10,000 mAh Graphene power bank fully charges in 27 minutes (Sponsored)

Elecjet Graphene power bank

Most power banks are made of Lithium batteries that charge in 3 to 4 hours and are good for around 500 charge cycles. But Elecjet Apollo Ultra is a different beast equipped with a 10,000 mAh Graphene battery that enables fast charging in just 27 minutes and offers a much longer lifespan with over 2,500 charge cycles. In other words that means Apollo Ultra power bank is 5x faster and lasts 5x longer than most lithium-based power banks. Another way to look at it is that this graphene-enhanced 10,000mAh power bank can gather enough power in just 7 minutes to fully charge your phone. It can fast-charge your phone up to three times, charge two devices at once, and passthrough charging lets you charge Apollo Ultra at the same time. Elecjet Apollo Ultra specifications: Battery Capacity – 10,000 mAh or 40 Wh Full Charge Time – 27 minutes USB ports […]

Tiny, high-precision GPS modules target UAV’s, wearables (Sponsored)

tiny high-precision GPS modules

With the rapid development of the Internet of Things, positioning requirements are getting more strict notably with the need for higher precision and smaller GNSS modules. If you are looking for compact GPS modules that support a variety of satellite navigation systems, including China’s Beidou satellite navigation system BDS, the United States’ GPS, and Russia’s GLONASS with low power consumption (3.3V, 30mA), you may consider Ai-Thinker’s GP-01 and GP-02 GPS modules offering the smallest size. The GP-01 module has a total of 24 interfaces with five GPIO pins, while the GP-02 module has a total of 18 interfaces with three GPIO pins. These two modules are also available in development boards for ease of evaluation and development. Both are cheap, reliable, and based on the state of the art technologies. Thanks to its small size of only 10.3 x 9.9 x 2.4 mm, the GP-02 module can be easily embedded […]

WinX DVD Ripper Platinum supports Level-3 hardware acceleration (Sponsored)

Winx DVD Ripper Platinum

While it’s possible to tip DVDs without compression, doing so takes a lot of storage space, so most people will transcode DVD to MP4 or other video formats. One program that can help is WinX DVD Ripper that will convert an ISO image or rip a DVD to MP4 with H.264 or HEVC codec, AVI, WMV, FLV, MOV, MPEG, etc…, to save the file a hard drive or NAS, and let you watch it on a computer, HDTV, Android, iPhone, iPad, Xbox One S, PS4/5, etc… WinX DVD Ripper is a free program that works in Windows 10/11 or Mac OS, with a premium version called WinX DVD Ripper Platinum that relies on Level-3 hardware acceleration leveraging NVIDIA, AMD, or Intel GPU acceleration to slash encoding time, as well as support recovery for scratch optical media, 99-title DVDs, and provide editing features. If you own a small collection of DVDs, […]

Stellar Data Recovery Professional for Windows could save your day (Sponsored)

Stellar Data Recovery Professional

Even if you backup your data regularly, data loss can still occur for a variety of reasons be it a power failure, a user mistake, hardware failure, or even viruses or malware like ransomware. But luckily there are professional data recovery software programs that could help save your day, or even your job, such as Stellar Data Recovery Professional for Windows, previously known as Stellar Phoenix Windows Data Recovery Professional, that can recover lost or deleted data from any storage media including HDDs, SSDs, USB drives & optical media (CD or DVD), and it even works with the latest Windows 11 operating system. Stellar Data Recovery Professional supports recovery from NTFS, exFAT and FAT (FAT16/FAT32) formatted drives, even on crashed and unbootable systems, and a new feature is data retrieval from a partially burnt or scratched CD/DVD. The software can restore all types of data including documents, emails, photos, videos, […]

StarFive VisionFive single board computer officially for sale, accelerating RISC-V ecosystem development (Sponsored)

StarFive VisionFive

San Francisco, U.S. – Dec. 8, 2021- at RISC-V Summit 2021, StarFive Technology Co., Ltd. (hereinafter “StarFive”), the leader of RISC-V software and hardware ecosystem in China, announced that “VisionFive” single-board computer is officially for sale. The availability of VisionFive signifies a breakthrough in RISC-V hardware for high-end applications to help accelerate the innovations of the global RISC-V industry and promote the improvement and development of the open-source software ecosystem to drive the realization of more innovative top-layer RISC-V applications. VisionFive open-source hardware enables a new level of innovation for the RISC-V ecosystem VisionFive, the first generation of cost-effective RISC-V single-board computer is designed to run Linux, with StarFive’s JH7100 vision processing SoC. The JH7100 SoC is equipped with a 64-bit high-performance RISC-V dual-core processor with a 2MB L2 cache, running at 1.5GHz, which is excellent for high-performance computing. The JH7100 SoC is further equipped with the deep learning processing […]

Ai Thinker enters the NB-IoT LPWAN market with EC-01 modules (Sponsored)

AI Thinker NB-IoT Modules

As we all know, 2G and 3G cellular networks are gradually being sunset, and NB-IoT has been formally incorporated into 3GPP standards. The LPWAN industry has ushered in new development opportunities for the Internet of Things market. Ai-Thinker has recently released three NB-IoT series modules: EC-01/EC-01F/EC-01G. The NB-IoT series modules are equipped with the EC616S chip platform, which is an ultra-low-cost, ultra-low power, ultra-high integration NB-IoT SOC chip, fully supporting the 3GPP R13/R14 NB-IoT standards with up to 159 kbps uplink. What are the benefits of the new modules? Better signal, more spectrum Better performance (equipped with EC616S) Ultra-low power consumption, stable and reliable connectivity I/O expansion, feature-rich module Check out the comparison table between AI Thinker NB-IoT modules part of the EC-01 family below. Ai-Thinker NB-IoT series modules adopt an SMD package that is convenient for mass production at the factory, and can use AOI to do the SMT […]

Download a free trial of the SoftNeuro Deep Learning SDK for Intel and Arm targets (Sponsored)

Jetson Xavier Tensorflow Lite vs SoftNeuro

Morpho, a global research & development company established in Japan in 2004 and specialized in imaging technology, is now offering a free trial for the SoftNeuro deep learning SDK working on Intel processors with AVX2 SIMD extensions, 64-bit Arm targets, while also leveraging OpenCL and/or CUDA. Some of the advantages of SoftNeuro are that the framework is easy to use even for those without any knowledge about deep learning, it’s fast thanks to the separation of the layers and their execution patterns, and it can run on several different hardware and OS being cross-platform. SoftNeuro relies on its own storage format (DNN format) to deliver the above advantages. But you can still use models trained with any mainstream deep learning framework. TensorFlow and Keras models can be directly converted to the DNN format, while models from other frameworks can be converted first to the ONNX format and then to the […]

Lefant F1 – An ultra compact, yet powerful smart vacuum cleaner and mopping robot (Sponsored)

Levant F1

Established in 2011, Lefant Technology is a company specialized in intelligent robot technology and products, with a mission following the motto “Smart Technology, Better Family Life”, the company handles the full product lifecycle in-house from R&D to manufacturing and marketing and has launched several Lefant smart vacuum cleaners over the years including models such as Lefant U180, Lefant M201, Lefant M210, and Lefant T800. One of their latest products is the Lefant F1 robotic vacuum and mop combo that comes with a 600ml dust bin, 4000pa of suction power, and offers up to 200 minutes of runtime per charge. Some of the highlights of the Lefant F1 robotic vacuum cleaner include: A small body – The F1 robot vacuum cleaner comes in a compact size with an 11-inch diameter (about 28cm), and a 2.7-inch height (about 6.9cm) which allows it to reach locations that large robots cannot always go through. […]

Exit mobile version
EmbeddedTS embedded systems design