CNX Software - Embedded Systems News

February 7, 2018June 15, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Shuttle DL10J Fanless Gemini Lake Mini PC Features Intel Celeron J4005 Dual Core Processor, 3 Video Outputs

Several mini PCs based on Intel Gemini Lake processors were unveiled at CES 2018, including Zotac PICO PI226, MeLE PCG63-APL4, and ECS LIVA Gemini Lake models all of which slated to launch in Q2 2018. ASRock and GIGABYTE also announced Gemini Lake motherboards a few weeks later. Most of the products above are for the consumer market, but if you’re after a Gemini Lake mini PC more geared towards business use cases like digital signage and multi-display solutions, Shuttle is now showcasing their DL10J mini PC powered by an Intel Celeron J4055 Gemini Lake dual core processor, and offering 3 video output ports at Integrated Systems Europe 2018 (ISE 2018). Shuttle DL10J mini PC specifications: SoC – Intel Celeron J4005 dual core GLK processor @ 2.00/2.70 GHz with 12EU Intel UHD Graphics 600; 10W TDP System Memory – 2x DDR4 slots @ 2133 MHz up to 8GB Storage – 1x […]

February 6, 2018February 17, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

MicroSemi ZL38063 Audio Processor is Designed for Microphone Arrays

I’ve already been experimenting with DIY smart speakers and corresponding services for example using ReSpeaker board with Microsoft Bing Speech API, or Orange Pi Zero with Google Assistant SDK. But so far all the hardware platforms I used only came with one microphone, no microphone array that help with wake word detection in noisy environments. Last week-end, I received Espressif Audio Mic HDK, an ESP32 board with a 3-microphone array which I’ll review a in a few weeks once documentation becomes available and I clear some other items in my review list. In the meantime, I checked out the hardware, and found out the mainboard also comes with Microsemi ZL38063 audio processor specifically designed for microphone array. The chip was released las year, and can be already found in the company’s AcuEdge Development Kit for Amazon AVS, but since I’m going to use a board based on ZL38063 I’d thought […]

February 6, 2018February 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Hardkernel Unveils ODROID-N1 Board with Rockchip RK3399 Processor, 4GB RAM, Dual SATA, and More

It’s official, there’s a bubble of Rockchip RK3399 boards announcements or launches in early 2018. After AAEON RICO-3399, Orange Pi RK3399, and Pine64 RockPro64, which add to 96Boards compliant Rock960 announced a couple a months ago, and which may launch in Q1 2018, Hardkernel has now announced they’ve been working on ODROID-N1 board. ODROID-N1 board specifications: SoC – Rockchip RK3399 hexa-core processor with a dual-core Arm Cortex-A72 @ 2GHz, a quad-core Arm Cortex-A53 @ 1.5Ghz, and a Mali-T860MP4 GPU that supports OpenGL ES1.1/2.0/3.0, OpenCL 1.2 System Memory 4Gbyte DDR3-1866 RAM, Dual channel interface for 64bit data bus width Storage – eMMC 5.0 (HS400) flash storage, UHS capable micro-SD slot., 2x SATA3 ports using, native SATA implementation via PCIe-gen2 to SATA3 interface Video Output – HDMI 2.0 for 4K display Connectivity – Gigabit Ethernet port USB – 2x USB 3.0 host ports, 2x USB 2.0 host port. Expansion – 40-Pin GPIO […]

February 6, 2018February 7, 2018 by Ian W MORRISON (Linuxium) - 4 Comments

Vorke V1 Plus Celeron J3455 Mini PC Review with Windows and Ubuntu

Most Intel based mini PCs use processors classified as ‘Mobile’ as these have lower thermal design power (TDP) ratings which is the maximum amount of heat generated by the processor: However, the new Vorke V1 Plus has incorporated a ‘Desktop’ processor namely the Intel Celeron J3455. On paper this processor looks like it should perform similar to the Intel Pentium N4200 processor but with a tradeoff between being a cheaper processor to purchase but more expensive to run due to the increased power requirements. Geekbuying provided a Vorke V1 Plus for review so let’s start by taking a look at the physical characteristics. The device comes in a plain box and was supplied with the ‘right AC Adapter’ for my country. The first observation is that it is quite a large device. At just over 6” square (153mm) and nearly 1.5” tall (38mm) it is the biggest mini PC I’ve […]

February 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

MX Pro 4K is an Android 7.0 TV Box powered by Allwinner H5 Processor

We’ve already seen Allwinner H5 processor in several development boards such as NanoPi NEO2, Orange Pi Zero Plus, or Libre Computer Tritium 2G among other. But while the processor has been designed for 4K OTT TV boxes, I had not seen any TV box based on the processor so far. MX Pro 4K, not to be confused by MXQ Pro 4K, changes that, as it features the quad core Cortex A53 processor combined with 1GB RAM, 8GB storage, and the usual HDMI, Ethernet, USB ports you’d expect from a TV box. MX Pro 4K specifications: SoC – Allwinner H5 quad core Cortex A53 processor with hexa-core Mali-450MP4 GPU System Memory – 1 GB DDR3 Storage – 8 GB eMMC flash (options: 4GB, 16GB, 32GB), micro SD card slot Video Output – HDMI 1.4b up to 4K @ 30 Hz, AV port (composite) Audio Output – HDMI, AV (stereo audio), and […]

February 5, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ubuntu 18.04 LTS Minimal Image Gets Even Smaller (30MB Compressed)

Sometimes you want to get the smallest image you can get, either because your storage device has limited capacity, you may want a faster boot, oe because you can. In the past, I’ve covered minimal firmware images for Raspberry Pi using Raspbian or the Yocto Project, as well as SliTaz or more recently a minimal Ubuntu 16.04 for ODROID C2/C1+ boards. Minimal images are also popular for containers like docker or LXD. Canonical has released Ubuntu minimal images for several years, and Dustin Kirklan blogged about Ubuntu 18.04 LTS mini images a few days ago, showing the good progress made over Ubuntu 14.04 and 18.04 “Bionic Beaver”, and asking for feedback. The charts above shows the minimal image went from around 62.78 MB (compressed) and 179.67 MB (uncompressed) for Ubuntu 14.04 LTS down to 29.65 MB (compressed) and 77.5 MB (uncompressed). That’s the number of AMD64 images, but ARM64 Ubuntu […]

February 5, 2018February 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Getting Started with IkaScope WiFi Pen-Oscilloscope, and ScanaQuad SQ50 USB Logic Analyzer & Signal Generator

A couple of weeks ago, I received IkaScope WS200 pen-like WiFi oscilloscope, as well as ScanaQuad SQ50 USB logic analyzer & signal generator, and I’ve already checked out the hardware both both in a aforelinked unboxing post. I had also very shortly tried IkaScope with GOLE 10 mini PC, but just to showcase potential use case for a Windows 10 mini PC with an inclined touchscreen display. But at the time I did not really a proper measurement, as it was more to test the mini PC than the oscilloscope itself. I’ve now had time to test IkaScope desktop program and mobile app in respectively Ubuntu 16.04 and Android 8.0.0, as well as ScanaStudio for ScanaQuad USB device using Ubuntu 16.04 only, since there’s no mobile version of the program. While I’ll focus on Ubuntu and Android, most of the instructions will be valid for Window 10 and Mac OS X […]