Posted on

Waveshare RP2040-PiZero – A Raspberry Pi RP2040 board with Raspberry Pi Zero form factor

Waveshare RP2040-PiZero board is a Raspberry Pi Zero lookalike that features a Raspberry Pi RP2040 microcontroller instead of a Linux-capable application processor. But RP2040 board comes with the same layout as the Raspberry Pi Zero and similar ports including two USB Type-C ports, a mini HDMI/DVI connector, a microSD card slot, and a 40-pin GPIO header, but also adds support for LiPo batteries with a 2-pin connector and a charging circuit. RP2040-PiZero specifications: MCU – Raspberry Pi RP2040 dual-core Cortex M0+ microcontroller @ 133 MHz with 264 kB of embedded SRAM Storage – 16MB SPI flash, microSD card slot Video – Mini HDMI port that can output DVI signals USB – 1x USB Type-C port for data using PIO-USB host/device implementation Expansion – 40-pin color-coded header with 2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x PWM, 8x Programmable I/O (PIO) state machines for custom peripheral support Misc – […]

Posted on

GigaDevice GD-xD-W515-EVAL board features GD32W515 Cortex-M33 MCU, a fingerprint scanner, and an LCD module

GigaDevice GD-xD-W515-EVAL is a new “all-in-one” Cortex-M33 evaluation kit comprised of a GD32W515 mainboard, a fingerprint board, and an LCD board powered by either a battery or the Mini-USB interface of the GD-Link programmer. The devkit is mainly used to evaluate various chips from the company, namely the 180 MHz GD32W515PIQ6 Cortex-M33 microcontroller, the GD25Q128E SPI NOR flash, the GSL6157 capacitive fingerprint Sensor, the GD30BC2416 battery management IC, and the GD30LD1002 power management chip. GigaDevice GD-xD-W515-EVAL board specifications: MCU – Gigadevice GD32W515PIQ6 Core – Arm Cortex-M33 microcontroller clocked at up to 180 MHz with Arm TrustZone support Memory – 448KB SRAM Storage – 2048KB flash Wireless – 2.4 GHz WiFi 4 (802.11b/g/n), but somehow not used in the development board… I/Os – Up to 43x GPIOs, 3x USART, 2x I2C, 2x SPI, USB 2.0 FS, I2S, etc… Package – QFN56 Storage – 128Mbit SPI NOR Flash (GD25Q128E) Display – 0.96-inch […]

Khadas Edge2 Arm mini PC
Posted on

Barebone M4 fanless mini PC features Intel Processor N100 for $106 and up

I thought it would be hard to beat the price of the Processor N100 ZX05 mini PC, but the Topton M4 fanless mini PC does just that for just $106.53 plus shipping. The trick for that price is that the M4 is a barebone mini PC without any RAM, storage, or wireless module, but some may see it as an advantage preferring to purchase RAM, storage, and/or a WiFi module separately, or simply having the ability to replace or upgrade them when needed. M4 mini PC specifications: SoC – Intel Processor N100 Alder Lake-N quad-core/quad-thread processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – Up to 32GB (TBC) DDR4-3200 via SO-DIMM socket Storage 1x M.2 2280 socket for NVMe (PCIE3.0 x2) or SATA III SSD 1x mSATA socket SATA III port for up to 7mm […]

Posted on

UP Squared i12 Edge is a compact, yet feature-rich, fanless Alder Lake-P mini PC

UP Squared i12 Edge is a compact fanless mini PC powered by 12th Generation Intel Alder Lake-P processors from the Celeron 7305E penta-core CPU up to an Intel Core i7-1270PE 12-core processor, but still a good range of ports and features. Based on the UP Squared i12 SBC introduced earlier this year, the UP Squared i12 edge mini PC comes with up to 16GB LPDDR5 RAM and features a 64GB or 128GB SSD soldered on board, plus an M.2 2280 NVMe socket and a SATA port for additional storage. The system also has two gigabit Ethernet ports, optional WiFi and Bluetooth, three 4K-capable display interfaces (HDMI, DisplayPort, USB-C), and three USB 3.2 Gen 2 ports. UP Squared i12 Edge specifications: 12th generation Alder Lake-P SoC: Intel Core i7-1270PE 12-core/16-thread processor @ up to 3.30GHz (E-cores) / 4.50GHz )P-cores) with 96EU Intel Xe graphics – PBP: 28W, up to 64W MTP […]

Posted on

GL.iNet Flint2 AX6000 router supports up to 900 Mbps WireGuard VPN with MediaTek MT7986 SoC

GL.iNet Flint2 (also known as GL-MT6000) is a new AX6000 router based on MediaTek MT7986 (Filogic 830) Arm SoC and supporting VPN speeds of up to 900 Mbps using WireGuard and 190 Mbps with OpenVPN. This caught my attention, as I previously covered other GL.iNet routers such as the Spitz AX (GL-X3000NR) and the Beryl AX (GL-MT3000) based on the previously generation Filogic 820 (MT7981B) CPU with claims of (only) 300 Mbps transfer rates with Wireguard, so the new model is supposed to triple the VPN performance. GL.iNet Flint2 (GL-MT6000) specifications: SoC – MediaTek MT7986 (Filogic 830) quad-core Arm Cortex A53 processor @ 2.0 GHz with hardware acceleration engines for Wi-Fi offloading and networking System Memory – 1GB DDR4 Storage – 8GB eMMC flash Networking 2x 2.5 Gbps Ethernet ports 4x Gigabit Ethernet LAN ports 802.11b/g/n/ac/ax WiFi 6 with 4x external Wi-Fi antennas Up to 1,148 Mbps @ 2.4 GHz […]

Posted on

Inkplate 4 TEMPERA ePaper display supports ESPHome, Arduino, and MicroPython (Crowdfunding)

Years after years, Soldered Electronics keeps on churning out new ESP32-powered ePaper displays and the latest model is the Inkplate 4 TEMPERA with a recycled 3.8-inch e-paper touchscreen with 600×600 resolution and plenty of sensors and features for a device of that size. The InkPlate 4 TEMPERA comes with a frontlight, a gyroscope, an accelerometer, temperature, humidity, air quality, and gesture sensors, Wi-Fi and Bluetooth connectivity, a built-in battery, and a low-power operating mode. Inkplate 4 TEMPERA specifications: Wireless module – ESP32-WROVER-E with ESP32 dual-core microcontroller with Wi-Fi 4 & Bluetooth 4.0 connectivity Memory – 8MB PSRAM Storage – 4MB flash PCB antenna Storage – MicroSD card slot Display (ED038TH2) 3.8-inch 3-bit grayscale (black, white, and six shades of gray) ePaper display with 600 x 600 pixels resolution Refresh rate 0.18s partial refresh rate in 1-bit (B&W) mode 0.86s full refresh mode in either 1-bit or 3-bit modes Multi-point touchscreen […]

Intel Arc Graphics Technology
Posted on

ZX05 mini PC with Processor N100 CPU, 12GB RAM goes for $133 and up

ZX05 is another Intel Processor N100 Alder Lake-N mini PC whose main selling points are its PC stick-like size (145 x 62 x 20mm) and its price with the device selling for $132.62 and up on AliExpress with 12GB RAM and an M.2 2280 socket for an NVMe SSD. Despite its dimensions, the pocket-sized PC comes with two HDMI ports, three USB 3.2 Gen 1 ports, gigabit Ethernet, WiFi 5 and Bluetooth 5.2, and an audio jack which should cover most basic computing use cases. ZX05 specifications: SoC – Intel Processor N100 Alder Lake-N quad-core/quad-thread processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – 12GB LPDDR5 soldered-on board Storage – Optional 128GB, 256GB, 512GB, or 1TB NVMe SSD via M.2 2280 socket Video Output – 2x HDMI 2.0 ports up to 4Kp60 Audio – 3.5mm […]

Posted on

Arduino GIGA R1 WiFi board gets touchscreen display shield

The Arduino GIGA Display Shield is a 3.97-inch RGB touchscreen display designed for the Arduino GIGA R1 WiFi board introduced a few months ago with an STM32H7 dual-core Cortex-M7/M4 microcontroller and a Murata 1DX module for WiFi 4 and Bluetooth 5.1 connectivity. Besides featuring an 800×480 touchscreen display, the new shield offers some other features such as an MP34DT06JTR digital microphone, a Bosch BMI270 six-axis IMU, a 20-pin Arducam camera connector, and an RGB LED. Arduino GIGA Display Shield (ASX00039) specifications: Display – 3.97-inch touchscreen display with 800×480 resolution (model: KD040WVFID026-01-C025A),  16.7 million colors, 5-point touch, connected over I2C Camera I/F – 20-pin ArduCam camera connectors Sensors Bosch SensorTech BMI270 6-axis IMU with 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer STMicro MP34DT06JTR MEMS microphone Misc -1x RGB LED (I2C) Supply Voltage – 3.3V Dimensions – 106 x 80 mm The new shield can be mounted to the GIGA R1 […]

Khadas VIM4 SBC