industrial

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Toshiba “MH3 Group (2)” Arm Cortex-M3 MCU supports firmware updates without interrupting operation

Toshiba “MH3 Group (2)” Arm Cortex-M3 MCU supports firmware updates without interrupting operation

Toshiba MH3 Group 2 microcontroller

Toshiba “MH3 Group (2)” Arm Cortex-M3 microcontrollers come with a 1MB flash memory partitioned into two 512KB partitions to enable firmware updates without interrupting microcontroller operation using an area swap function to rotate to the new firmware seamlessly. The new M3H Group (2) builds upon the M3H Group(1) by expanding the code flash memory up to 1MB, and the RAM capacity from 66KB to 130KB. Both are part of the “TXZ+ Family Advanced Class” manufactured with a 40nm process, and equipped with a 120 MHz Arm Cortex-M3 core as well as various interface and motor control options such as UART, I2C, Advanced Encoder Input Circuit, and Advanced Programmable Motor Control Circuit. Toshiba MH3 Group 2 key features and specifications: CPU core – Arm Cortex-M3  @ 120 MHz with memory protection unit (MPU) Internal oscillator – 10MHz (+/-1%) Internal memory Code flash memory – 512KB to 1024KB (program/erase cycles: up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Olimex ESP32-C6-EVB supports WiFi 6, BLE, Zigbee, comes with four relays, four opto-isolated inputs

Olimex ESP32-C6-EVB supports WiFi 6, BLE, Zigbee, comes with four relays, four opto-isolated inputs

Olimex ESP32-C6-EVB

Olimex ESP32-C6-EVB is an open-source hardware board based on an ESP32-C6 wireless module with 2.4 GHz WiFi 6, Bluetooth LE, and Zigbee connectivity, and offering four relays and four opto-isolated inputs, as well as further expansion via two UEXT connector. So far we had a limited amount of third-party ESP32-C6 boards, with Espressif making their own module and development board available in January, and 01Space launching a tiny ESP32-C6 board in April, a time when a lot of software work was still needed.  But the ESP-IDF v5.1 with ESP32-C6 support is nearing release (now RC2), and the Olimex board may mark the start of greater availability of ESP32-C6 hardware with stable/usable firmware. ESP32-C6-EVB specifications: Wireless module – ESP32-C6-WROOM-1-N4 module with Espressif Systems ESP32-C6 single core 32-bit RISC-V processor @ 160 MHz with 2.4 GHz WiFi 6 1T1R with Target Wake Time (TWT) support, Bluetooth LE 5.0, and 802.15.4 radio for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Linux 6.4 release – Main changes, Arm, RISC-V and MIPS architectures

Linux 6.4 release – Main changes, Arm, RISC-V and MIPS architectures

Linux 6.4 release

Linux 6.4 has just been released by Linus Torvalds on the Linux Kernel Mailing List (LKML): Hmm. Final week of 6.4 is done, and we’ve mainly got some netfilter fixes, some mm reverts, and a few tracing updates. There’s random small changes elsewhere: the usual architecture noise, a number of selftest updates, some filesystem fixes (btrfs, ksmb), etc. Most of the stuff in my mailbox the last week has been about upcoming things for 6.5, and I already have 15 pull requests pending. I appreciate all you proactive people. But that’s for tomorrow. Today we’re all busy build-testing the newest kernel release, and checking that it’s all good. Right? Released around two months ago, Linux 6.3 brought us AMD’s “automatic IBRS” Spectre defense mechanism, additional progress on the Rust front with User-mode Linux support (on x86-64 systems only), the NFS filesystem (both the client and server sides) gained support for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Portenta C33 is a $64 Arduino Pro board based on Renesas RA6M5 Arm Cortex-M33 MCU

Portenta C33 is a $64 Arduino Pro board based on Renesas RA6M5 Arm Cortex-M33 MCU

Arduino Portenta C33

Arduino Portenta C33 is the latest board from the Arduino Pro family which the company dubs a “high-performance, low-price” solution based on a 200 MHz Renesas RA6M5 Arm Cortex-M33 microcontroller and equipped with a ESP32-C3 Wi-Fi and Bluetooth Low Energy module. The new board provides a cost-effective alternative to the Portenta H7 and X8 boards, but still offers wireless connectivity, a secure element for industrial-grade security, and compatibility with Portenta, MKR, and Nicla components. Portenta C33 specifications: Microcontroller – Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller @ up to 200 MHz with 512KB SRAM, 2MB Flash, Arm TrustZone, and Secure Crypto Engine 9 Storage – 16 MB QSPI Flash Connectivity 10/100M Ethernet PHY ESP32-C3 WiFi and BLE module USB – 1x USB Type-C high-speed port with Power Delivery support I/Os via 2x 80-pin high-density connectors, Arduino MKR headers with castellated hole, and a 5-pin I2C connector Storage – SD Card Networking – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on WLKATA Robotics Haro380 is a high precision industrial 6-Axis mini robotic arm (Crowdfunding)

WLKATA Robotics Haro380 is a high precision industrial 6-Axis mini robotic arm (Crowdfunding)

HARO380 high precision robotic arm

WLKATA Robotics’ Haro380 is a high-precision industrial 6-axis mini robotic arm that can carry a payload of up to 500 grams and designed for education, engineering projects, and light manufacturing. We’ve covered some desktop robotic arms in the past such as the myCobot 280 Pi, but the HARO380 goes a step further with 0.05mm repeatability, a 6-axis harmonic reducer, and zero backlash. It is an upgraded version of the company’s entry-level Mirobot robotic arm introduced in 2019. Haro380 specifications and key features: Control board Unnamed MCU Base interface – RS485, DC power, expansion interface, USB interface I/Os – 2x digital inputs, 2x digital outputs Emergency switch Supply voltage – 24V DC Temperature Range – 5 to 40°C Humidity – 20 to 75% RH non-condensing 6-axis harmonic reducer Magnetic end effectors Repeatability – +/- 0.05 mm Max payload – 500 grams Reach – 380 mm Control interfaces – USB to serial, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Helix 511 fanless industrial embedded computer features Intel Celeron 7305 up to Core i7-12800HL CPU

Helix 511 fanless industrial embedded computer features Intel Celeron 7305 up to Core i7-12800HL CPU

Onlogic HX511

OnLogic Helix 511 edge computer features an Intel Alder Lake processor from Celeron 7305 up to a Core i7-12800HL CPU with up to 64GB DDR5, M.2 SATA or NVMe storage and designed for use in manufacturing, automation, energy management, and other edge and IoT applications. The fanless industrial embedded computer also comes with two 2.5GbE ports, support up to four independent displays via DisplayPort and Thunderbolt 4 connectors, is equipped with six USB 3.2 ports, as well as optional digital I/O or serial ports for expansion. Helix 511 specifications: Alder Lake SoC Intel Celeron 7305 penta-core processor @ 3.10GHz / 4.20GHz (Turbo) with 48EU Intel UHD graphics – PBP: 15W, up to 55W MTP Intel Core i3-12300HL octa-core/12-thread processor @ 2.00GHz  / 3.30GHz / 4.40GHz (Turbo) with Intel UHD graphics – PBP: 45W, up to 65W MTP Intel Core i5-12600HL 12-core/16-thread processor @ 2.70GHz / 3.30GHz / 4.50GHz (Turbo) with […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on NVIDIA Jetson AGX Orin Industrial offers ECC memory, extended temperature range, improved robustness

NVIDIA Jetson AGX Orin Industrial offers ECC memory, extended temperature range, improved robustness

NVIDIA Jetson AGX Orin Industrial

NVIDIA has recently introduced the Jetson AGX Orin Industrial module that comes with an extended temperature range, operating lifetime, shock and vibration specifications, as well as support for error correction code (ECC) memory, and delivers up to 248 TOPS of AI performance with power configurable between 15-75 W. The industrial-grade system-on-module is based on the Jetson AGX Orin 64GB module but with lower operating frequencies to enable a longer operating lifetime and improved endurance. It’s form-factor and pin-compatible with Jetson AGX Orin, and NVIDIA says it delivers more than eight times the AI performance of the 30 TOPS Jetson AGX Xavier Industrial introduced in 2021, but does not integrate Cortex-R5F cores. NVIDIA Jetson AGX Orin Industrial specifications: CPU – 12-core Arm Cortex-A78AE v8.2 64-bit processor @ 2.0 GHz with 2MB L2 + 4MB L3 cache GPU / AI accelerators NVIDIA Ampere architecture with 2,048 NVIDIA CUDA cores and 64 Tensor […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on CompuLab UCM-iMX93 – A miniature NXP i.MX 93 module with WiFi 5 & Bluetooth 5.3

CompuLab UCM-iMX93 – A miniature NXP i.MX 93 module with WiFi 5 & Bluetooth 5.3

Compulab UCM-iMX93 system-on-module

CompuLab UCM-iMX93 is a miniature system-on-module powered by the new NXP i.MX93 Cortex-A55 AI processor family with up to 2GB RAM and 64GB eMMC flash. The tiny 38x28mm features a Gigabit Ethernet PHY, a WiFi 5 and Bluetooth 5.3 wireless modules, and plenty of multimedia, communication, and peripheral interfaces through two 100-pin high-density connectors including display and camera interfaces, USB ports, CAN FD, and up to 79 GPIOs. UCM-iMX93 specifications: SoC – NXP i.MX9352 or i.MX9331 dual-core/single-core Arm Cortex-A55 @ 1.5 GHz (industrial) / 1.7 GHz (commercial) with Arm Cortex-M33 real-time core @ 250 MHz, Arm Ethos U65 microNPU System Memory – 512MB to 2GB LPDDR4 Storage – 8GB to 64GB eMMC flash Networking Gigabit Ethernet PHY Certified WiFi 5 (802.11ac) and Bluetooth 5.3 BLE module (NXP 88W8997) 2x 100-pin 0.4mm pitch high-density UCM connectors Display 4-lane MIPI-DSI up to 1920 x 1080 @ 60Hz 4-lane LVDS up to 1366 […]