CNX Software - Embedded Systems News

March 16, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYiR Tech MYC-JA5D2X System-on-Module is Powered by Microchip ATSAMA5D2 Cortex A5 Processor

MYIR Tech has released MYC-JA5D2X system-on-module powered by a Microchip Atmel SAMA5D2 ARM Cortex A5 processor with 256MB flash, and 256 MB DDR3. The module relies on a SO-DIMM edge connector to expose the camera interface, Ethernet, USB, camera, and other I/O signals. MYC-JA5D2X CPU module specifications: SoC – Atmel SAMA5D26 or SAMA5D27 ARM Cortex A5 processor @ up to 500 MHz with 128KB L2 cache System Memory – 256MB DDR3 SDRAM Storage – 256MB NAND flash, 4MB data flash, 64KB EEPROM Connectivity – On-board 10/100M Ethernet PHY 200-pin SO-DIMM edge connector with: 1x Ethernet 1x USB Host, 1x USB Device, 1x USB HSIC (HSIC is only for SAMA5D27) Up to 10x serial ports, up to 2 x CAN (only for SAMA5D27) Up to 7 x I2C, up to 7 x SPI Up to 2 x QSPI 12 x 12-bit ADC (enhanced resolution up to 14 bits) 4x PWM 1x […]

March 15, 2017March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

$44 A5X Plus Mini TV Box Runs Android 7.1 on Rockchip RK3328 Processor

Rockchip introduced RK3328 processor for TV boxes at CES 2017. The processor is based on a quad core Cortex A53 processor and a Mali-450MP is some other competitors such as Amlogic S9xx series, but what made the processor stand out is that it already supports Android 7.1, and includes a USB 3.0 port. A5X Plus Mini is one of the first TV box based on the processor, and the first “Chinese” TV box I’ve seen running Android 7.x Nougat. A5X Plus mini specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP GPU System Memory – 1GB RAM Storage – 8 GB eMMC flash + micro SD card Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port with composite video and stereo audio Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, […]

March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments CC3200 WiFi SensorTag is Now Available for $40

Texas Instruments launched SensorTag in 2013, and at the time there was just a Bluetooth 4.0 LE version with 6 different sensors. I bought one for $25 at the time, and tried it with a Raspberry Pi board and a BLE USB dongle. Since then, the company has launched a new multi standard model (CC2650STK) supporting Buetooth low energy, 6LoWPAN, and ZigBee, and has just started to take orders for CC3200 WiFi SensorTag for $39.99, which seems expensive in a world of $2 ESP8266 modules. But let’s see what the kit has to offer: Wireless MCU – Texas Instruments CC3200 SimpleLink ARM Cortex-M4 MCU @ up to 80 MHz, with up to 256KB RAM, Hardware Crypto Engine, DMA engine Storage – 1 MB serial flash memory Connectivity – 802.11 b/g/n WiFi with on-board inverted-F antenna with RF connector for conducted testing Sensors – Gyroscope, accelerometer, compass, light sensor (OPT3001), humidity […]

March 15, 2017March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Socionext SC2A11 Low Power Server Processor Comes with 24 Cortex-A53 Cores, Scales up to 1536 Cores via PCIe

Socionext SC2A11 is an 24-core (tetracosa) ARM Cortex-A53 processor designed for low-power server system suitable for edge computing, web server & indexing, cloud computing, and any applications that do not require high single thread peak performance. The company also designed SC2A20 switch SoC that allows up to 64 SC2A11 processors (1536 cores) to communicate over PCI Express using Socionext DDT (Direct Data Transaction). SC2A11 SoC specifications: Processor – 24x ARM Cortex-A53 MPCore cores @ up to 1GHz, with 32KB/32KB I/D L1 cache, 256 KB L2 cache, and 4MB L3 cache Memory I/F – DDR4-2133Mbps 64-bit + ECC Flash I/F – HSSPI, eMMC PCIe – PCI Express Gen2, Root/Endpoint select, 4 lanes (2 systems/ for SoC IF) LAN – 2x 1Gbps with IPSec Network Offload Engine (wire-speed) Serial I/F – UART, I2C, GPIO The company did not provide any info about software, but it’s safe to assume it’s running Linux. There’s […]

March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

NXP Introduces Kinetis K27/K28 MCU, QorIQ Layerscape LS1028A Industrial SoC, and i.MX 8X Cortex A35 SoC Family

NXP pushed out several press releases with the start of Embedded World 2017 in Germany, including three new micro-controllers/processors addressing different market segments: Kinetis K27/K28 MCU Cortex M4 MCU family, QorIQ Layerscape LS1028A industrial applications processor, and i.MX 8X SoC family for display and audio applications, 3D graphic display clusters, telematics and V2X (Vehicle to everything). NXP Kinetis K27/K28 MCU NXP Kinetis K27/K28 MCU family is based on an ARM Cortex-M4 core clocked at up to 150 MHz with FPU,and includes up to 1MB embedded SRAM, 2MB flash, and especially target portable display applications. Kinetis K27/K28 MCUs share the following main features: 2x I2S interfaces, 2x USB Controllers (High-Speed with integrated High-Speed PHY and Full-Speed) and mainstream analog peripherals 32-bit SDRAM memory controller and QuadSPI interface supporting eXecution-In-Place (XiP) True Random Number Generator, Cyclic Redundancy Check, Memory Mapped Cryptographic Acceleration Unit K28 supports 3 input supply voltage rails (1.2V, 1.8V […]

March 15, 2017March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

ECDREAM EC-V26 is a Mini PC with a 8″ Touchscreen Display Powered by an Intel Celeron/Pentium Apollo Lake Processor

Mini PCs with a touchscreen display targeting consumer markets, and looking like very thick tablets started with PiPo X8, and later other companies joined the fray with products like GOLE 1, but the form factor appears to have become popular with even more manufacturers, as Shenzhen EC Technology has now launched ECDREAM EC-V26 powered by Intel Celeron or Pentium “Apollo Lake” processor, and equipped with an 8″ touchscreen display. ECDREAM EC-V26 mini PC specifications: SoC (one of the other) Intel Celeron N3350 dual core processor @ 1.1 GHz / 2.4 GHz with a 12 EU Intel® HD Graphics 500; 6W TDP Intel Celeron N3450 quad core processor @ 1.1 GHz / 2.2 GHz with a 12 EU Intel® HD Graphics 500; 6W TDP Intel Pentium N4200 quad core processor @ 1.1 GHz / 2.5 GHz with an 18 EU Intel HD Graphics 505; 6W TDP System Memory – 2GB on-board […]

March 14, 2017March 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 49 Comments

NanoPi NEO2 Development Board Powered by Allwinner H5 64-bit ARM Processor Sells for $15

NanoPi NEO is a cool little board, and I’ve been using it with Armbian as a 24/7 MQTT + Domoticz server for several weeks without any issues so far. FriendlyElec has now an update with NanoPi NEO2 featuring Allwinner H5 quad core Cortex A53 processor instead of Allwinner H3 Cortex A7 processor, a faster Gigabit Ethernet connection, and a new audio header. NanoPi NEO2 specifications: SoC – Allwinner H5 quad core Cortex A53 processor with an ARM Mali-450MP GPU System Memory – 512 MB DDR3 Storage – micro SD card slot Connectivity – Gigabit Ethernet (via RTL8211E-VB-CG chip) USB – 1x USB 2.0 host ports, 1x micro USB OTG port, 2x USB via headers Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin header with 2x USB, IR pin, I2S 5-pin audio header with microphone and LINE out signals Debugging – 4-pin header for serial […]

March 14, 2017March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Android 7.1 Nougat on Amlogic TV Boxes – A First Quick Look

Last year, we found out that Amlogic was working on Linux 4.4, possibly for their Android 7.0 Nougat SDK. As a developer who signed all relevant NDAs, Stane1983 has now been working on Amlogic Android 7.0 for a few day, and reported some of his findings. First Amlogic source code is based on Android 7.1.1 R6 (NMF26Q), but still with Linux 3.14.29, possibly because Mali-T830 GPU drivers are still r11p0, and Linux 4.4 may come later. One good thing is that the Nougat SDK supports 64-bit Android OS instead of the 32-bit Android we are all currently using in our TV boxes. A not-so-good news is that internal storage partitions have changed, which means most current TV boxes are unlikely to get an update, becau it may not be possible to perform OTA updated, and instead would require an updated via Amlogic USB burning tool. But let’s look at the […]