h.265 News - Page 4 of 33 - CNX Software

December 22, 2019December 23, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

SDMC DV8919 Amlogic S905X4 Android TV 10 TV Box Supports AV1 Decoding

We’ve previously covered several TV box & set-top box SoCs with support for the royalty-free AV1 video codec including Broadcom BCM7218X SoC, and Amlogic S805X2, S905X4, and S908X processors. But so far, apart from an AV1 demo on the RTD1311/RTD1319 development board (Pymparticle EVB?), and new about Technicolor Jade STB, I had not really seen AV1-capable TV boxes so far. SDMC DV8919 appears to be the first Amlogic S905X4 TV box on the market and one of the first running the recently released Android 10 on Android TV OS. SDMC DV8919 specifications: SoC – Amlogic S905X4 quad-core Arm Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G31MP2 supporting OpenGL ES3.2, Vulkan 1.1 and OpenCL 2.0 System Memory – 2GB DDR memory (options: 1GB or 4GB) Storage – 8GB eMMC flash (options: 16GB, 32GB, 64GB), MicroSD card slot Video Output – HDMI 2.1 up to 4K @ 60+Hz with CEC […]

October 28, 2019February 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

NanoPi M4V2 Kit Review – Part 2: FriendlyCore Desktop

We’ve already seen how to assemble NanoPi M4V2 metal case kit which offers an Arm mini PC solution with support for NVMe SSD. The new NanoPi M4V2 Rockchip RK3399 SBC is an evolution of the M4 board that brings faster LPDDR4 memory and adds power & recovery buttons. Since we’ve already tested several RK3399 SBC‘s and TV boxes, I planned to focus the review on thermal design evaluation (i.e. see how well the board cools), and see how memory bandwidth evolved from LPDDR3 to LPDDR4. I wanted to do so both with Linux and Android, since I could compare NanoPC-T4 (LPDDR3) benchmarks in Android. But this requires an eMMC flash module, and I don’t own any. So instead I planned to run Armbian because of support for armbian-monitor for nice temperature chart but it’s not working just yet, so instead I’ve done all tests with FriendlyCore Desktop (rk3399-sd-friendlydesktop-bionic-4.4-arm64-20190926.img) based on […]

October 23, 2019November 24, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Khadas VIM3L SBC Review with Android 9 Firmware

Khadas VIM3L is the first and so far only Amlogic S905D3 SBC on the market, so I first ran some benchmarks and checked system info. But it is also designed to be an HTPC, I’ll continue the review with some 4K video and audio playback testing, some gaming, and I/O benchmarks. Khadas VIM3L Unboxing As you may remember (or not), VIM3L ships either as a bare board pre-loaded with Android 9 or as an HTPC kit with the board running CoreELEC. I’ve received the bare board which also comes with two WiFi antennas. It can do much more than a simple TV box however, since it also comes with an M.2 NVMe socket (extra adapter board required), and sockets with MIPI DSI + touchscreen, and MIPI CSI camera. It’s one of the few boards with a low profile Ethernet connector, so if you ever wanted to build a farm of […]

October 1, 2019March 16, 2020 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

X96 Air Amlogic S905X3 Android 9.0 TV Box Sells for $30 and Up

Amlogic S905X3 is the first Arm Cortex-A55 processor from the company, and we’ve seen it does not differ that much from the previous generation in our S905X3 vs S905X2 comparison. The Cortex-A55 cores have similar performance compared to Cortex-A53 cores., but S905X3 SoC does provide support for DDR4 memory up to 3200 MHz which may improve 4K HDR video playback and 3D gaming, as well a 1.2 TOPS NPU for AI workloads such as voice recognition. The first Amlogic S905X3 TV box launch we covered was Beelink GT2 Mini with price starting at just under $50 for the 2GB/16GB version and $70 with 4GB and 64GB RAM. Prices have now somewhat come down, but if you’re looking for a cheaper model X96 Air is now offered on Aliexpress for $29.39 including shipping with 2GB RAM, 16GB flash, while the 4GB/32GB variant is sold for $38.01, and up to $40.95 with […]

June 26, 2019June 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

4K Video Playback on Raspberry Pi 4 with LibreELEC (Alpha)

In my short Raspberry Pi 4 review, I tested 4K video output and playback in Raspbian, and sadly neither are working properly, with video output stuck to 1080p60 even after selecting 4K HDMI in the settings and yes, I double checked for “hdmi_enable_4k=1” in config.txt, while H.265 video playback is still clearly using software decode in both VLC and omxplayer. However, LibreELEC team announced support for Raspberry Pi 4 in LibreELEC 9.2 Alpha1 release based on Kodi 18.3 and Linux 4.19.x. So I downloaded LibreELEC-RPi4.arm-9.1.001.img.gz and flash it to a microSD card with balenaEtcher. The good news is that I could manually set the resolution to 3840×2160 and confirm it works with my TV, but the refresh is limited to 30 Hz maximum. Other refresh rates currently available include 23.98 Hz, 24 Hz, 25 Hz, and 29.97 Hz. The hardware is capable if 4K 60Hz, so it’s just a question […]

June 24, 2019June 25, 2019 by Jean-Luc Aufranc (CNXSoft) - 140 Comments

Raspberry Pi 4 Features Broadcom BCM2711 Processor, Up to 4GB RAM

Long expected, the Raspberry Pi 4 model B has finally launched, and it should not disappoint with a much more powerful Broadcom BCM2711 quad-core Cortex-A72 processor clocked at up to 1.5 GHz, 1 to 4GB LPDDR4, 4K H.265 video decoding and output support, a proper Gigabit Ethernet port, as well as USB 3.0 and 2.0 ports. Raspberry Pi 4 comes with all those extra features, but the form factor remains the same, and importantly the price is still $35 for the version with 1GB RAM, making Raspberry Pi alternatives suddenly much less interesting. Raspberry Pi 4 specifications: SoC – Broadcom BCM2711 quad-core Cortex-A72 (ARMv8) @ 1.5GHz with VideoCore VI GPU supporting OpenGL ES 3.0 graphics System Memory – 1GB, 2GB or 4GB LPDDR4 Storage – microSD card slot Video Output & Display I/F 2x micro HDMI ports up to 4Kp60 (Currently 1080p60 max. in dual-display configuration, although 2x 4Kp30 is […]

April 13, 2019April 29, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Zidoo Z1000 4K Android Media Player to Feature Realtek RTD1296DD Processor

Zidoo previously introduced several Reatek RTD1296 4K Android media players with their high-end Zidoo X20/X20 Pro models, followed by the lower cost Zidoo Z9S & Z10 units. The company is now about to launch yet another model based on the processor with Zidoo Z1000 4K UHD media player that should offer an option between the higher-end models and the company’s entry-level options. Zidoo Z1000 specifications: SoC – Realtek RTD1296DD quad core Cortex A53 processor with Arm Mali-T820 MP3 GPU System Memory – 2 GB RAM Storage – 16 GB eMMC flash, 1x SATA 3.0 bay for 2.5 or 3.5″ drive, 1x external SATA port Video 1x HDMI 2.0a output up to 4K @ 60 Hz with HDR10 support 1x HDMI 2.0 input supporting PiP, stream recording, and UDP broadcasting 1x RCA composite output Decode – HDR10, 10-bit HEVC / H.265 up to 4K @ 60fps, VP9 up to 4K @ […]

January 14, 2019January 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

SEI 520 is a 2-in-1 Android TV Hybrid Set-top Box and Smart Speaker

SEI Robotics has showcased a new device at CES 2019 that looks like a smart speaker, and SEI 520 is indeed a smart speaker with Google Assistant support, but it also adds a digital TV tuner and a quad-core Cortex A53 processor running Android TV 9.0 operating system to allow you to watch live TV, and stream videos. Preliminary specifications for SEI 520 smart speaker: SoC – Quad core Arm Cortex-A53 processor, possibly Amlogic S905X2 System Memory – 2GB RAM Storage – 16GB eMMC flash Video Output – HDMI up to 4K UHD Video Decode – VP9 and H.265/HEVC Audio Output – HDMI audio + optical S/PDIF Input – Far-field microphone Speaker – No technical details provided Connectivity – Ethernet, 2T2R MIMO WiFi, Bluetooth 5.0 Tuner – DVB-S2X/T2/C, ATSC, ISDBT USB – 1x USB 3.0 port, 1x USB 2.0 port Misc – IR blaster Power Supply – 12V DC via […]