Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on JeVois-A33 is a Small Quad Core Linux Camera Designed for Computer Vision Applications (Crowdfunding)

JeVois-A33 is a Small Quad Core Linux Camera Designed for Computer Vision Applications (Crowdfunding)

JeVois Neuromorphic Embedded Vision Toolkit – developed at iLab at the University of Southern California – is an open source software framework to capture and process images through a machine vision algorithm, primarily designed to run on embedded camera hardware, but also supporting Linux board such as the Raspberry Pi. A compact Allwinner A33 has now been design to run the software and use on robotics and other projects requiring a lightweight and/or battery powered camera with computer vision capabilities. JeVois-A33 camera: SoC – Allwinner A33  quad core ARM Cortex A7 processor @ 1.35GHz with  VFPv4 and NEON, and a dual core Mali-400 GPU supporting OpenGL-ES 2.0. System Memory – 256MB DDR3 SDRAM Storage – micro SD slot for firmware and data 1.3MP camera capable of video capture at SXGA (1280 x 1024) up to 15 fps (frames/second) VGA (640 x 480) up to 30 fps CIF (352 x 288) […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on ADLE3800SEC is a Compact Intel Bay Trail-I Board with Dual Gigabit Ethernet, HDMI or DisplayPort, and More

ADLE3800SEC is a Compact Intel Bay Trail-I Board with Dual Gigabit Ethernet, HDMI or DisplayPort, and More

ADL Embedded Solutions, a US company specializing in… embedded solutions, has unveiled ADLE3800SEC embedded single board computer (SBC) optimized for size, weight and power (SWAP), based on an Intel Atom E3800 Bay Trail-I processor with HDMI, SATA dual Gigabit Ethernet, etc… The board is the first one part of the company’s Edge-Connect architecture defined a 75x75mm form factor with an edge connector exposing additional I/Os for breakout boards. ADLE3800SEC board specifications: SoC Intel Atom E3827 dual core Bay Trail-I processor @ up to 1.75GHz with 1MB cache, Intel Gen7 graphics (8W TDP) OR Intel Atom E3845 quad core Bay Trail-I processor@ up to 1.91GHz with 2MB cache, Intel Gen 7 Graphics (10W TDP) System Memory – Up to 4GB DDR3-1333MHz (soldered on-board) Storage – 1x M.2 socket(Key B, 2242); 1x SATA 2.0 (6GB/s) via edge connector Video Output 1x HDMI up to 1920 x 1200 or 1x DisplayPort up to […]

Khadas Edge2 Arm mini PC
Posted on by Jean-Luc Aufranc (CNXSoft) - 25 Comments on SmartHomy Hybrid TV Box with DTV Tuner Triples as a Game Console & Home Automation Gateway (Crowdfunding)

SmartHomy Hybrid TV Box with DTV Tuner Triples as a Game Console & Home Automation Gateway (Crowdfunding)

SmartHomy Homy Player is a TV box running Android TV that includes an ATSC, DVB-T2/C,DVB-S2, or ISDB-T tuner, is said to be powerful enough to be used as a 3D gaming platform, and serves as a security system and home automation gateway using Z-Wave, Bluetooth, WiFi and IR blaster to control your things. Homy player specifications [Updated on January 19th, 2017]: SoC – Amlogic S912 octa-core Cortex A53 processor with Mali T820MP3 GPU System Memory – 3 GB DDR3 Storage – 32 GB eMMC flash Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2, HDR, CEC Audio Output – HDMI and optical S/PDIF Video / Audio Capabilities – 10-bit 4K H.265 @ 60 fps, HD audio pass-through, Dolby Digital & DTS licenses DRM – Widevine Level 1, Microsoft PlayReader, Netflix license Digital TV Tuner – DVB-S2 (satellite), DVB-C/T/T2 (Cable/Terrestrial), ATSC, and ISDB-T Connectivity – Gigabit Ethernet, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 21 Comments on LicheePi One Allwinner A13 ARM Linux Board is Equipped with LCD Display and Camera Interfaces

LicheePi One Allwinner A13 ARM Linux Board is Equipped with LCD Display and Camera Interfaces

Allwinner A13 – repackaged as Allwinner R8 – single core Cortex A8 processor is used in $9 C.H.I.P board with 512MB, 4GB storage, WiFi and Bluetooth, and I/Os. Now a Chinese company has created a new Allwinner A13 board called Lichee Pi that appears especially suited to drive LCD displays thanks to its 40-pin LCD RGB connector, but it also comes with WiFi & Bluetooth, a micro SD slot, and some I/Os. Lichee Pi One board (preliminary/tentative) specifications: SoC – Allwinner A13 ARM Cortex A8 processor @ 1.0 GHz with Mali-400 GPU System Memory – 512MB DDR3 RAM Storage – 2x micro SD slot Display Interface – 40-pin RGB LCD connector, with 8080 interface, VGA and LVDS supported via add-on board Camera – 24-pin CSI interface Audio – 3.5mm audio jack Connectivity – Optional 802.11 b/g/n WiFi and Bluetooth via RTL8723BU module (Multiplexed with USB 2.0 host port) USB – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 28 Comments on Eweat R9 Plus TV Box Review Part 2 – Android, OpenWrt, and HDMI Recording

Eweat R9 Plus TV Box Review Part 2 – Android, OpenWrt, and HDMI Recording

Eweat R9 Plus is a device powered by Realtek RTD1295 SoC combining main functions: Android 6.0 TV box, OpenWrt NAS/router, and HDMI recorder thanks to its HDMI input port. It competes directly with Zidoo X9S which has the same features, except while Zidoo X9S has no internal SATA bay and your 2.5″ hard drive just hang outside the box, Eweat R9 Plus comes with an internal 3.5″ SATA bay that makes it much neater on your furniture… We’ve already seen that in the first part for review “Eweat R9 Plus unboxing and teardown“, and I was impressed by the hardware, but the software is even more important, and that’s what I’m going to check out in the second and final part of this review. First Boot, First Impressions and Setup. I’ve first inserted a 1TB 3.5″ SATA drive in the device, and then I connected an extra USB 3.0 hard […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 21 Comments on $25 NanoPi A64 is a Compact Yet Features Packed Allwinner A64 Development Board

$25 NanoPi A64 is a Compact Yet Features Packed Allwinner A64 Development Board

FriendlyARM has had a very busy year with their NanoPi boards, and they are completing the year by launching NanoPi A64 development board based on Allwinner A64 quad core Cortex A53 processor with 1GB RAM, Gigabit Ethernet, HDMI, USB ports and more. NanoPi A64 board specifications: SoC – Allwinner A64 quad-core Cortex-A53 @ 648MHz to 1.152GHz with an ARM Mali400 MP2 GPU System Memory – 1GB DDR3 RAM Storage – 1x micro SD slot Video Output / Display IF – HDMI 1.4 port,  30-pin MIPI DSI connector Audio – HDMI, 3.5mm audio jack Connectivity – 1x Gigabit Ethernet port (RTL8211E), 802.11 b/g/n WiFi USB – 2x USB 2.0 ports, 1x micro USB port for power only Camera – 24-pin DVP camera interface Debugging – 4-pin debug UART header Expansion 40-pin mostly Raspberry Pi compatible header with UART, SPI, I2C, PWM, GPIOs, etc… 7-pin I2S header Misc – IR Receiver, 1x […]

AAEON Intel Arc
Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Mediatek MT8173 Powered Emdoor 2-in-1 Laptops Run Android or Remix OS

Mediatek MT8173 Powered Emdoor 2-in-1 Laptops Run Android or Remix OS

Acer Chromebook R13 is the most powered ARM Chromebook so far thanks to its Mediatek MT8173 quad core processor combining two ARM Cortex A72 cores and Cortex A53 cores, as well as a PowerVR GX6250 GPU, 4GB RAM and a 13.3″ touchscreen display. But unless you live in the US or other markets where Chromebooks are sold, it’s pretty hard to buy, and that model is relatively expensive as it sells for close to $550 on Amazon. Emdoor, a Chinese design house, has made 2-in-1 hybrid laptops based on the processor with a 11.6″ or 13.3″ touchscreen display, 1 to 2GB RAM, and 16 to 64GB storage, which – once launched – should be easier to buy, and cost less. Both EM-T8513 and EM-T8516 models share most of the same specifications, except for the display: SoC – Mediatek MT8173 quad core processor with 2x Cortex A72 cores @ up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on SonikTech e-Paper Shield Starter Kit Relies on Teensy LC MCU Board

SonikTech e-Paper Shield Starter Kit Relies on Teensy LC MCU Board

Soniktek Electronics has designed the “e-Paper Shield Starter Kit” featuring Pervasive Displays’ E2215CS062 e-paper screen, and an adapter board to connect it to Teensy LC (Low Cost) board powered by NXP Kinetis L ARM Cortex M0+ microcontroller @ 48 MHz, or other 3.3V MCU boards supporting SPI. Adapter board & display specifications: Supports Pervasive Displays 2.15″ E2215CS062 e-paper screen with 208 x 112 resolution, no backlight required, fully sunlight-readable Communication protocol – SPI  @ 3.3V Sensor – On-board thermometer with I2C interface Dimensions – Screen: 48 mm x 26 mm; adapter board fits into Teensy-LC module (36x18mm) The advantages of e-Paper display are that they don’t require power to maintain an image, and they can be read in sunlight, just like actual paper. I can’t remember having seen many – if any – low cost e-Paper development kits so far, and the project is open source hardware with design files and […]

Khadas VIM4 SBC