Android

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on Tronsmart Draco AW80 SATA Performance in Android

Tronsmart Draco AW80 SATA Performance in Android

When Allwinner A80 TV boxes with SATA port were first release, some people hailed SATA performance, especially while seeking during video playback. But at the time, I was skeptical of these claims since Allwinner A80 SoC does not have have a SATA interface, so a USB to SATA bridge must be used, and the performance should be the same as USB hard drives. Unfortunately, I was unable to confirm these doubts, and test SATA performance in my review of Tronsmart Draco AW80 Meta, because at the time, I did not have any spare SATA hard drive or SSD. But since I’ve received CubieTruck Metal Case kit, which include a 120 GB SSD, so I could finally test the device SATA interface. This CHUANG JIU SSD achieves write and read speeds of respectively 8.7 MB/s & 50.5 MB/s for NTFS, and 36.31 MB/s & 179.45 MB/s for EXT-4 using CubieTruck with […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Android 5.0 Lollipop Running on Amlogic AML8726-MX Based WeTek Play STB

Android 5.0 Lollipop Running on Amlogic AML8726-MX Based WeTek Play STB

Last month as Android Lollipop was shown booting on a Rockchip RK3188 tablet, and a few days later several companies such as Allwinner and Rockchip announced Android 5.0 ports were in progress for their latest processors, a few people asked me: what about Amlogic? I had no news at the time, but I expected the company to port Android 5.0 to their recent processor such as S802, S805, or S812, so I was surprised when I saw WeTek Play might be the first Amlogic device to boot Android 5.0 (CyanogenMod version), since it features the old dual core Amlogic AML8726-MX processor. The company has just released their latest Android 4.2 firmware, so this Android 5.0.1 version is most probably an early firmware, just not quite ready for prime time just yet, but hopefully they’ll release a stable version  within a few weeks. That’s the boot and About WeTek Play video […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Unboxing of BuyForSure 4KH 2160p/H.265 Android Media Player Powered by HiSilicon Hi3798M SoC

Unboxing of BuyForSure 4KH 2160p/H.265 Android Media Player Powered by HiSilicon Hi3798M SoC

BuyForSure (BFS) is a company that sells various item on Aliexpress and Ebay, and then might also be involved in some product development (TBC). A couple of weeks ago I wrote about an inexpensive HiSilicon Hi3798M based TV box (quad core Cortex A7) supporting 2160 (4K UHD) video output and decoding, HEVC/H.265 video decoding, and featuring a USB 3.0 port. The company asked me if I wanted to receive a sample, and I accepted because few companies promote HiSilicon and MStar based products for oversea markets. So they send me their BFS 4KH TV box, my first HiSilicon device, and early next year, I’m likely to receive Zidoo X9 based on Mstar MSO9180 from another company, so that’s another story… Today, I’ll start by taking pictures of the media player and its board, and in several days I’ll post a review showing what this $50+ box is capable of (or […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linaro 14.12 Release with Linux 3.18 and Android 5.0

Linaro 14.12 Release with Linux 3.18 and Android 5.0

Linaro usually releases images and source code on the last Thursday of the month, but since most people will have long holidays for Chritsmas and New Year, the last working Thrusday of this month was yesterday (18th). Linaro 14.12 release includes Linux kernel 3.18 (baseline), Linux 3.10.62 & 3.14.26 (LSK, same versions as last month), and Android 5.0.1 Lollipop. Here are the highlights of this release: Linux Linaro 3.18-2014.12 Based on v3.18 release GATOR topic: version 5.20 updated topic from Qualcomm LT (includes IFC6410 board support) updated integration-linaro-vexpress64 topic by ARM LT (FVP Base and Foundation models, and Juno support) updated LLVM topic (uses the community llvmlinux-latest branch) included ILP32 patch set v3  rebased on 3.18. Boot tested with aarch64 userland. Work is in progress to test with aarch64-ilp32 userland. config fragments updated – SELinux related config options enabled in linaro-base.conf, device tree runtime self tests enabled in distribution.conf Linaro […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on Jesurun Maxone Allwinner A80 mini PC with 4GB RAM Sells for $184 (Promo)

Jesurun Maxone Allwinner A80 mini PC with 4GB RAM Sells for $184 (Promo)

Yesterday, I discovered DealExtreme listed four versions of new Allwinner A80 mini PC called Jesurun Maxone, with a combination of 2GB RAM/16GB Flash, or 4GB RAM/32GB flash, and US or EU power adapters, for respectively $167.40 and $207. But after a closer look, I found out those boxes are probably based on the same hardware used for Tronsmart Draco AW80 Meta and Telos, minus the external Wi-Fi antenna, and the price was a little higher so I did not feature this device in a new article. But today, GearBest provided a coupon code (JM4GCN) allowing to get Maxone 4GB RAM for $183.99, or about $15 discount compared to Draco AW80 Telos. They’ve also provided JM2GCN coupon for the 2GB RAM version, but the price ($149.99) is almost exactly the same as Draw AW80 Meta. Remember that when shopping online from oversea websites, you may be hit by custom duties back […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 29 Comments on Unboxing of Amlogic S812 based Sunchip CX-S806 Android Media Player

Unboxing of Amlogic S812 based Sunchip CX-S806 Android Media Player

Sunchip CX-S806 is my third Android media player based on Amlogic S812 processor, after Eny Technology EM8S (which I haven’t received yet, because the firmware is not really ready yet), and MINIX NEO X8-H Plus with a stable firmware, but some disappointment with regards to peripherals performance (eMMC, Ethernet,…), and poor support for H.265 / 4K videos in XBMC/Kodi, at least for now, since I’m sure they’ll work out the video issue with subsequent firmware / Kodi releases. CX-S806 has lower specs compared to NEO X8-H Plus, and does not come with an air mouse, but it costs about half of the MINIX box, so we’ll have to see how it performs. For now, I simply post pictures of the device and the internal board, since I’ve already posted CX-S806 specifications previously. CX-S806 Unboxing Sunchip sent me the box via DHL, and I received it in the black and gold […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Giayee Atom PC is a Rockchip RK3288 Mini PC with a VGA Port, Multiple Placement Options (Crowdfunding)

Giayee Atom PC is a Rockchip RK3288 Mini PC with a VGA Port, Multiple Placement Options (Crowdfunding)

You may know that Rockchip and Intel have a partnership to design Atom Sofia processors, but Giayee Atom PC has nothing to do with this initiative at all, and it’s just a pretty standard Rocchip RK3288 based mini PC, except it includes a VGA port, and various “placement” options namely horizontal position, vertical position, and TV/monitor mount. Atom PC specifications: SoC – Rockchip RK3288 Quad Core Cortex A17 up to 1.8GHz with ARM Mali-T764 GPU supporting OpenGL ES1.1/2.0/3.0, Open VG1.1, OpenCL, DirectX11 System Memory – 2GB DDR3 Storage – 8 GB NAND flash (16 to 32 GB optional) Video Output- HDMI up to 1080p (no 4K?), and VGA up to 1920×1080 @  60 Hz Audio Output / Input – HDMI, 3.5 mm jacks for Audio In and Out Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi. Options: Dual band Wi-Fi, GPS, NFC, and Bluetooth USB – 4x USB Host ports, 1x […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Andromium Transforms Your Smartphone into a mini Desktop PC (Crowdfunding)

Andromium Transforms Your Smartphone into a mini Desktop PC (Crowdfunding)

Mobile desktop convergence has been a buzz word for several years now, and people have tried to use their smarphone as a desktop PC for a while thanks to technologies like MHL, which allows an easy connection between a phone and TV. However, mobile operating systems such as Android are not really suited for desktop use, and it can be a frustrating experience, so there needs to be different user interface in desktop and mobile modes for an optimal user experience. Canonical is working on this, and Ubuntu Edge, an ambitious, but ultimately failed crowdfunding campaign, was part of the strategy for convergence. But a team of developers lead by an ex-Google employee has been designed a solution with a desktop OS (Andromium OS) and a docking station that let you use your smartphone as a phone on the go, and as a desktop computer while docked, with Andromium user […]