CNX Software - Embedded Systems News

November 6, 2019 by Karl Johnson - 1 Comment

Quick Update for the AnyCubic Photon S Photon Workshop V2.1.17.RC1

Just last week I did the first part of the review of the Anycubic Photon S. One of the pain points of printing was the long workflow. Chitubox Prusa slicer Photon File Validator Photon Workshop First thing I have to decide is if the model needs to be hollowed to conserve resin. I load up the model in Chitubox and use the built-in tool to hollow the model. After the models hollowed and a drain hole is placed I export it to an STL and open with Prusa Slicer. In Prusa Slicer, I orient the model and use its auto-support feature and auto-orient feature. It is a roll of the dice if the orientation makes sense. I want all the supports to be on the back/bottom of the print. Little marks are left when removing the supports. I have found that Prusa Slicer has the best auto support feature. Then […]

November 6, 2019November 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

$1,000 Microsoft Surface Pro X Tablet is Powered by Microsoft SQ1 Arm Processor

Arm Windows 10 laptops, tablets, and 2-in-1 hybrids have been around for a couple of years all powered by Qualcomm Snapdragon processors so far. Now Microsoft is launching Surface Pro X Windows 10 tablet powered by its own Microsoft SQ1 Arm processor. It sells for $999 with 8GB RAM, 128GB storage, and a 13″ 2880 x 1920 x pixel touchscreen display in the default configuration, but you can also customize your order with up to 16GB RAM, 512GB SSD storage, optional keyboard and stylus for over $2,000. Microsoft Surface Pro X Specification Microsoft Surface Pro X specification: SoC – Microsoft SQ1 Arm processor @ 3.0 GHz with Adreno 685 GPU System Memory – 8GB or 16GB LPDDR4x RAM at 3733Mbps (option for 16GB) Storage – Removable 128, 256, or 512GB M.2 SSD Display – 13” PixelSense Display with 2880 x 1920 resolution (3:2 aspect ratio), 10 point multi-touch, 450 nits […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

November 6, 2019November 8, 2019 by Jean-Luc Aufranc (CNXSoft) - 191 Comments

Giveaway Week – MINIX NEO S1 USB-C Hub with 120GB built-in SSD

MINIX NEO S1 & S2 USB-C hubs come with either 120 or 240 GB SSD storage, as well as an HDMI output, 2x USB 3.0 ports, and a USB-C port for power. I reviewed MINIX NEO S2 in details with an SBC running Ubuntu 18.04, and plan to keep it for future reviews, but since I also received MINIX NEO S1, I’ll be given it away for free to one of my readers as part of Giveaway Week 2019. While the device is designed for Apple Macbook Air and Apple Macbook Pro, it should work with any computer or board with a USB-C port with DisplayPort Alternate mode provided you want to use the HDMI output port. An extra USB-C power supply is optional, but I’ve found out it’s mostly required if you’ve going to connect one or more USB 3.0 hard drive to the hub. This item is new, […]

November 6, 2019 by Stephen Vicinanza - No Comments

YABA is a Backplane Architecture Controller for Automation and IIoT (Crowdfunding)

Automation and IIoT Through YABA YABA is an acronym and a concept being developed. The acronym is Yet Another Backplane Architecture (YABA). The concept is to bridge the gap between PLC/PAC and open source hardware. The YABA Bridge to IoT YABA is designed to be a robust, open hardware controller that will be a simple but effective midpoint or bridge to the approach of modern industrial technologies in the automation and IoT sector, especially production lines in industrial settings. Where YABA is in Process The process is midstage right now, with a prototype coming. There is an IndieGoGo campaign, but it is at the development stage right at this moment. The developer has reported that the team is about two months out of a working prototype, which should put them an efficient schedule timeline. The project has the backplane, CPU, I/O boards at about 75% complete, and just working towards […]

November 5, 2019November 5, 2019 by Karl Johnson - No Comments

How to install Duet 2 Maestro Board on HE3D K280 3D Printer

Quite a while ago I reviewed the HE3D K280 delta 3D printer. Up until now, I did no mods other than the ones that I completed during the initial build. I have been very happy with it with the exception of the noise caused by inexpensive drivers and the salmon skin due to the drivers as well. The K280 prints big and pretty accurate at modest speeds. Today I am outlining how I upgraded to a Duet 2 Maestro mainboard. With this upgrade, I am jumping from an 8-bit board with generic drivers to a 32-bit board with TMC2224 drivers. The upgrade was quite painless and straightforward but not without a few hiccups. The Maestro is Duet’s entry-level board for about $130. I attempted the Bigtreetech SKR 1.3 with TMC2130’s but the firmware wasn’t quite there yet. I opened an issue on Marlin’s GitHub page which explains the issue in […]

November 5, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Intel Gemini Lake Refresh Family Announced with 6 new Processors

Intel Gemini Lake processors were first introduced in 2017, and we’ve gotten some interesting low-power mini PCs as well as SBCs such as ODROID-H2, albeit it was not with troubles since the processors were unavailable for several months. Production of Gemini Lake processors resumed a few months ago, and now the company has announced Gemini Lake Refresh family with 6 new processors. This includes three 6W mobile “N-series” processors… … and three 10W desktop “J-series” processors. Since those are “refresh” processors each new part improves on existing SKU’s with increased frequencies as noted by Liliputing. See the list of Gemini Lake and Gemini Lake Refresh processors below with the latter highlighted in bold. Celeron N4000 – Dual-core processor @ 1.1 GHz (base) /2.6 GHz (boost) Celeron N4020 – Dual-core processors @ 1.1 GHz /2.8 GHz Celeron N4100 – Quad-core processor @ 1.1 GHz /2.4 GHz Celeron N4120 – Quad-core processor […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

November 5, 2019November 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 82 Comments

Giveaway Week – WisCellular NB-IoT & eMTC GPS Tracker

Rak Wireless WisCellular is an NB-IoT & eMTC Arduino shield based on Quectel BG96 module with 2G fallback that is similar to the company’s previous-generation WisLTE board, except it is certified for the global markets. I received a beta sample last year and went through the instructions to use it with a Hologram SIM card, but sadly I never managed to make it work, and eventually learned the Hologram SIM card did not support NB-IoT in Thailand. So I would have had to buy a local SIM card, but at the time, they didn’t sell those, and the only way to get an NB-IoT SIM card was to buy a development kit. Before going ahead with the purchase, I asked about coverage in my area but never managed to get a definitive answer so I gave up. So instead of keeping it in a drawer at home, I’d better just […]

November 5, 2019 by Stephen Vicinanza - No Comments

AuverCare is a Predictive AI 24/7 Monitor for Patients and Elderly

Information on the Internet for Monitoring Patients and Elderly If you are in the healthcare field or caring for an elderly or disabled person, you know all about trying to keep them safe. The internet is crowded with camera and audio monitors, wearable fall alert alarms, and the emergency services connected panic button. All these devices have one problem, they only work after there is a problem. What is Predictive AI? There has been a great deal of chatter since the 2016 announcement of a future predicting AI platform. The article reported on this platform was Predicting the Future – especially use cases such as falls by the elderly. With the advances in the field of AI and object recognition and behavior that is based on data gathered from a variety of sensors, it is not really a stretch to see a predictive healthcare monitor come onto the scene. Predictive […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications