESP32-Korvo AI Development Board Leverages ESP-Skainet Voice Assistant

Last September, Espressif Systems unveiled ESP-Skainet voice assistant optimized for ESP8266 and ESP32 wireless SoC with support for WakeNet wake word engine and MultiNet speech commands recognition with the former requiring just 20KB RAM for one word, and the latter supporting up to 100 offline commands as long as you had 4MP SPI flash or more. At the time, it only supported the Chinese language and worked on the upcoming “LyraT-Mini audio board“, now available for $26.99 shipped but only including one microphone. Espressif Systems has now announced a better AI development board with ESP32-Korvo AI development board includes featuring a mainboard with ESP32 processor and an audio ADC, and a subboard equipped with a 3-mic array, RGB LEDs, and various buttons. ESP32-Korvo specifications: Mainboard Wireless module – ESP32-WROVER-B with ESP32 dual-core Wi-Fi / BT processor, 128 Mbit SPI flash, and 64 Mbit PSRAM Storage – MicroSD card slot Audio […]

April 27, 2020April 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

$9 Ebyte E180-ZG120B-TB Zigbee 3.0 Evaluation Board Features Silicon Labs EFR32MG1B Zigbee/Thread SoC

Ebyte E180-ZG120B-TB is a Zigbee 3.0 evaluation/development board based on the company’s E180-ZG120B module itself powered by Silicon Labs EFR32MG1B Series 1 Zigbee/Thread Arm Cortex-M4 SoC. Ebyte E180-ZG120B-TB specifications: Zigbee Module – Ebyte E180-ZG120B powered by Silabs EFR32MG1B Arm Cortex-M4 @ 40 MHz with 256 KB flash, 32KB SRAM; IPEX antenna connector; dimensions: 18 x 11.5mm Connectivity 2.4GHz Zigbee 3.0 & Thread Tx Power: 18 to 20dBm Range up to 1.3 km USB – 1x Micro USB port for power and programming via CP2102G serial chip Expansion 2x 14-pin headers plus 9-pin header giving access to module I/Os including GPIO, UART, PWM, ADC, TouchLink, Wake, RESET, DBG, 3.3V, and GND 6-pin header for power, 1x UART for CP2102G, 1x UART for module; Fitted with 3 jumpers by default to connect both Tx/Rx, as well as 3.3V power pins. Removing the jumper should allow you to connect directly to the module, […]

April 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Banana Pi BPI-F2P Industrial Control Board Adds PoE, RS-232 and RS-485 Interfaces

At the end of Last year, we covered Banana Pi BPI-F2S Industrial SBC powered by Sunplus SP7021 “Plus1” SoC with four Cortex-A7 core, an Arm A926 microprocessor, an 8051 core, as well as 128MB to 512MB built-in DDR3 RAM. The company has now unveiled Banana Pi BPI-F2P with the same processor and many of the same features, but with the addition of PoE support on one of the Fast Ethernet ports, as well as an RS-232 DB9 connector, and RS-485 terminal blocks. The expansion connector for an FPGA board found in BPI-F2S is however gone. Banana Pi BPI-F2P specifications: SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM. Storage – 8GB eMMC flash, microSD card slot Video Output – HDMI 1.4 output Camera I/F – MIPI CSI connector Connectivity – […]

April 26, 2020April 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Ingenic T31 AI Video Processor Combines MIPS & RISC-V Cores

Ingenic T31 MIPS & RISC-V Video Processor

Last week we asked “is MIPS dead?” question following the news that Wave Computing had filed for bankruptcy, two MIPS Linux maintainers had left, and China-based CIP United now obtained the exclusive MIPS license rights for mainland China, Hong Kong, and Macau. Ingenic is one of those Chinese companies that have offered MIPS-based processors for several years, but one commenter noted that Ingenic joined the RISC-V foundation, and as a result, we could speculate the company might soon launch RISC-V processors, potentially replacing their MIPS offerings. But Ingenic T31 video processor just features both with a traditional Xburst MIPS Core combines with a RISC-V “Lite” core Ingenic T31 specifications: Processors XBurst 1 32-bit MIPS core clocked at 1.5GHz with Vector Deep Learning accelerator based on SIMD128, 64KB + 128KB L1/L2 Cache RISC-V independent lite core System Memory – Built-in 512Mbit (64MB) or 1Gbit (128MB) DDR2 Storage – Quad SPI flash, […]

April 25, 2020April 25, 2020 by Jean-Luc Aufranc (CNXSoft) - 47 Comments

Ampere eMAG 64bit Arm Workstation Enables Native Arm Development

Over the last few years, several companies have come up with 64-bit Arm workstation to allow developers to test Arm code natively which may be important to avoid network delays or test applications requiring video or graphics. Those started to become available in 2018 from the relatively low-end 24-core Cortex-A53 Linaro “Synquacer” Developerbox to the much more powerful (and expensive) GIGABYTE ThunderXStation Workstation powered by up to two 32-core ThunderX2 processors. In the fall of 2019, SolidRun started to ship HoneyComb LX2K 16-core Arm Workstation motherboard with and NXP LX2160A 16-core Cortex-A72 processor that offers significantly more performance than the Linaro Box at a reasonable price ($750). While reading a recent Anandtech post with photos of an engineering sample, I found out Avantek was also offering the Ampere eMAG 64bit Arm Workstation powered by an Ampere eMAG 8180 32-core server processor. Ampere eMAG 64-bit Arm workstation specifications: SoC – Ampere […]

April 24, 2020April 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

Raspberry Pi 4 vs ODROID-C4 Features Comparison

Yesterday, Hardkernel launched ODROID-C4 Amlogic S905X3 SBC as an update to ODROID-C2 SBC launched in 2016. We’ve seen the board can compete with Raspberry Pi 4 4GB board thanks to benchmarks released by Hardkernel, but since those boards are so versatile, meaning they can be used in a variety of applications, it’s impossible to benchmark all use cases. One way to find out which board might be right for your application without going through benchmarks is to look at a list of features for each, and that’s exactly what we’ve done in this post. Let’s get straight to the Raspberry Pi 4 (4GB RAM) vs ODROID-C4 comparison table. Features/Specs Raspberry Pi 4B (4GB) ODROID-C4 Release date 24th June 2019 23rd April 2020 SoC Broadcom BCM2711 quad-core Cortex-A72 @ 1.5 GHz (overclockable to 2.0+ GHz) with NEON, FPU Amlogic S905X3 quad-core Cortex-A55 processor @ 2.0 GHz with NEON, FPU, Armv8 Crypto […]

April 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Smart Tweezers Colibri ST-5S Integrates LCR Meter, Identifies SMD Components

Soldering SMD components normally require a pair of tweezers, and since those components are so small it may be hard to read the value on them if any. That means if you’d like to double-check the value of an SMD component you may have to use a multimeter first, before placing it on the board and solder it. There’s a better way: Ideal-Tek Smart Tweezers Colibri ST-5S with a built-in LCR meter that can help you automatically identify SMD components and read their values in a convenient tweezers form factor. Smart Tweezers Colibri ST-5S key features & specifications: Built-in high-precision LCR probe Display – OLED Display Ranges Resistance (R) – 0.05 Ohm to 9.9 MOhm Capacitance (C) – 0.5 pF to 4999 uF Inductance (L) – 0.5 uH to 999 mH Quality Factor (Q) – 0.001 to 1,000 Dissipation Factor (D) – 0.001 to 1,000 AC test mode Test frequency […]