Single Board Computer News - Page 3 of 86 - CNX Software

March 18, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Some Raspberry Pi 5 boards can be overclocked up to 3.14 GHz (and run just fine)

The Raspberry Pi 5 is advertised as a single board computer with a CPU clocked up to 2.4 GHz, but some of the boards can run stably at a higher frequency, and Jeff Geerling found out one of his boards could be overclocked up to 3.14 GHz with no issues when running a stress test. The Raspberry Pi 5 already delivers a two to three-times jump in performance against the previous generation Raspberry Pi 4 SBC when clocked at 2.4 GHz, but some already overclocked their up to 3.0 GHz, and many thought it was the maximum limit. But a recent firmware release proved them wrong, as it turns out some Raspberry Pi 5 boards can boot at 3.2 GHz and run stably at 3.14 GHz with an adequate cooling solution. The voltage was also adjusted in the config.txt to more or less safe settings. Contrary to the photo above, […]

March 18, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Sipeed MaixBox M4N AI Box with 43.2 TOPS AXera AX650N SoC can decode/encode up to 32 videos

Sipeed MaixBox M4N is an AI box for video analytics and computer vision equipped with an AXera-Pi Pro (AX650N) octa-core Cortex-A55 SoC with a 43.2 TOPS (INT4) or 10.8 TOPS (INT8) AI accelerator and an H.265/H2.64 video encoder/decoder supporting up to 32 1080p30 videos. The AI box is based on the Sipeed Maix-IV motherboard, an upgrade to the Maix-III devkit with an AX620A quad-core Cortex-A7 SoC with a 14.4 TOPS AI accelerator (INT4). It comes with 8GB RAM shared for Linux and the AI accelerator, 32GB eMMC flash and an M.2 SATA socket for storage, two HDMI outputs, two gigabit Ethernet ports, optional WiFi or 4G LTE mini PCIe module, a few USB ports, and RS232 and RS485 interfaces. Sipeed MaixBox M4N specifications: SoC – AXera AX650N CPU – Octa-core Arm Cortex-A55 @ 1.7 GHz with NEON support NPU – 43.2 TOPS @ INT4, 10.8 TOPS @ INT8 with support […]

March 11, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linux 6.8 release – Notable changes, Arm, RISC-V, and MIPS architectures

Linus Torvalds has just announced the release of Linux 6.8 on the Linux kernel mailing list: So it took a bit longer for the commit counts to come down this release than I tend to prefer, but a lot of that seemed to be about various selftest updates (networking in particular) rather than any actual real sign of problems. And the last two weeks have been pretty quiet, so I feel there’s no real reason to delay 6.8. We always have some straggling work, and we’ll end up having some of it pushed to stable rather than hold up the new code. Nothing worrisome enough to keep the regular release schedule from happening. As usual, the shortlog below is just for the last week since rc7, the overall changes in 6.8 are obviously much much bigger. This is not the historically big release that 6.7 was – we seem to […]

March 5, 2024March 4, 2024 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Kaki Pi is a Raspberry Pi-inspired Renesas RZ/V2H AI SBC with four camera connectors, a PCIe 3.0 interface

Kaki Pi Renesas RZ/V2H SBC Raspberry Pi flavor

Japanese company Yuridenki-Shokai Co. Ltd will soon launch the Kaki Pi single board computer based on the just-announced Renesas RZ/V2H Arm microprocessor with a powerful 80 TOPS AI accelerator, with Raspberry Pi-inspired form factor and features such as the 40-pin GPIO header, the same PCIe 3.0 connector as found in the Raspberry Pi 5, and four 22-pin MIPI CSI connectors that look to be compatible with the Raspberry Pi cameras. The board also comes with up to 8GB LPDDR4, a microSD card for the OS, a 22-pin MIPI DSI connector for a display, a gigabit Ethernet port, two USB 3.0 ports, two CAN Bus connectors, and other interfaces that make it suitable for robotics applications such as Autonomous Mobile Robots (AMR) and HSR (Human Support Robots) as well as IoT projects. Kaki Pi specifications: SoC – Renesas RZ/V2H CPU/MCU cores Quad-core Arm Cortex-A55 processor up to 1.8 GHz Dual-core Arm […]

February 26, 2024February 25, 2024 by Debashis Das - No Comments

BrainChip’s Neuromorphic Akida Edge AI Box is now available for pre-orders at $799

BrainChip Neuromorphic Akida Edge AI Box

BrainChip has recently opened preorders for their Akida Edge AI Box, built in partnership with VVDN Technologies. This box features an NXP i.MX 8M Plus SoC and two Akida AKD1000 neuromorphic processors for low-latency, high-throughput AI processing at the edge. The system features USB 3.0 and micro-USB ports, HDMI, 4GB LPDDR4 memory, 32GB eMMC with up to 1TB micro-SDXC expansion, dual-band Wi-Fi, and two gigabit Ethernet ports for external camera connections, all within a compact, passively-cooled chassis, powered by 12V DC. BrainChip Akida Edge AI Box Specifications: Host CPU – NXP i.MX 8M Plus Quad SOC with 64-bit Arm Cortex-A53 processor running at up to 1.8GHz AI/ML Accelerator – Dual Brainchip AKD1000 (Akida Chip) over PCIe for efficient AI processing Memory – 4GB LPDDR4 Storage 32GB eMMC flash MicroSD card slot for additional storage options Display Output – HDMI output supporting up to 3840 x 2160p30 resolutions with a pixel clock […]

February 21, 2024February 21, 2024 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Banana Pi BPI-M6 SBC features SenaryTech SN3680 quad-core Cortex-A73 AI processor

Banana Pi BPI-M6 is a credit-card single board computer based on SenaryTech SN3680 SoC comprised of a quad-core Arm Cortex-A73 processor, an Arm Cortex-M3 real-time core, an Imagination GE9920 GPU, and an NPU delivering up to 6.75 TOPS. The board ships with 4GB LPDDR4 RAM and 16GB eMMC flash. Its layout is fairly similar to the one of the Raspberry Pi 4 with four USB ports, Gigabit Ethernet, a 40-pin GPIO header, a USB Type-C port for power, and two micro HDMI ports. However, only one of those is for HDMI output, as the second is for HDMI input, and there’s also an M.2 Key-E socket for expansion. Banana Pi BPI-M6 specifications: SoC – SenaryTech SN3680 (also known as Synaptics VS680) with CPU – Quad-core Arm Cortex-A73 processor up to 2.1GHz MCU – Arm Cortex-M3 real-time security core @ 250MHz GPU – Imagination PowerVR Series9XE GE9920 GPU VPU – 4Kp60 […]

February 20, 2024February 20, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Rockchip RK3568-powered ASUS Tinker Board 3N is now available in three variants

The ASUS Tinker board 3 was first unveiled in April 2023 before being renamed as Tinker Board 3N later that year, and the three variants of the Rockchip RK3568 single board computer (SBC) are now available. The standard configuration is the Tinker Board 3N in the commercial temperature range, while the Tinker Board 3N Plus has the same features, except it can operate in the industrial temperature range (-40°C to 85°C). The Tinker Board 3N Lite is a cost-down version in the same form factor, but with a single gigabit Ethernet port without PoE support, no M.2 B-key socket for an NVMe SSD or 4G/5G cellular connectivity, no 16MB SPI flash, fewer serial interfaces, and no CAN Bus. You’ll find a comparison of the specifications for the three variants in the table below. Note the prices above are from Amazon with a 10% discount when applicable. ASUS provides support for […]

February 15, 2024February 15, 2024 by Debashis Das - 2 Comments

EmbedFire LubanCat 4 card computer – A Rockchip RK3588S dev board with a mini PCIe socket for WiFi or 4G LTE

youyeetoo Lubancat 4 RK3588S Based Raspberry Pi Size SBC

Launched by Yehuo Electronic EmbedFire LubanCat 4 card computer or LubanCat 4 in short, is a Rockchip RK3588S SBC that packs quite a lot of features in an 85x56mm form factor with Ethernet, USB, mini PCIe, HDMI 2.1, SIM & microSD card holder, and more. The board comes with up to 16GB of RAM and 128GB of eMMC flash. It comes with a Gigabit Ethernet port, five USB ports (including one USB-C), a built-in microphone, multiple audio inputs and outputs, a 40-pin Raspberry Pi compatible expansion header, and supports HDMI input through an adapter connected to a MIPI CSI port. EmbedFire LubanCat 4 card computer specifications: SoC – Rockchip RK3588S CPU – Octa-core processor with 4x Cortex-A76 cores @ up to 2.2-2.4 GHz, 4x Cortex-A55 cores @ up to 1.8 GHz GPU – Arm Mali-G610 GPU with OpenGL ES 3.2, OpenCL 2.2, and Vulkan 1.2 support VPU – 8Kp60 video decoder […]