Android Category - Page 353 of 456 - CNX Software

October 7, 2013 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Wizarm PVR MediaBox Features Samsung Exynos 5250 Processor

Wizarm is an high-end set-top box / PVR powered by Exynos 5250 dual cortex A15 processor, with 2GB RAM, 16GB eMMC, lots of I/Os including USB 3.0 and SATA 3 support running Android 4.2, and soon Ubuntu as well. Although its main use is to handle and process media files, the device can be also used as a PC, gaming console, smart TV box, or even a development platform. Here are the specifications of the device: SoC – Samsung Exynos 5250 dual Cortex A15 up to 2GHz with Mali T-604 GPU System Memory – 2GB Storage – 16 GB eMMC. SDXC card slot, and SATA 3 connector for 2.5″ SSD or HDD I/O ports: SATA 3 USB – 2x USB 3.0, 4x USB 2.0 host ports Video – HDMI OUT, HDMI IN, DisplayPort Audio – LINE IN, LINE OUT, Optical out Connectivity: Wi-Fi 802.11 a/b/g/n (dual Wi-Fi antenna) Gigabit Ethernet […]

September 27, 2013September 27, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

How to Root Rockchip Devices in Linux

Rooting methods for devices based on Rockchip RK3066 and Rk3188 are usually only provided for Windows, so if you run Linux as your main operating system, you would either need to find a Windows based devices, or run Windows in a virtual machine. Luckily, Linux users may not have to switch to Windows anymore thanks to the instructions provided in one article that I’ll summarize below. The steps below are for Ubuntu / Debian based systems, but should be easily adaptable to other distributions. Set up ADB access to the device Install adb:

sudo apt-get install android-tools-adb

1	sudo apt-get install android-tools-adb

Edit/create /etc/udev/rules.d/51-android.rules with the following line in order to let standard users connect to the device:

SUBSYSTEM=="usb", ATTR{idVendor}=="2207", MODE="0666", GROUP="plugdev"

1	SUBSYSTEM=="usb", ATTR{idVendor}=="2207", MODE="0666", GROUP="plugdev"

Make sure that the Linux user is part of group “plugdev”:

groups user

1	groups user

Reload of the USB access rules to get the latest one on:

sudo udevadm control --reload-rules

1	sudo udevadm control --reload-rules

Add your device USB Vendor ID to adb list. e.g.:

echo "0x2207" &gt;&gt; ~/.android/adb_usb.ini

1	echo "0x2207" >> ~/.android/adb_usb.ini

Restart the adb […]

September 16, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

GOsingGO GSG-TB06 Android TV Stick Features an Ethernet Port

There’s a plethora of Android HDMI TV dongles, but all of them only provide Wi-Fi connectivity, and if you need better network performance you need to add Ethernet via an USB to Ethernet dongle. There’s now another solution, that may not be very new, with GOsingGO GSG-TB06 a mini PC based on AllWinner A10 that includes an Ethernet Port. Here are the specifications of the device: SoC – Allwinners A10 @ 1.0GHz System Memory – 1GB RAM Storage -4 to 32 GB flash + micro SD card slot Video output – HDMI & AV USB – 1x USB 2.0, 1x micro USB for power Connectivity – Ethernet (RJ45) + Wi-Fi 802.11 b/g/n (AR6103) Dimensions – 105L x 37W x 15.6Hmm The device comes with a USB power adapter, an RCA (AV) cable, and a user’s manual. The manufacturer says it’s running Android 4.1. The specs are not that great, but […]

September 7, 2013September 8, 2013 by Jean-Luc Aufranc (CNXSoft) - 36 Comments

Radxa Rock Development Boards with Rockchip RK3188 Are Available for Developers Now

As previously mentioned, work was in progress to design development boards based on Rockchip processors. Radxa Rock and Radxa Rock Lite, 2 boards powered by Rockchip RK3188, are now available to early developers, and the final versions will soon be broadly available. Here are the boards specifications: SoC – Rockchip RK3188 ARM Cortex-A9 quad core @ 1.6Ghz + Mali-400 MP4 GPU System Memory – 2GB DDR3 @ 800Mhz (1GB DDR3 @ 800Mhz for Lite version) Storage – 8GB Nand Flash (4GB Nand Flash for Lite version) + micro-SD SDXC up to 128GB Video Output – HDMI 1.4 up to 1080p@60hz, andAV output Connectivity: 10/100M Ethernet port WIFI 150Mbps 802.11b/g/n with antenna Bluetooth – Bluetooth 4.0 (Not in Lite version) Audio I/O – Audio S/PDIF, headphone jack USB – 2x USB 2.0 host port, micro USB OTG Debugging – Serial Console Misc – IR sensor, power key, recovery key, reset key, […]

September 5, 2013 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

SolidRun Announces Cubox-i Platform with Freescale i.MX6 for as low as $45

SolidRun has been providing tiny development platform such as Cubox and Cubox Pro featuring Marvell ARM compatible processors. However, the price of those platforms are well over $100, so the company decided to provide lower cost development platforms (Cubox-i) based on Freescale i.MX6 Solo/Dual Lite/Dual/Quad that sells for $45 and up. There are four versions: Cubox-i1 – Freescale i.MX6 Solo, 512 MB RAM, 10/100M Ethernet, optional Wi-Fi/Bluetooth module. Price: $44.99 Cubox-i2 – Freescale i.MX6 Duallite, 1GB RAM, 10/100M Ethernet, optional Wi-Fi Bluetooth module. Price: $69.99 Cubox-i2Ultra – Freescale i.MX6 Dual, 1GB RAM, Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $94.99 Cubox-i4Pro – Freescale i.MX6 Quad, 2GB RAM, Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $119.99 The devices measure 55mm x 55mm x 42mm. The full specifications are better seen in the comparison table found in SolidRun website. The 4 models all boot […]

August 31, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

NSZ-GU1, Sony’s Next Google TV Box will be an HDMI TV Stick

Since 2010, Sony has been working on Google TV device, and last year they announced Sony NSZ-GS7, a Google TV 2.0 set-top box. This year, nothing have been announced yet, but a few pictures of a new device have shown up in the FCC site. Sony NSZ-GU1 will be some sort of HDMI TV stick that you insert into your TV, except it looks more like a small set-top box has been glued onto an HDMI TV dongle. Here are the specifications derived from the FCC fillings and pictures: SoC- Marvel 88DE3108-A1 dual core processor (Marvell Armada 1500). System Memory – 1GB RAM Storage – 4GB NAND Flash (Toshiba THGBM5G5, If I’ve read correctly) Video I/O – HDMI output (MHL) 720p/60, micro HDMI input 720p/60 Connectivity – 802.11b/g/n WiFi (AzureWave AW-NH390), Bluetooth 3.0 USB – 1x micro USB port (for power only?) Misc – IR Blaster Power – 5V via […]

August 31, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Linux Conference Europe 2013 Schedule – Build Systems, Security, Device Tree, Debugging & Profiling Techniques, and More

Embedded Linux Conference Europe 2013 will conveniently start right after LinuxCon 2013, last 2 days (October 23-24), and take place at the same location: the Edinburgh International Conference Center, Edinburgh, United Kingdom. The Linux Foundation has published the schedule for the conference, so I’ll make my own virtual schedule with sessions that I find particularly interesting. Thursday – 24th of October 9:30 – 10:10 – Timeline For Embedded Linux by Chris Simmonds, Consultant, 2net Limited Today, Linux is woven into the fabric of our technology. Things such as printers, routers, TVs and phones all have their own “Inner Penguin”. Yet it was never originally intended to be used beyond desktop and server PCs. A lot of things had to happen before Linux could break out of the PC environment and make its way in the world as a jobbing jack-of-all-trades. Since the early beginnings of embedded Linux in the late 1990’s many people have contributed […]

August 30, 2013August 30, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Pressy Adds a Physical Button to Your Phone via the Headphone Jack

As smartphones manufacturers are mostly getting rid off physical buttons on smartphones, Pressy is looking to add a smart one (think Morse code) via your headphone jack. It allows you do common tasks, such as turning on your flashlight, taking a quick photo, or calling your girl (or man), by the click, or a few clicks, of a button. This little add-on has already proved to be popular with some, as the developers have already raised $100,000 via Kickstarter for their $17 toy. There’s does not seem to be anything special inside the button/jack, and all the “magic” occur with the app (Available for Android only at the moment), which let you configure action based on short/long key presses like you would do with Morse code. If you want to use you headphone, simply remove Pressy, insert it in its optional key chain, and place your headphone to use them as […]