ODROID-N2 CoreELEC Edition Media Center Launched for $65 and Up

ODROID-N2 CoreELEC Edition

ODROID-N2 is an Amlogic S922X single board computer with 2GB or 4GB  RAM that’s fairly popular thanks to its great performance/price ratio, good cooling, and decent support from Hardkernel. Hardkernel have worked in collaboration with CoreELEC, and have just introduced ODROID-N2 CoreELEC Edition media center featuring the SBC. The company offers the media center at introductory prices of $65 for the 2GB RAM model, and $75 for the 4GB model with limited stocks at those discounted prices. ODROID-N2 CoreELEC Edition media center includes the following: ODROID-N2 SBC with either 2GB or 4GB RAM ODROID-N2 Case Black An 8GB Industrial MicroSD UHS-1 card pre-loaded with CoreELEC for ODROID-N2 preinstalled 12V/2A Power Supply (with chosen type of plug) CoreELEC Logo Sticker CoreELEC for ODROID-N2 supports 4K HDR10 and HLG high dynamic-range, Auto frame rate switching & dynamic range matching,  DTS-HD & Dolby-HD audio pass-through including DTS:X and Dolby Atmos. The firmware is based on the Kodi Leia and ODROID-N2 is said to …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Beelink GT-King (Amlogic S922X) TV Box Review

Beelink GT-King YouTube App

Rant Karl here. I have been playing around with Android boxes for several years. Unfortunately, some fundamental issues from when I first started playing around with these boxes are still there. They have come a long way since the MK808 with Rockchip RK3066 processor. The MK808 was my first endeavor into Android on the TV in 2013.  I can’t believe it’s been nearly 6 years. In 2014 Google introduced Android TV and the Nexus Player. It was designed for a TV and controller. The first boxes/sticks adapted the stock Android experience to run on a TV, but without a touch interface the experience was/is not optimal. Sure you get thousands and thousands of apps but a lot of them don’t work. Unfortunately, this hasn’t changed much. If these boxes came with Linux and Android I don’t think I would complain as much. I would consider it a tinkering box. But these boxes are targeted at the average home user and …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Innocomm Unveils MediaTek i300/i500 SoMs for IoT and AI Applications

SB30 MTK i300 and SB50 MTK i500 AI IoT Platforms Just announced by Innocomm are the SB30 and the SB50 SoMs carrying the MediaTek i300 and i500 SoC’s, and running either Linux or Android. The rundown on the systems is the MediaTek AIoT processor series has been out for some time, and we reported on the latest SoC in the MediaTek i700 article last July. Innocomm is also known for its NXP-based compute modules such as the i.MX8M Mini driven W15 and i.MX8M powered W10. MediaTek i300 Specs The MediaTek i300 (MT8362) SoC is running a Cortex-A35 power-efficient quad-core processor clocking at 1.5 GHz. The SoC is further equipped with an Imagination PowerVR Series8XE GE8300 GPU. The i300 also integrates a PMIC, an RF chip for 2.4 GHz 802.11/b/g/n as well as Bluetooth 4.0. There is support for the MediaTek MT7668 chipset for 802.11ac (WiFi 5). Rounding out the system is a 13 megapixel and 720P ready ISP with an …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Getting Started with ANAVI Gas Detector Starter Kit and Home Assistant

ANAVI ESP8266 Gas Detector Display

ANAVI Gas Detector is an ESP8266 based board designed for MQ gas sensors supported by Arduino. This allows you to easily monitor air quality, or more accurately air conductivity using MQ-135 sensor as part of the starter kit either visually on the OLED display, or through your smartphone or computer using MQTT via automation platform such as Home Assistant. Leon Anavi sent me an ANAVI Gas Detector Starter Kit to have a look, and I’ll report my experience with the kit using it standalone, and through Home Assistant. Starter Kit Unboxing The kit contains the open-source hardware, ESP8266 based ANAVI Gas Detector board, a plastic stand, an OLED display, a USB to serial adapter, a gas sensor, and a few KiCad and ANAVI stickers. The board itself comes with an ESP8266MOD module, features a micro USB port for power, a reset button, four LEDs, a UART console, a 4-pin GPIO header, three I2C headers for sensors, a 4-pin connector for …

Support CNX Software – Donate via PayPal or become a Patron on Patreon