SeaBerry mini-ITX motherboard Raspberry Pi CM4
Posted on

Seaberry Mini-ITX carrier board for Raspberry Pi CM4 exposes 11 PCIe slots and sockets

The Raspberry Pi CM4 may only have a one PCIe x1 Gen 2 interface, but this has not stopped ALFTEL from designing Seaberry, a mini-ITX carrier board for the Raspberry Pi Compute Module 4 with eleven slots and sockets making use of the single 5 Gbps PCIe Gen 2 interface. The board also offers two SATA ports, one Gigabit Ethernet port, one RJ45 console port, two HDMI ports, a micro SD card slot, two USB 2.0 ports, as well as the usual 40-pin GPIO expansion header, besides the PCIe x16 slot, a PCIe x1 side slot, and M.2 and mPCIe sockets. Seaberry carrier board specifications: Compatible systems-on-module Raspberry Pi CM4 module (Regular or Lite) Radxa CM3 Pine64 SoQuartz Storage – 1x MicroSD card for Raspberry Pi CM4 Lite, 1x M.2 socket for NVMe SSD (See PCIe expansion section) Video Output – 2x HDMI output ports, 1x MIPI DSI connector Camera […]

Sipeed LicheeRV
Posted on

Sipeed LicheeRV – A $16.90 Allwinner D1 Linux RISC-V board

Finally! There’s now a much more affordable Allwinner D1 RISC-V Linux board thanks to Sipeed LicheeRV Nezha CM SBC sold for $16.90 and up on Aliexpress, that’s much cheaper than the $100 asked for Nezha SBC, although still not incredibly cheap as we’ll see from the specifications below. Sipeed LicheeRV is actually both a board and a system-on-on-module with an edge connector, and is equipped with 512MB DDR3, a USB-C OTG port, a MicroSD card socket, and an SPI display interface. The dual M.2 edge connector can be plugged into a carrier board, and they will be a “86 Box” (86x86mm) for HMI display that can be used for home automation. Sipeed Lichee RV specifications: SoC – Allwinner D1 single-core XuanTie C906 64-bit RISC-V processor @ 1.0 GHz with HiFi4 DSP, G2D 2D graphics accelerators Memory – 512MB DDR3 memory @ 792 MHz Storage – MicroSD card slot Video – […]

Graperain Samsung, Rockchip RK3588, and Qualcomm CPU modules, SBCs, and carrier boards
Axiomtek GMB140 Ryzen R1000/V1000 mini-ITX board
Posted on

AMD Ryzen V1000/R1000 Mini-ITX board is made for game arcades, slot machines

Axiomtek GMB140 is a compact Mini-ITX motherboard powered by AMD Ryzen Embedded V1000/R1000 processor and mostly designed for gaming applications, as well as medical imaging, interactive kiosks, control rooms, and video surveillance. But when we’re not talking about your kids playing games at home here, but instead slot machines, arcade systems, and electronic gaming machines (EGM) powered by the GMB140 board with a PCIe interface for gaming I/O modules, and optional support for a 9-bit serial port for the SAS 6.02 protocol. Axiomtek GMB140 mini-ITX board specifications: SoC – AMD Ryzen Embedded V1000/R1000 quad-/dual-core “Zen” processor with Radeon Vega graphics either: AMD Ryzen Embedded V1807 w/ VEGA 11 graphics AMD Ryzen Embedded V1756 w/ VEGA 8 graphics AMD Ryzen Embedded V1605 w/ VEGA 8 graphics AMD Ryzen Embedded V1202 w/ VEGA 3 graphics AMD Ryzen Embedded R1606 w/ VEGA 3 graphics AMD Ryzen Embedded R1505 w/ VEGA 3 graphics System […]

Pentium G7400 & Celeron G6900
Posted on

Entry-level Alder Lake Pentium G7400 and Celeron G6900 processors show up online

Intel recently formally announced the 12th generation Alder Lake hybrid processors family with some high-end processors like the 125W Core i9-12900K processor designed for gaming.  But we know some low-power parts are also expected, and  @momomo_us recently shared a screenshot showing listings for the boxed version of Intel Pentium Gold G7400 and Celeron G6900 processor. The screenshot contains limited information revealing the $123 Pentium Gold G7400 comes with a 6 MB cache and clocks at up to 3.70 GHz, while the $91 Celeron G6900 features 4M of cache and a 3.40 GHz maximum CPU clock speed. Both are available in an (FC-)LGA16A package. What we do not know for sure from the screenshot is whether the two processors are indeed part of the Alder Lake family. and media reports like the NotebookCheck.net article that tipped us of the leak suspect they could either be an Alder Lake SoC, or Comet […]

Phytium D2000 Armv8 mini PC
Posted on

Phytium D2000 ARMv8 Mini PC runs Linux, supports gaming with Box64 emulator

Dragonbox is now taking pre-orders for a “Phytium D2000 ARMv8 Mini PC” with an octa-core 64-bit Arm processor, 16GB RAM, a 512GB NVMe, and an AMD Radeon RX550 GPU that makes it powerful enough to play older PC gaming like Crysis through Box64 x86_64 emulator, the 64-bit version of Box86 x86 emulator compatible with Raspberry Pi and other 32-bit Arm platforms. If the Dragonbox name sounds familiar, it’s because that’s the community that developed the Pyra handheld Linux game console/PC, except now they are offering a mini PC based on Phytium D2000 processor based on the same FTC663 Armv8 cores as found in the earlier Phytium FT2000/4 processor, with both Pythium SoC specifically designed for desktop PCs, contrary to most other Arm SoCs on the market. Phytium D2000 mini PC specifications: SoC –  Phytium D2000 ARMv8 octa-core custom Armv8 (FTC663) desktop processor @ 2.3 – 2.6 GHz with 8MB L2 […]

Sonoff T2 wiring Thailand
Posted on

Setting up a motion activated light with Sonoff Zigbee sensor and T2 WiFi switch

Earlier this month, I received a Sonoff ZBBridge Zigbee gateway, a motion sensor, and a Sonoff T2 wireless switch in order to set up everything to work as a motion activated light using Zigbee and WiFi through the eWelink Android app and cloud service. You can check out the first post to have a closer look at the hardware and accessories. We’ve now had time to configure everything and will report the results of the project in this post. The idea is basically to detect motion with the Zigbee sensor, which then transmits the info through the gateway, and the T2 switch is controlled by the eWelink cloud. Last time around, I thought I had a switch with a neutral wire at home, but I did not check in detail enough, and I’ve been unable to use it. Without suitable switches in my home, it was not practical to rewire […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
COM Express Type 6 module ECC RAM
Posted on

COM Express Type 6 module supports up to 64GB ECC RAM, 2.5GbE, 4 displays, and more

Here’s another Tiger Lake UP3 COM Express module courtesy of AAEON with the COM-TGUC6 COM Express Compact Type 6 modules equipped with a choice of Celeron. Core i3/i5/i7 embedded processors from the 11th generation Tiger Lake family. The module supports up to 64 GB ECC RAM via two SO-DIMM sockets, 2.5 Gpbs Ethernet, up to four independent displays via LVDS, VGA, and 4K DDI interfaces, SATA storage, PCIe Gen 3 & Gen4, and more for industrial. medical, and military applications. COM-TGUC6 specifications: Tiger Lake UP3 SoC (one or the other) Intel Core i7-1185G7E/GRE quad-core/octa-thread processor @ 1.8/4.4 GHz with 12 MB cache, 96 EU Intel Iris Xe graphics; TDP: 15W (Up to 28W) Intel Core i7-1145G7E/GRE quad-core/octa-thread processor @ 1.5/4.1 GHz with 8 MB cache, 80 EU Intel Iris Xe graphics; TDP: 15W (Up to 28W) Intel Core i3-1115G4E/GRE dual-core/quad-thread processor @ 2.2/3.9 GHz with 6 MB cache, 48 EU […]

Posted on

Meet Dot – A stamp sized 2-wheel robot powered by a Raspberry Pi RP2040 board

Kaisar (aka Roboticbits) has developed a tiny robot based on Pironomi Tiny 2040 Raspberry Pi RP2040 development board, which he/she claims is the smallest in the world, but it might not be depending on how one measures it. Nevertheless, the Dot is a cool project with two wheels with a 3V DC motor attached to the 22.9 x 18.2 mm board, and a 70mA battery to power the mini robot. Here’s what it looks like in action. Introducing Dot.. a stamp size @Raspberry_Pi #RP2040 robot.. the smallest in the world! Makes a proper use of the @pimoroni #Tiny2040!#raspberrypi #robot #robotics #make pic.twitter.com/rnYghWY6NJ — RoboticBits (@roboticbits) November 11, 2021 Eventually, the robot should be documented on Github, but at this time we have limited information with a photo accompanying the video demo above. Tom’s Hardware got more details about the software as well, with Kaisar saying the firmware was developed with […]

Boardcon LGA3576 Rockchip RK3576 System-on-Module designed for AI and IoT applications