Kendryte K510 Block Diagram

Kendryte K510 tri-core RISC-V AI processor deliver up to 3 TOPS

Kendryte K510 is a 64-bit tri-core RISC-V processor clocked at up to 800 MHz with AI accelerators that succeed the 400 MHz Kendryte K210 dual-core RISC-V AI processor released a few years ago first in Kendryte KD233 board, and then boards like Maxduino or Grove AI HAT conveniently programmable with Arduino or Micropython. Canaan formally announced the processor yesterday at the 2021 World Artificial Intelligence Conference claiming K510 had three times the performance of K210 making it suitable for UAV high-definition aerial photography, high-definition panoramic video conferences, robotics, STEAM education, driver assistance scenarios, and industrial and professional cameras. The press release did not have much information, but multiple sources provided additional details to CNX Software, so we have Kendryte K510 specifications: Processor – 2x 64-bit RISC-V processor @ 800 MHz, and 1x 64-bit RISC-V core @ 800 MHz with DSP extension AI subsystem with 3 TOPS in total KPU: General […]

Chuwi Hi10 Go

Chuwi Hi10 Go Jasper Lake Tablet launched for $288 and up

Chuwi Hi10 Go is a Windows 10 tablet powered by a Jasper Lake processor, namely a Celeron N4500, and equipped with a 10.1-inch Full HD display, 6GB RAM, and 128GB of storage that is currently sold on Aliexpress for $288 and up with shipping expected to start in August 2021. Last April, we wrote about a Jasper Lake Mini PC by Newsmay Technology, and at the time, we were told mass production would go ahead on May 10th, but there have been delays, and Chuwi Hi10 Go appears to be one of the very first Jasper Lake devices to be available to consumers. Chuwi Hi10 Go tablet specifications: SoC- Intel Celeron N4500 dual-core processor @ 1.1GHz-2.8GHz with Intel UHD Graphics @ 350-750MHz; 6W TDP System Memory – 6GB LPDDR4X Storage – 128GB eMMC flash, MicroSD card socket Display – 10.1-inch touchscreen IPS display with 1920×1200 resolution, 16:10 aspect ratio Video […]

Graperain Samsung, Rockchip RK3588, and Qualcomm CPU modules, SBCs, and carrier boards
Keyboardio Model 100

Keyboardio Model 100 wooden keyboard runs open-source Arduino firmware (Crowdfunding)

Are you bored with keyboard news yet? Keyboardio Model 100 does not quite look like most keyboards though. It’s basically a piece of art with an enclosure made of walnut or maple hardwood, and designed as an ergonomic keyboard with left and right parts with a total of 64 mechanical switches with RGB LEDs and custom-sculpted keycaps. Keyboardio Model 100 also runs Kaleidoscope open-source firmware programmed in the Arduino IDE, and can be customized by the user with Chrysalis open-source, cross-platform graphical configuration tool. The community is also working on porting QMK firmware to the keyboard. The Keyboardio Model 100 ships with QWERTY keycaps, but alternative keycap sets with Dvorak, Colemak, Linear A, or blank legends are available as a add-on. Other accessories include a 1.5 USB-A to USB C cable for connection to the host, a 10cm  RJ45 interconnect cable and a 1m RJ45 interconnect cable to connect the […]

PiRelay 8-Channel Raspberry Pi touchscreen display

Relay expansion board for Raspberry Pi includes 4.3-inch touchscreen display (Crowdfunding)

There are plenty of multi-relay boards for Raspberry Pi, but since those are often combined with an HMI for control, SB Components decided to offer an all-in-one solution with an expansion board equipped with eight relays and a 4.3-inch touchscreen display connected to a Raspberry Pi via HDMI and USB. PiRelay 8 specifications: Relays 8x relays with 3.3V/5V trigger signal Input – 250V AC/7A, 30V DC/10A Screw terminal blocks NO (Normally Open) and NC (Normally Closed) modes available Isolation – EL357NC optocouplers with current transfer ratio (CTR) of 50-600% at IF=5mA, VCE=5V Display support – Optional 4.3-inch touchscreen display with 800 x 480 pixels resolution, HDMI input for video, USB for touchscreen support. It also comes with a 3.5mm audio jack, an HDMI audio output, a speaker connector, and mounting holes for the Raspberry Pi. 40-pin GPIO header to connect a Raspberry Pi SBC (Pi 4, Pi 3B+, Pi 3, […]

MicroMod Teensy

MicroMod Teensy brings Teensy 4.0 board to M.2 form factor

Teensy 4.0, a low-cost board based on NXP i.MX RT1062 Arm Cortex-M7 crossover processor, is now getting a little brother with MicroMod Teensy following the same M.2 form factor as other Sparkfun MicroMod boards. Born from a collaboration between PJRC and Sparkfun, MicroMod Teensy has essentially the specs of Teensy 4.0 but with larger flash memory, and the board will be fully supported by the Teensyduino add-on to the Arduino IDE as noted by Paul Stoffregen on Twitter. MicroMod Teensy specifications: SoC – NXP i.MX RT1062 Arm Cortex-M7 processor at 600 MHz with  1024KB RAM (512KB is tightly coupled), Storage – 16MB serial flash (instead of 2MB on Teensy 4.0) M.2 MicroMod connector with USB Device up to 480Mbit/sec: Capable of enumerating as a USB keyboard, mouse, joystick, MIDI, audio, and more USB Host up to 480Mbit/sec: Capable of interfacing to USB flash drives, mice, keyboards, and more 7x Serial […]

Multifunction-keyboard touchscreen display

FICIHIP multifunctional keyboard includes 12.6-inch touchscreen display (Crowdfunding)

Keyboards have made the news in recent months with stories ranging from a customizable programmable keyboard, to a keyboard part of a USB-C dock, and a 2-key open-source keypad. FICIHIP multifunctional keyboard is special in its own way as besides a traditional QWERTY keyboard is also includes a 12.6-inch touchscreen display which makes it looks like a computer, but no, it’s really just a USB keyboard that happens to come with a display design for computers and smartphones. FICIHIP multifunctional keyboard key features and specifications: QWERTY keyboard with RGB backlight and hot-swappable mechanical keycaps for DIY layout on K2 model only Display – 12.6-inch screen with 1920×515 resolution @ 60 Hz, 10-point multitouch panel HDMI input – HDMI 1.4 port USB – USB 3.1 Type-C port, 2x USB 2.0 ports Aluminum body That means the keyboard acts as a second display either through the USB-C port when connected to a […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
5G, triple Ethernet for UP Board

UP Connect Plus adds 5G support, 3 GbE ports to UP Core Plus, UP Xtreme SBCs

AAEON UP Connect Plus is a carrier board with three Gigabit Ethernet (GbE) ports, and an M.2 slot plus a micro SIM card socket adding support for 5G cellular connectivity to the company’s Appolo Lake-based UP Core Plus and Whiskey Lake-powered UP Xtreme single board computers. UP Connect Plus specifications: Connectivity 3 Gigabit Ethernet RJ45 ports in two configurations: 3x Intel Ethernet Controller I211-AT 3x Intel Ethernet Controller I210-IT with wide temperature and TSN (Time-sensitive Networking) 5G cellular – M.2 3042/3052 colay socket with micro-SIM card port to support 4G/5G modules USB – 1x USB 3.0 Type-A port for UP Core Plus only PCIe – 1x 2 channel PCIe switch SBC connectors – 2x 100-pin high-speed docking connectors Power Supply – 12V/5V from the main board Power Consumption – Approximately 36 to 40 Watts with UP Core Plus + UP Connect Plus Dimensions – 90 mm x 56 mm Temperature […]

JeVois Pro

Jevois Pro small AI camera with Amlogic A311D SoC offers up to 13 TOPS (Crowdfunding)

Jevois-A33 smart camera was a tiny Linux camera with Allwinner A33 processor designed for computer vision applications and announced in 2016. I had the opportunity to review the computer vision camera the following year, and it was fun to use to learn about computer vision with many examples, but since it relied on the CPU for processing, it would not have been suitable for all projects due to the lag, as for example, object detection took 500ms and Yolo V3 around 3 seconds per inference. But time has passed, and great progress has been made in the computer vision and AI fields with the tasks now usually handled by a built-in NPU, or an AI accelerator card. So JeVois Pro deep learning camera has just been launched with an Amlogic A311D processor featuring a 5 TOPS NPU, and support for up to 13 TOPS via a Myriad X or Google […]

Boardcon LGA3576 Rockchip RK3576 System-on-Module designed for AI and IoT applications