Freescale announced the new Vybrid platform based on Cortex A5 application processor and Cortex-M4 MCU (VF6xx and VF7xx family only) which targets building/home automation and control, industrial automation, point-of-sale systems, medical devices, smart energy equipment, and appliances.
There are 5 families of Vybrid Controllers which support the following common features:
- Video/Camera Interface Unit + optional OpenVG GPU (except VF3xx)
- Up to 800 MHz data rate DDR3 and LPDDR2 support (except VF3xx)
- USB 2.0 OTF with Integrated PHY (1 or 2 depending on model)
- Ethernet 10/100 MAC (1 or 2 depending on model)
- Display controller (WQVGA to XGA resolutions)
- High-assurance boot with Crypto Acceleration
- Up to 1.5 MB on chip SRAM
- NAND Flash controller and Dual Quad-SPI with eXecute-In-Place(XIP)
- Dual 12-bit ADC and DAC
Here are the 5 families of Vybrid platforms and key differentiating features:
- VF3xx: ARM Cortex-A5 up to 266 MHz, 1x USB 2.0 OTG, 2x Ethernet, display up to WQVGA resolution (400 x 240)
- VF4xx: ARM Cortex-A5 up to 500 MHz, 2x USB 2.0 OTG, 1x Ethernet, display up to XGA resolution (1024 x 768)
- VF5xx: ARM Cortex-A5 up to 500 MHz, 2x USB 2.0 OTG, 2x Ethernet,display up to XGA resolution (1024 x 768)
- VF6xx: ARM Cortex-A5 up to 500MHz and Cortex-M4, 2x USB 2.0 OTG, 2x Ethernet, display up to XGA resolution (1024×768)
- VF7xx: ARM Cortex-A5 up to 500 MHz and Cortex-M4, 2x USB 2.0 OTG, 1x Ethernet, display up to XGA resolution (1024 x 768) and Video ADC
The lower-end devices (VF3xx to VF5xx) target low power application processing, whereas high-end solutions (VF6xx and VF7xx) target high-resolution graphical displays, connectivity and real-time support.
The Vybrid platform supports operating systems such as Linux and Freescale MQX RTOS either running one at a time or concurrently (e.g Linux on Cortex A5 and MQX RTOS on Cortex M4). Freescale will also provides a set of software stacks via its MQX Solutions including acommunication (RTCS), file system (MFS) and USB host/device stacks. Supported development tools include ARM DS5 and Freescale MQX Design and Development Tools.
The Freescale Vybrid platform and corresponding software and tools will be available in Q3 2012 (first samples in Q2 2012). I could not find information about development boards for the time being. They will use a Virtual Hardware Platform for development at this stage and demo the platform this week at Design West.
|Support CNX Software - Donate via PayPal or become a Patron on Patreon|