Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

June 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Dune HD RealBox 4K TV Box Runs Android and Linux on Realtek RTD1395 SoC

Realtek RTD1395 processor is designed for 4K HDR TV boxes and set-top boxes. Equipped with a quad-core Cortex-A53 processor and Mali-470 GPU it offers a lower-cost alternative to Realtek RTD1295 and RTD1296 with the same 4K video processing and playback capabilities. So far, we had seen it in TV boxes designed for operators and Banana Pi BPI-M4 single board computer, but Dune HD RealBox 4K TV box is the first RTD1395 consumer device sold directly to end-users. Dune HD RealBox 4K specifications: SoC – Realtek RTD1395 quad-core Cortex-A53 processor with Mali-470MP4 GPU System Memory – 2 GB RAM Storage – 16 GB flash, MicroSD card slot Video Output – HDMI 2.0a up to 4Kp60 HDR and AV port (composite) Audio – Optional S/PDIF, analog stereo audio via AV port, digital audio via HDMI port; HDMI audio pass-through to AV receiver Video Playback 4Kp60 HDR/HDR10+ with 10-bit H.265 and VP9 profile-2, […]

June 12, 2020June 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Qualcomm IPQ8074 Embedded Board Offers 802.11ax WiFI 6 12×12 MIMO DBDC Connectivity

Qualcomm IPQ8074 802.11ax WiFi 6 SoC was first unveiled in 2017 and designed for high-end routers, gateways, and access points supporting up 12×12 MIMO configuration (8×8 5GHz + 4×4 2.4 GHz) using Dual-Band Dual Concurrency (DBDC). I was just informed about a Qualcomm IPQ8074 embedded board going under the names DR8074A or HK01 depending on the company promoting it, respectively Wallys Communication and Compex. Qualcomm IPQ8074 embedded board (AP.HK01) specifications: SoC – Qualcomm Atheros IPQ8074A quad-core Arm Cortex A53 processor 2.2GHz CPU System Memory – 1GB (2x 512MB) DDR3L RAM (Option for up to 4GB) Storage – 8GB eMMC flash, 32MB NOR Flash, 256MB NAND flash, 1x micro SD Card socket Connectivity Wired 5x Gigabit Ethernet (1GbE) RJ45 ports 1x 10Gigabit Ethernet (10GbE) RJ45 port 1x SFP+ Port WiFi On-board 4×4 2.4GHz MU-MIMO 802.11b/g/n/ax WiFi 6 up to 1147Mbps On-board 2x(4×4) or 8×8 5GHz MU-MIMO 802.11a/n/ac/ax WiFI 6 up to […]

June 12, 2020June 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Orange Pi 4 SBC Gets a $16 4G LTE mini PCIe Card based on Rockchip RM310

Orange Pi 4 SBC is one of the most cost-effective Rockchip RK3399 SBC’s, as it sells for as low as $50 with 4GB RAM, Gigabit Ethernet, WiFi, and Bluetooth, HDMI 2.0 output, etc.. The board also comes with a 24-pin PCIe connector that’s not of much use on its own, so the company introduced a $4 PCIe adapter board providing access to a standard mPCIe socket and a SIM card slot so you could install your own. 4G mini PCIe cards can easily cost around $50 or more, but Shenzhen Xunlong Software has now launched its own 4G LTE mini PCIe card based on Rockchip RM310 module and sold for $16 on Aliexpress, excluding shipping. mPCIe card and RM310 module specifications: Frequency bands LTE-FDD – B1, B3, B5, B8 LTE-TDD – B38, B39, B40, B41 WCDMA – B1, B5, B8 GSM – 850, 900, 1800, and 1900 MHz Data rates […]

June 11, 2020June 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ROScube Pico SBC Runs Ubuntu & ROS on Intel Atom or Rockchip PX30 Processor

ADLINK has launched ROScube Pico SBC designed for robotics projects and powered by either an Intel Atom x5 Apollo Lake processor or a Rockchip PX30 Arm Cortex-A35 processor via their SMARC-compliant system-on-modules namely LEC-AL and as LEC-PX30. Both models run Ubuntu and ROS/ROS-2 operating systems simultaneously, and the company also provides NeuronBot robotics development and demo kit based on the SBC. ROScube Pico SBC and Devkit If ROScube Pico looks similar it’s because it appears to be based entirely on ADLINK previously announced ADLINK Industrial-Pi (I-Pi) SMARC Development Kit based on Rockchip PX30, and Vizi-AI development starter kit based on Atom x5-E3940 SoC and Movidius Myriad X VPU. Those are the specifications listed for ROScube Pico: SMARC Module For ROScube Pico NPS-1 – LEC-AL with Intel Atom processor, Intel Movidius Myriad X AI accelerator, 8GB LPDDR4 RAM, 32GB eMMC For ROScube Pico NPS-4 – LEC-PX30 with Rockchip PX-30 quad-core Cortex-A35 […]

June 11, 2020June 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Intel Launches Core i3/i5 Penta-Core Lakefield Hybrid Processors

Intel Lakefield Hybrid Processor Block Diagram

Intel unveiled plans for Lakefield Hybrid processors last year which combined a high-performance Sunny Cove core with four low-power Atom cores using Foveros 3D stacking technology and offering high peak single-thread performance and low power consumption for most tasks in a similar way to Arm’s big.LITTLE or DynamIQ technology. The company has now launched the first two penta-core Lakefield hybrid processors with Core i5-L16G7 and Core i3-L13G4 processors both with a 7W SDP (Scenario Design Power), but no TDP number which makes sense considering the Hybrid nature of the processor. Main features and specifications of the processors: Intel Core i3-L13G4 CPU – 1x high-performance Sunny Cove core @ 800 MHz / 2.8 GHz (Boost), 4x low-power Atom Tremont cores; All-core turbo boost: 1.3 GHz 4 MB Cache GPU – 48EU Intel UHD Graphics Gen11-LP @ 200 / 500 MHz with DX12, OpenGL4.5 API, and up to 4x independent displays Intel […]

June 11, 2020November 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

DFI Ryzen Embedded R1606G SBC Review – Part 2: Windows 10 Enterprise LTSC

DFI GHF51 is an AMD Ryzen Embedded R1606G SBC for industrial application that’s about the size of the Raspberry Pi Model B board, and after checking out the hardware in the first of part of the review “DFI GHF51 AMD Ryzen Embedded SBC Review – Part 1: Unboxing and Assembly“, I’ve now had time to play with the board running the pre-installed Windows 10 Enterprise LTSC operating system. DFI GHF51 Hardware Connections Since there aren’t any full-sized USB ports, you’ll need a USB-C hub to get started as you’ll probably want to connect a USB keyboard and mouse for development and testing, as well as a Micro HDMI cable to connect to a TV or display. I tried both MINIX NEO C Plus and Dodocool DC30S USB Type-C hubs, and the former did not work at all, while the latter mostly worked. I also connected an HDMI cable to the […]

June 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

PineTab 10.1″ Linux tablet Launched for $99.99 with UBPorts OS

As expected, Pine64 PineTab Linux tablet with Allwinner A64 processor, 2GB RAM, and a 10.1″ touchscreen display has just launched for $99.99 or $119.98 with a detachable backlit keyboard on Pine64 Store. Note those are pre-orders with shipping scheduled for the end of July. PineTab won’t shatter performance records with a quad-core Cortex-A53 processor with Mali-400MP GPU, 2GB RAM, 64GB eMMC flash, but it’s one of the rare Linux tablets on the market, and certainly the most affordable. The tablet offers a decent set of features too with a 10.1″ 720p capacitive display support for M.2 SATA SSD, Mini HDMI output, front-facing, and rear cameras, built-in WiFi and optional 4G LTE via the M.2 socket. It also comes with a 6,000 mAh battery that should be good for many hours. PineTab also leverages all the software work done since the launch of Pine A64 board in 2016 including mainline U-boot […]

June 10, 2020June 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

TTGO T-Internet-POE Board Provides Ethernet, PoE, WiFi, Bluetooth for $16

We’ve written about several ESP32 POE boards in the past including wESP32, but there’s now another one with LilyGO TTGO T-Internet-POE board offering Fast Ethernet, PoE, as well as WiFI and Bluetooth connectivity through ESP32-WROVER-B module. TTGO T-Internet-POE specifications: Wireless Module – ESP32-WROVER-B with ESP32 dual-core WiSoC, 4MB flash, 8MB PSRAM Storage – MicroSD card socket Connectivity 2.4 GHz 802.11b/g/n WiFi 4 and Bluetooth 5.1 via ESP32 10/100M Ethernet via LAN8720A Ethernet PHY Expansion – Unpopulated I/O header with UART, SPI, I2C, PWM, I2S, ADC; 3.3V I/O voltage Debugging / Programming Serial port via USB-C port and CP2104 USB to TTL chip (TBC) 6-pin programming interface with Tx/Rx, IO0, Reset, 3.3V and GND Misc – BOOT and reset buttons, 32.768MHz crystal oscillator Power Supply 5V via USB-C port up 50V PoE via Pulse PA2369NL transformer and HanRun HR861153C PoE compliant RJ45 jack SI3404 power management chip Dimensions – 70 x […]