Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

November 26, 2020December 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 109 Comments

Rockchip RK3588 specifications revealed – 8K video, 6 TOPS NPU, PCIe 3.0, up to 32GB RAM

Rockchip RK3588 is one of the most anticipated processors for the year on this side of the Internet with the octa-core processor features four Cortex-A76 cores, four Cortex-A55 cores, an NPU, and 8K video decoding support. [Update December 2021: check out our post with the RK3588 datasheet for the latest details about the processor] The roadmap shows an expected launch date in Q3/Q4 2020, but sadly the release date will be pushed back in the future. Having said that, the Rockchip Developer Conference (RKDC) is now taking place, and the company has put up a poster that reveals a bit more about the processor. That means we now have more detailed Rockchip RK3588 specifications: CPU – 4x Cortex-A76 and 4x Cortex-A55 cores in dynamIQ configuration GPU – Arm Mali “Odin” MP4 GPU AI Accelerator – 6 TOPS NPU 3.0 (Neural Processing Unit) VPU – 8Kp60 video decoding support, 8Kp30 encoding […]

November 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Allwinner H6 SBC offers dual Ethernet, four display outputs, M.2 expansion

While the processor was introduced in 2017, there are only a few Allwinner H6 SBC’s on the market with, for instance, Orange Pi 3 or Pine H64 boards, and it never became as popular as solutions based Allwinner H3 processor. But Boardcon has now launched its own Allwinner H6 SBC targeting professionals with Boardcon EMH6 board combining a carrier board and a computer-on-module that can be integrated into products. Boardcon EMH6 specifications: Core module SoC – Allwinner H6 quad-core Arm Cortex A53 processor with Arm Mali-T720 GPU with support for OpenGL ES3.1/3.0/2.0/1.1 System Memory – 1GB LPDDR3 Storage – 8GB eMMC Storage – MicroSD card slot, M.2 slot for NVMe SSD Video Output 1x HDMI 2.0a up to 4Kp60 1x CVBS interface 1x RGB interface or 2x eDP interface via NCS8801S RGB-to-eDP converter Backlight header Camera – 24-pin connector compatible with 13MP OV13850 camera sensor Audio – Optical S/PDIF output, […]

November 25, 2020December 4, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Raspberry Pi 4 V3DV graphics driver achieves Vulkan 1.0 conformance

Just a couple of weeks ago, we reported on the status of Raspberry Pi 4 Vulkan driver & future plans based on a presentation made by Igalia at the Open Source Summit 2020 at the end of October. At the time, the V3DV Vulkan Mesa driver for Raspberry Pi 4 was merged into Mesa, passed over 100,000 tests in the Kronos Conformance Test Suite (CTS), and was said to implement the full Vulkan 1.0 API. So it should come as no surprise that Khronos has now declared the Raspberry Pi drivers to be conformant with Vulkan 1.0 specifications. This was tested in Raspberry Pi OS with Linux 5.4.51 using X11 display server at 1920×1080 resolution on Raspberry Pi 4. Vulkan 1.0 conformance means the V3DV Mesa driver has passed all tests from Khronos CTS and should be compatible with most applications using this version of the API. The drivers will […]

November 24, 2020November 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Raspberry Pi 400 kit ships with 7-inch or 13.3-inch touchscreen display

The Raspberry Pi Foundation has recently launched the Raspberry Pi 4 keyboard computer with impressive performance thanks to a well-designed cooling solution, and I think it’s a great tool for kids (and adults) who may want to carry a Raspberry Pi around. However, you’d still need a display in each location, so until the foundation releases the Raspberry Pi 4000 laptop next year (full disclose: I made that up!), it might be cool to have a portable display coming with the keyboard PC. That’s what Waveshare is offering with two kits combining a Raspberry Pi 400 together with a 7-inch or 13.3-inch HDMI touchscreen display and other accessories. Not quite as portable as a laptop but it gets close. Here’s the full list of accessories in the kits: Raspberry Pi 400 Kit with keyboard PC with UK keyboard (sadly the only layout option for now), power supply, HDMI cable, preloaded […]

November 24, 2020November 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

MINIX NEO P1 tiny 66W GaN USB-C power supply can handle up to 3 devices

I’m now using MINIX NEO P2 GaN USB-C charger for all review using USB powered devices. But with four-ports and up to 100W of power, it’s a bit over-powered for one or two Raspberry Pi 4 or equivalent SBCs, and it also costs around $60. So the Hong Kong company has now introduced a new model with MINIX NEO P1 being a tiny 66W GaAN USB-C power adapter with two USB-C ports and one USB Type-A port and international plug adapters that make ideal to use on the go. MINIX NEO P1 key features and specifications: Power Input – 100-240V AC input with 2-prong US plug and adapters for EU, UK, and AU Power Output Up to 66 W in total 2x USB Type-C ports support up to 65 W with USB PD 3.0 (5-15V/3A, 20V/3.25A) 1x USB Type-A port supports up to 36 W with QC 3.0 (5V/3A, 9V/3A, […]

November 24, 2020November 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Pine64’s PINECIL RISC-V soldering iron launched for $25

We’ve previously mentioned PINECIL RISC-V soldering iron during Pine64’s release of PineCube open-source IP camera development kit, and the good news is the soldering iron is now available for $24.99 on Pine64 store together with optional sets of gross or fine soldering tips compatible with the one used with TS100 model The soldering iron is powered by GigaDevice GD32VF103TB 32-bit RISC-V general-purpose microcontroller and features a small display and two buttons for user interaction, as well as changeable tips. It can be powered by a USB-C power adapter or a 12 to 24V power brick such as the ones you’d found with laptops. PINECIL soldering iron key features and specifications: MCU – GigaDevice GD32VF103TB 32-bit RV32IMAC RISC-V “Bumblebee Core” @ 108 MHz with 128KB flash, 32KB SRAM Display – 0.69-inch OLED monochrome display with 96×16 resolution Tip – 106mm long, Type B2 Temperature range – 100°C to 400°C; reaches operating […]

November 23, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$89 Lite3DP resin 3D printer fits in the palm of your hand (Crowdfunding)

I thought Selpic A-star 3D printer we recently covered was already small, but if you’re looking for an ultra-portable printer, it will be hard to beat the Arduino-based, open-source hardware Lite3DP resin 3D printer that can fit in the palm of your hand, and weighs just around 350 grams. That also means a pretty small build volume of just 45.1 x 33.8 x 70 mm, so it’s really for small objects, and for instance, a typical Raspberry Pi case could not be printed. But let’s have a look. Lite3DP printer’s key features and specifications: Electronics – All-in-one PCB with Arduino Pro Mini, a driver for the stepper motor, a module for a microSD card, and a screen with dual-functionality. Technology – MSLA // LCD-SLA Resolution – XY: 0.14 mm; Z: 0.05 and 0.1 mm Build volume (W x L x H) – 45.1 x 33.8 x 70 mm Tray volume […]

November 23, 2020September 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

ASUS unveils Tinker Board 2 SBC with faster Rockchip RK3399/OP1 processor

ASUS surprised the maker community in 2017 with the introduction of the Rochchip RK3288 powered Tinker Board to compete as Raspberry Pi 3 Model B. It was followed by Tinker Board S with built-in storage and other new features, as well as Tinker Board Edge T and Edge R SBC’s both with an AI accelerator namely Google Edge TPU and the NPU inside Rockchip RK3399Pro. The company has now launched a new model called Tinker Board 2 without AI accelerator, but featuring Rockchip RK3399, or more exactly the higher grade Rockchip OP1 used in Chromebooks, delivering 96% faster single-thread performance and a 64% boost in multi-core performance compared to the Rockchip RK3288 processor found in the original Tinker Board, while the GPU is around 28% faster with glmark2-es2 off-screen benchmark. There are two variants of the board with Tinker Board 2 and Tinker Board 2S with the latter adding onboard […]