wifi News - Page 29 of 97 - CNX Software

November 5, 2021November 21, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Playing with Sonoff Zigbee & WiFi automation – Part 1: Hardware overview

Sonoff T2 Switch Zigbee Bridge Motion Sensor

I don’t think I’ve ever used Zigbee, but I’ll soon have the opportunity as ITEAD sent me the Sonoff ZBBridge gateway, a Sonoff T2 2-gang WiFi switch as well as a Zigbee motion sensor. I had reviewed several Sonoff devices in the past, but it had been over three years that I hadn’t. ITEAD recently contacted me basically telling me I could select whatever I wanted from their product list for a review on CNX Software. Since I had reviewed several of the company’s WiFi smart sockets, smart switches, and a light bulb, I had less to play with, and then I thought it might be fun to play with Sonoff Zigbee products. But I did not own any Zigbee hardware, so I had to think about a use case. I have a small annoyance in the house I rent. When we come back at night, we have to leave […]

October 28, 2021October 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Raspberry Pi Zero 2 W and Zero W features comparison

Rapsberry Pi Zero W vs Raspberry Pi Zero 2 W

The Raspberry Pi Zero 2 W quad-core board has just launched, and in this post, we’ll look at how the new board compares to the original Raspberry Pi Zero W SBC. From the photos above they are nearly identical, but looking at the detailed specifications, we’ll find some interesting differences. So the main reasons to get a Raspberry Pi Zero 2 W over a Raspberry Pi Zero W is the extra performance enabled by the quad-core Cortex-A53 processor and possibly better wireless performance. The downsides are at the new board costs $5 more, and power consumption might be higher, but this would have to be tested under various scenarios. Another reason you may end up getting the Zero 2 W board that is not shown in the specifications is the recent shortage of chips, so the new board may be more likely to be in stock at your local distributor. […]

October 28, 2021October 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 35 Comments

$15 Raspberry Pi Zero 2 W launched with quad-core CPU, 512MB RAM

Raspberry Pi Zero 2 W is the first quad-core SBC from the Raspberry Pi Foundation with the Raspberry Pi Zero form factor. Based on the RP3A0 system-in-package (SiP) comprised of a Broadcom BCM2710A1 quad-core Cortex-A53 processor and 512MB LPDDR2, the new Pi Zero W 2 board offers the exact same interfaces as its predecessor. This includes a MicroSD card socket, a mini HDMI port, two micro USB ports, a MIPI CSI-2 camera connector, as well as an unpopulated 40-pin GPIO header. The wireless module appears to have changed but still offers WiFi 4 and Bluetooth 4.x BLE, and it’s using the same VideoCore IV GPU to handle 3D graphics and video encoding and decoding up to 1080p30. Raspberry Pi Zero 2 W specifications: SiP – Raspberry Pi RP3A0 system-in-package with: SoC – Broadcom BCM2710A1 quad-core Arm Cortex-A53 @ 1GHz (overclockable to 1.2 GHz) with VideoCore IV CPU supporting OpenGL ES […]

October 27, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

CompuLab IOT-GATE-RPI4 gateway targets industrial control and monitoring

Compulab IOT-GATE-RPI4 CM4 industrial gateway

Compulab IOT-GATE-RPI4 is another industrial gateway based on the Raspberry Pi CM4 module that offers a different feature set and form factor compared to solutions like TECHBASE iModGATE-AI gateway or QWave Systems CatsPi Industrial carrier board. Designed with industrial control and monitoring in mind, the IOT-GATE-RPI4 gateway offers multiple RS485, RS232 and CAN FD ports, Ethernet, 4G LTE/4G, WiFi 802.11ac, and Bluetooth 5.0 connectivity, as well as a wide -40°C to 80°C operating temperature range, plus a wide input voltage from 8V to 36V as well as PoE support. Compulab IOT-GATE-RPI4 specifications: SoM – Raspberry Pi Compute Module 4 (CM4) with SoC – Broadcom BCM2711 quad-core ARM Cortex-A72 @ 1.5GHz plus VideoCore IV GPU with H.265 (4Kp60 decode), H.264 (1080p60 decode, 1080p30 encode) System Memory – 1GB to 8GB LPDDR4 Storage – 16GB to 128GB eMMC flash soldered on-board Secondary Storage – 64GB – 256GB NVMe flash via optional module […]

October 21, 2021October 26, 2021 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

M5Stamp C3 RISC-V board supports WiFI 4, Bluetooth 5.0 Long Range and 2 Mbps bitrate

It was only last month that M5Stack launched the M5Stamp Pico module based on an ESP32-PICO-D4 SiP and heat-resistant plastic shell, but M5Stamp C3 board is already out with most of the same specifications and features but an ESP32-C3 RISC-V SoC replaces the ESP32 dual-core Xtensa processor. M5Stamp C3 offers WiFi 4 and Bluetooth 5.0 with high bitrate and long-range connectivity and comes with the same heat-resistant plastic shell, but the company also highlights the RSA-3072-based secure boot and the AES-128-XTS-based flash encryption as a more secure way to address Bluetooth security concerns. M5Stamp C3 specifications: WiSoC – ESP32-C3FH4 32-bit single-core RISC-V processor @ up to 160 MHz, with 384KB ROM, 400KB SRAM, 8KB RTC SRAM, 4MB embedded flash, WiFI and Bluetooth Connectivity 2.4 GHz WiFi 4, 20 MHz and 40 MHz bandwidth, IEEE 802.11 b/g/n protocol, up to 150 Mbps Bluetooth 5, Bluetooth mesh, with supports for 125 Kbps, […]

October 18, 2021October 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

HarmonyOS development board shows up for $11

Last year, we noted the Hisilicon Hi3861 based HiSpark WiFi IoT development board with supports LiteOS and HarmonyOS that was available in China for just under $10, or as part of a devkit with baseboard and modules for around $60. Although not very practical, buying from Taobao was possible, but there’s now what appears to be a new revision of the Hi3861V100 based HarmonyOS development board in a wider form factor on Banggood for $10.99. Hi3861 development board specifications: MCU – Hisilicon Hi3861V100 32-bit RISC-V microcontroller @ up to 160 MHz with 352 KB SRAM and 288 KB ROM, 2 MB flash memory, and WiFI 4 connectivity; QFN-32 5x5mm package WiFi 802.11b/g/n standard up to 72.2 Mbps @ HT20 2.4 GHz frequency band (ch1-ch14). Station (STA) and access point (AP) modes with up to 6 clients for the latter WiFi mesh with up to 256 nodes Security – WPA, WPA2 […]

October 13, 2021October 13, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

NETGEAR RBKE963 Orbi quad-band WiFi 6E mesh system delivers up to 10.8Gbps speed

NETGEAR Orbi quad-band WiFi 6E mesh system

NETGEAR RBKE963 Orbi quad-band WiFi 6E mesh system delivers wireless connectivity through the home with one router and two satellites with a maximum wireless link of 10.8 Gbps. one 10GbE WAN port for Internet connectivity, and several 2.5GbE and Gigabit Ethernet LAN ports. Powered by a quad-core 2.2GHz processor, the mesh system supports 2.4 GHz, 5.2 GHz, 5.8 GHz, and the new 6 GHz band offered by WiFI 6E, covers an area of up to around 840 square meters, and supports up to 200+ clients. NETGEAR RBKE963’s router and satellites share most of the same specifications: SoC – Unnamed quad-core processor @ 2.2 GHz (likely Qualcomm Networking Pro 1610 Platform) Memory & Storage RBRE960 router – 1 GB RAM, 512MB NAND flash RBSE960 satellites – TBD WiFi connectivity Radio 1: IEEE 802.11b/g/n/ax 2.4GHz with 1024-QAM support up to 1200 Mbps Radio 2: IEEE ® 802.11a/n/ac/ax 5GHz with 1024-QAM support up […]

October 6, 2021October 7, 2021 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Amlogic S905W4 TV Box ships with Amlogic W1 WiFi 5 module

Amlogic S905W4 TV Box with Amlogic W1 WiFi 5

As I just posted about MediaTek Filogic 830/630 WiFi 6/6E chip, I was informed that Amlogic may have its own WiFi chip as “W1” module showed up in the SDK’s source code. It turns out there’s at least one TV box with Amlogic W1 802.11b/g/n/ac module/chip?, namely X96 Mini+, that also happens to come with an Amlogic S905W4 quad-core Cortex-A53 processor we’ve never covered on CNX Software. Apart from the new processor and WiFI module, X96 Mini Plus is your typical entry-level 4K TV box with up to 2GB RAM, 16GB storage, HDMI 2.0 video output, composite video output, Ethernet, and a couple of USB ports. X96 Mini Plus specifications: SoC – Amlogic S905W4 quad-core Arm Cortex A53 @ 1.2GHz with penta-core Mali-450MP GPU @ 750MHz System Memory – 1 or 2GB DDR3 Storage – 8GB or 16GB eMMC flash, microSD card slot Video Output – HDMI 2.0a up to […]