CNX Software - Embedded Systems News

August 21, 2019August 21, 2019 by Jean-Luc Aufranc (CNXSoft) - 35 Comments

Khadas VIM3L Amlogic S905D3 SBC Targets HTPC Enthusiasts

Khadas recently launched VIM3 single board computer powered by Amlogic A311D that delivers the best performance among Arm-based SBC’s I have tested myself, and for instance, Amlogic A311D is significantly faster than Rockchip RK3399, and the platform is quite suitable for Android gaming. All that power comes at a price however, as Khadas VIM3 starts at $99.99 with 2GB RAM and 16GB storage. That’s fine if you’re going to leverage the features and power of the board, but for some applications, it’s quite expensive. One of those applications is HTPC, as in a world of sub-$50 TV boxes, $100 is a bit too much for watching video content. So the Khadas team is currently developing Khadas VIM3L based on Amlogic S905D3 processor that should provide an excellent platform for HTPC. Khadas VIM3L specifications known so far: SoC – Amlogic S905D3-N0N quad-core Cortex-A55 processor @ 1.9GHz with Arm Mali-G31MP2 GPU up […]

August 20, 2019July 27, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Toybrick TB-RK1808 AI Compute Stick is now Available for $86

Last May, we wrote about RK1808 AI Compute Stick, a USB stick with Rockchip RK1808 dual-core Cortex-A35 processor also featuring a 3.0 TOPS neural processing unit to accelerate AI workloads at low power. As I understood it, it was available for purchase, but you had to contact a Rockchip FAE by email in order to get one. Now, you can easily buy one online by getting the Toybrick TB-RK1808 AI Compute Stick on Seeed Studio for $86. Just ignore the “Core i3” in the title, we’ll see why it’s there further below. TB-RK1808 AI Compute Stick specifications: SoC – Rockchip RK1808 dual-core Cortex-A35 processor with NPU AI inference performance – 3 TOPS for INT8, 300 GOPS for INT16, 100 GOPS for FP16 System Memory – 1GB LPDDR Storage – 8GB eMMC flash Host Interface – USB 3.0 type-A port Power Supply – Via USB port Dimensions – 82 x 31 […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

August 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Sonoff S55 Waterproof WiFi Smart Sockets are Offered in Six Regional Variants

When WiFi smart sockets (aka smart plugs) started to appear a few years ago, they were often only available with either US or China plugs, and users from Europe, UK or other locales may have had to use an adapter instead. Since then, products that ship with multiple versions such as Sonoff S26 or Orvibo Wiwo S20 have launched in order to cater to more people around the world. ITEAD has now launched another WiFi smart socket, namely Sonoff S55, that’s designed to work outdoors thanks to IP55 ingress protection rating, and is offered in six different variants for Australia, Germany, France, the United States, South Africa, and the United Kingdom. Sonoff S55 specifications: Input/Output S55TPI(AU) – AC 100-240V 50/60Hz 10A Max S55TPF(DE) – AC 100-240V 50/60Hz 16A Max S55TPE(FR) – AC 100-240V 50/60Hz 16A Max S55TPB(US) – AC 125V 50/60Hz 10A Max S55TPD(ZA)- AC 100-240V 50/60Hz 10A Max S55TPG(UK) […]

August 20, 2019August 20, 2019 by Siji Sunny - 5 Comments

mDash Cloud platform for IoT Devices Targets ESP8266/ESP32, STM32, and TI CC3220 Wireless MCUs

Cesanta (a company based in Dublin, Ireland) recently launched mDash – an IoT cloud platform for administration of various IoT modules. This platform supports Espressif’s modules ESP32 & ESP8266, STM32 (L4,M4) and TI CC3220, and offers a bunch of features which are known to be challenging tasks in the IoT world. This includes OTA (Over-The-Air) firmware updates, remote configuration and administration, alerts and notifications, remote device control and file management. This can be achieved through 3 programming platforms – Arduino IDE, ESP-IDF and through Mongoose OS. For evaluation and testing purpose mDash offers a simulator that run as a docker container. Refer our previous post, to understand how to get started with Cesanta’s Moongoose OS for ESP8266. Basic WorkFlow mDash Library The company offers reference firmware/library for the defined hardware platforms. This been implements by using secure MQTT for communication, re-connection and initial provisioning with mDash cloud. You can find […]

August 19, 2019August 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Socionext 24 GHz Radar Sensor for IoT Measures Distance and Angle (Video)

Last year, we wrote about Socionext MN87900 24 GHz radio wave radar module for IoT with Rx & Tx antennas and a crytal unit that measured just 12×7 mm. The module is made for IoT equipments, security systems, smart home appliances, autonomous vehicles and drones, medical devices, and more. Basically any application that requires distance measurement up to 8 meters (expandable to 30 meters with a radome horn), rough location, or motion detection may leverage the technology. The company has now uploaded a video showing a demo of their 24 GHz radar sensor. Socionext did not explain which exact solution they used, and it’s probably not the full module above, but either one of their sensors based on the link provided in the video description: SC1232AR3 – All-in-one RADAR sensor for Entry Motion & Distance Detection SC1233AR3 – All-in-one RADAR sensor for Entry Motion & 2D Detection I suspect SC1232AR3 […]

August 19, 2019August 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 43 Comments

Allwinner R328 Smart Speaker & System-on-Module Spotted in China

Earlier this year, Allwinner introduced some AIoT (AI + IoT) processors including Allwinner R328 dual-core Cortex-A7 processor for “low-cost voice interaction solutions” aka low-cost smart speakers. I did not pay too much attention at the processor at the time, but since then, the company has released a product brief with some more details about the processor. We can see it integrates 64MB to 128MB DDR3 memory which should be enough to run Linux without external memory, and truly provide a low-cost solution for smart speakers, and I was told the chip may cost around $3. I was also asked whether Allwinner R328 smart speakers were already shipping. A Google search in English did not help, so I had to switch to Chinese, and after visiting several sites, I could see some Allwinner A328 platforms including a smart speaker and a system-on-module were showcased at some event in China. We’ve got […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

August 19, 2019August 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Onenuts Nut 9 TV Box Runs Android TV, Doubles as a Smart Speaker

We’ve previously covered HF10 2-in-1 Android speaker and TV box that looks more like a speaker than a TV box, and since we’ve posted about it several years got improved to work as a smart speaker supporting Amazon Alexa. If you’re a distributor looking for something with the same functionalities, but in a more compact TV box form factor, Shenzhen Tomato got you covered with their Onenuts Nut 9 TV box that works as a traditional TV box running Android TV 7.1, as well as a smart speaker with support Google Assistant even when the TV is off thanks to a built-in microphone and a speaker placed on the bottom of the enclosure. Onenuts Nut 9 specifications: SoC – Amlogic S905X Arm Cortex-A53 processor up to 1.5GHz with penta-core Mali-450MP GPU up to 750Mhz+ System Memory – 2GB DDR3 Storage – 16GB eMMC flash, micro SD card slot Video Output – […]

August 18, 2019August 17, 2019 by Tiwalade Joanna Okedara - 4 Comments

RAKWireless Introduces RAK7200 LoRa Tracker | Features & Specifications

RAK7200 is a LoRa Tracker node built around the AcSIP S76G chip. It integrates the ultra-low-power STM32L073 micro-controller, the SX1276 LoRa long range modem, and the CXD5603GF GPS receiver. The RAK7200, being a fully functioning LoRaWAN device, is particularly suited for IoT applications. Such as asset tracking, smart vehicle management, location-based service, etc. According to the device manufacturers, RAKWireless, a leading Chinese IoT solutions company, based in Shenzhen, RAK7200 requires minimal setup. Just pop in the included battery, close the housing and you can start sensing your GPS data over LoRaWAN. Furthermore, there are sensors built-into the board: a 9-axis accelerometer and pressure sensor. The new GPS Tracker node is an upgrade over the company’s earlier offering in the GPS tracker space, the RAK7205. Now, the earlier version, the RAK7205, was mostly aimed at developers, with its larger more robust casing and solar panel. But the RA7200 is more of […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications