Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

January 20, 2016July 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Getting Started with NavSpark mini GPS Module

I noticed NavSpark mini GPS module a couple of weeks ago, and since it was free, not including $10 for shipping, I went ahead and ordered. Since the freebie got popular, SkyTraq took some time to ship it, and when they did they provide a “not trackable” tracking number, which I’m not sure what that means as I could track the parcel from Taiwan to Thailand using 17track website without issues. The packages included NavSpark mini and a USB to TTL module as described, so I insert both and connect VCC, GND, and UART as shown on the pictures on the product page. I also connected the GPS antenna from LinkIt ONE development kit to the uFL connector on NavSpark mini, as well as a micro USB to USB cable to my computer. If you don’t have such antenna, you’ll need to add the $9 GPS/GLONASS antenna on NavSpark website […]

January 20, 2016January 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

WAVIoT LPWAN Technology Powers Low Cost Smart Water and Electricity Meters

With the rise of IoT and M2M applications, more and more Low Power Wide Area Network (LPWAN) standards have been launched or being worked on, such as Sigfox, LoRa, 802.11ah “Hallow”, Weightless, etc… with all promising long range, low power consumption, and support for a high number of nodes. WAVIoT, a US startup founded in 2011, has decided to create its own solution called WAVIoT Nb-Fi (Narrowband Fidelity) that works in ISM bands, offers up to 50km line-of-sight range, supports up to 2 million nodes by gateway, lasts over 20 years on a small battery, and with WAVIoT said to cost as low as $2 per node. The technology is already available in smart electricity and water meters, and modules as shown in the picture below. Here are some of WAVIoT Nb-Fi technical specifications: DBPSK on physical layer of signal transmission; End-nodes transmit radio signal in 10-500 kHz bandwidth Minimum […]

January 20, 2016January 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Tronsmart Ara X5 Plus mini PC Comes with Faster Storage, 802.11ac WiFi, and Higher USB 3.0 Speeds

Tronsmart Ara X5 was one of the first Intel Atom Cherry Trail mini PCs to launch on the market. It came with an Intel Atom x5-Z8300, and the now typical 2GB RAM combined with 32GB flash. But in my review of Tronsmart Ara X5, I found out that the flash was quite slower than other Windows mini PC I tested, and the USB 3.0 port would not recognize my 1TB Seagate USB 3.0 hard drive. The company has now introduced an upgraded model simply called Tronsmart Ara X5 Plus with a faster Samsung eMMC 5.0 flash, faster USB 3.0 read and write speeds (and hopefully better compatibility), 802.11ac WiFi support by replacing Ampak AP6330 module by Intel Wireless-AC 3160 and adding an external antenna, as well as fixed some micro SD card compatibility issues, and an updated UEFI binary that should reduce blue screen of death appearances in Windows. The […]

January 20, 2016January 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

JaguarBoard is a $65 Single Board Computer Powered by Intel Atom Z3735G Processor (Crowdfunding)

While we have recently started to see low Intel Atom x5 “Cherry Trail” development boards such as UP Board and LattePanda, we have not really seen any Intel Atom Z3735F/G “Bay Trail” boards despite their popularity in mini PCs and TV sticks. JAGUAR ELECTRONIC H.K. aims to fill that avoid with their JaguarBoard single board computer powered by an Intel Atom Z3735G processor coupled with 16GB flash and 1GB RAM. JaguarBoard specifications: SoC – Intel Atom Z3735G quad core processor @ 1.33GHz / 1.83GHz (burst) with Intel HD graphics @ 311 MHz / 646 MHz System Memory – 1GB DDR3L RAM Storage – 16GB eMMC flash, 1x micro SD card slot up to 32GB Video Output – HDMI 1.4 @ up to 1080p Audio – HDMI, Line In and Line Out (stereo) 3.5mm jacks Connectivity – 10/100Mbps USB – 3x USB 2.0 Expansion Headers 8-pin header with 2x UART and I2C 4-pin […]

January 19, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Renesas GR-PEACH mbed Board Features RZ/A1H Processor with 10MB On-chip Memory

Renesas RZ/A1 ARM Cortex A9 processors were unveiled in 2013, and one of the differentiating feature was the large amount of on-chip SRAM with up to 10MB for RZ/A1H model. The following year, Renesas’ RZ/A1 professional development kit, and some RZ/A1H modules were launched, and I’ve now just seen a tweet about Renesas GR-PEACH development board that is mbed compatible, feature Renesas RZ/A1H processor, and happens to be pink. There are actually two models based on the same PCB: GR-PEACH normal without header, and a “WiFi” connector, and GR-PEACH Full with female headers and an Ethernet port. Both basically share the same specifications: SoC – Renesas RZ/A1H ARM Cortex-A9 Core @ 400 MHz with 10MB on-chip RAM, NEON and FPU, and 128KB L2 cache Storage – 8MB FLASH + micro SD slot Connectivity – Normal: Optional BP3595 WiFi module; FULL: 1x 10/100M Ethernet(Microchip LAN8710A); Both: Xbee connector (unpopulated) USB – […]

January 19, 2016January 26, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Ugoos UT4 Android 5.1 TV Box Review

Ugoos UT4 is one of many Rockchip RK3368 TV boxes available on the market today, but it’s one of the model with higher-end specifications including 2 GB RAM, and 16 GB flash, as well as Gigabit Ethernet and 802.11ac WiFi, Ugoos offers regular firmware updates for their devices, and as I found out in Ugoos UT4 specs and teardown post, the mini PC features a fan to keep the device cool at all times. Today, I’ll focus on reviewing the firmware including video playback capabilities, performance and whether advertised features work as they should. First Boot, Settings and First Impressions Before powering on the device, I connected some cables (Ethernet, HDMI, optical audio, AV to speakers), and made use of all four USB ports with a USB hard drive, a webcam, a keyboard, and a USB hub with two RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart […]

January 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MeLE Star Cloud PCG60 Plus Cherry Trail Mini PC Comes with HDMI and VGA Outputs, Gigabit Ethernet and More

Most Cherry Trail mini PCs on the market features only one video interface, usually HDMI, and only support 10/100M Ethernet. After introducing MeLE PCG03 Plus a few months ago, MeLE is about to launch a new Cherry Trail mini PC called Start Cloud PCG60 Plus that includes both HDMI and VGA video output, two USB 2.0, but also faster networking thanks to Gigabit Ethernet and 802.11ac. MeLE Star Cloud PCG60 specifications (highlights in bold show improvements over MeLE PCG03 Plus): SoC – Intel Atom x5-Z8300 “Bay Trail” quad core processor @ 1.44 GHz / 1.84 GHz (Turbo) with Intel HD Gen8 graphics System Memory – 2 GB DDR3L Storage – 32 GB eMMC + micro SD card slot up to 128 GB Video Output – HDMI 1.4, and VGA Audio I/F – HDMI, 3.5mm earphone jack Connectivity – Gigabit Ethernet, 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 USB – 2x USB […]

January 18, 2016January 18, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

96Boards Mezzanine Add-on Boards with Sensors, Buttons, Relays, etc.. Are Starting to Show Up

Beside excellent software support, and a great community, the two most popular maker boards on the market, namely Arduino and Raspberry Pi, also have many add-on boards, respectively called Shields and Hats, to expand their user and connect sensors, buttons, displays, and so on… Several Linaro’s 96Boards compliant development board launched last year such as LeMaker Hikey and DragonBoard 410c with support for recent versions of Android and Debian, and recently three Mezzanine add-ons boards, as well as somewhat pricey USB to TLL debug board, have started to show up to make it an even more interesting platform. Linker mezzanine card starter kit for 96Boards The first kit is made by LinkSprite and includes Linker Base Mezzanine Card with several sensors and cables. Eight 4-pin connectors with ADC, UART, I2C, and GPIOs allow you connect the eight sensors ad modules provided with the kit:a button module, a red LED module, […]